CIESC Journal ›› 2021, Vol. 72 ›› Issue (S1): 560-566.DOI: 10.11949/0438-1157.20201525

• Material science and engineering, nanotechnology • Previous Articles    

Method of determining optimum mass ratio of fatty acids in composite phase change materials for thermal energy storage

ZHOU Dongyi1,2,3(),XIAO Xianghua1,XIAO Biao1,3,LIU Yicai2()   

  1. 1.School of Mechanical and Energy Engineering, Shaoyang University, Shaoyang 422000, Hunan, China
    2.School of Energy Science and Engineering, Central South University, Changsha 410083, Hunan, China
    3.Key Laboratory of Hunan Province for Efficient Power System and Intelligent Manufacturing, Shaoyang 422000, Hunan, China
  • Received:2020-10-30 Revised:2021-01-22 Online:2021-06-20 Published:2021-06-20
  • Contact: LIU Yicai

脂肪类复合相变储能材料中脂肪酸最佳质量含量的确定方法

周东一1,2,3(),肖湘华1,肖飚1,3,刘益才2()   

  1. 1.邵阳学院机械与能源工程学院,湖南 邵阳 422000
    2.中南大学能源科学与工程学院,湖南 长沙 410083
    3.湖南省高效动力系统与智能制造重点实验室,湖南 邵阳 422000
  • 通讯作者: 刘益才
  • 作者简介:周东一(1974—),男,硕士,教授,zhoudongyi2005@163.com
  • 基金资助:
    湖南省重点研发计划项目(2018GK2074);湖南省自然科学基金项目(2018JJ2366);湖南省高校创新平台开放基金项目(18K097);国家自然科学基金项目(51776226)

Abstract:

In order to obtain a satisfactory gating property of the membrane, the grafting yield must be kept in a proper range. In order to determine the optimal mass ratio of fatty acids in fatty acids composite phase change energy storage materials, three methods were proposed, the visual approaching method, the weighing measurement method and the percentage determination of penetration diameter method. And taking capric-myristic acid/expanded graphite (CA-MA/EG) composite phase change material for example, the optimum mass ratio of CA-MA in CA-MA/EG was determined by three methods. The results showed that the visual approximation method is easy to operate and mainly depends on experience and subjective judgment; the weighing measurement method is precise, but it is more complex; the determination standard can be set flexibly on the basis of the facts, and the results can accurately reflect the stability of composite phase change materials by the percentage determination of penetration diameter method.

Key words: fatty acids, composites, preparation, the optimal mass ratio, microstructure

摘要:

为确定脂肪类复合相变储能材料中脂肪酸最佳质量含量,比较了目测逼近法、称重测量法和渗透直径百分比判定法3种方法,并以确定癸酸-肉豆蔻酸/膨胀石墨(CA-MA/EG)复合相变材料中癸酸-肉豆蔻酸的最佳质量含量为例,阐述了3种方法的使用及其特点。结果表明:目测逼近法操作简单,主要依靠经验与主观判断;渗透质量百分比判定法操作略显复杂,但科学严谨、结果精确;渗透直径百分比判定法可根据实际情况灵活设置判定标准,判定结果能准确反映复合相变材料的稳定性。

关键词: 脂肪酸, 复合材料, 制备, 最佳质量含量, 显微结构

CLC Number: