微波辐射下聚醚改性聚硅氧烷的合成及其乳液的性能

CIESC Journal

微波辐射下聚醚改性聚硅氧烷的合成及其乳液的性能

成西涛1，2，李稳宏1，唐璇3，张存社2，吴素芳2，白燕2

1西北大学化工学院，陕西西安 710069；2陕西省石油化工研究设计院，陕西西安 710054；3西安石油大学化学化工学院，陕西西安710065

出版日期:2011-12-05 发布日期:2012-03-02

Synthesis of polyether modified polysiloxane by microwave radiation and the properties of organosilicon emulsion

CHENG Xitao1，2，LI Wenhong1，TANG Xuan3，ZHANG Cunshe2，WU Sufang2，BAI Yan2

1College of Chemical Engineering，Northwest University，Xi’an 710069，Shaanxi，China；2Shaanxi Research Design Institute of Petroleum and Chemical Industry，Xi’an 710054，Shaanxi，China；3College of Chemistry and Chemical Engineering，Xi’an Shiyou University，Xi’an 710065，Shaanxi，China

Online:2011-12-05 Published:2012-03-02

摘要/Abstract

摘要：

以含氢硅油与封端聚醚为原料，在微波辐射条件下合成出了聚醚改性聚硅氧烷，利用红外光谱对其结构进行了表征，采用均匀设计法对合成参数进行了优化，优化条件为：微波功率为650 W，封端聚醚与含氢硅油的摩尔比取1.1∶1，添加质量比为15 mg/kg的氯铂酸催化剂，于100 ℃反应30 min，在该条件下，平均转化率为96.8%。以合成的聚醚聚硅氧烷为主要活性单体制备出了消泡剂乳液，并考察了温度、pH值对制备的消泡剂性能的影响，结果表明制备的消泡剂在常温到98 ℃，酸性或碱性条件下的消泡及抑泡性能良好。

Abstract:

Microwave radiation was applied to synthesize polyether modified polysiloxane from methyl hydrogen silicone and capped polyether. Product structure was analyzed and identified by IR spectrometry. The optimal reaction condition was obtained by even design method as radiation power of 650 W，the molar ratio of polyether and silicone of 1.1∶1，amount of catalyst 15 mg/kg，temperature of 100 ℃ and 30 min microwave radiation. Under the optimal condition，the average conversion rate was 96.8%. Polyether modified polysiloxane was used to prepare defoamer emulsion and the antifoaming performance was investigated. The results showed the defoamer functions from room temperature to 98 ℃，and from acidity to alkalescence conditions.

成西涛1，2，李稳宏1，唐璇3，张存社2，吴素芳2，白燕2. 微波辐射下聚醚改性聚硅氧烷的合成及其乳液的性能[J]. CIESC Journal.

CHENG Xitao1，2，LI Wenhong1，TANG Xuan3，ZHANG Cunshe2，WU Sufang2，BAI Yan2. Synthesis of polyether modified polysiloxane by microwave radiation and the properties of organosilicon emulsion[J]. .