制造设备关键性能指标的基准设定

doi:10.3969/j.issn.0438-1157.2012.09.046

化工学报 ›› 2012, Vol. 63 ›› Issue (9): 2958-2964.DOI: 10.3969/j.issn.0438-1157.2012.09.046

制造设备关键性能指标的基准设定

沈清泓, 苏宏业, 朱理, 卢山

浙江大学智能系统与控制研究所, 浙江杭州 310027

收稿日期:2012-06-09 修回日期:2012-06-19 出版日期:2012-09-05 发布日期:2012-09-05
通讯作者: 苏宏业
作者简介:沈清泓(1985-),男,博士研究生。
基金资助:
国家创新研究群体科学基金项目(60721062)。

Benchmark determination for key performance indicators of manufacturing equipment

SHEN Qinghong, SU Hongye, ZHU Li, LU Shan

Institute of Cyber-Systems and Control, Zhejiang University, Hangzhou 310027, Zhejiang, China

Received:2012-06-09 Revised:2012-06-19 Online:2012-09-05 Published:2012-09-05
Supported by:
supported by the National Creative Research Groups Science Foundation of China(60721062).

摘要/Abstract

摘要： 详细分析流程行业制造执行系统关键性能指标评估体系,建立了关于制造设备的关键性能指标集合。针对该评估体系的动态分析部分,提出了基于稳态优化理论的制造设备关键性能指标的基准设定方法,最后以二元精馏塔为例分析了其生产率的计算以及基准的确定。

关键词: 制造执行系统, 关键性能指标, 基准, 稳态优化

Abstract: This paper detailed analyses the evaluation architecture of key performance indicators(KPI)for manufacturing execution system(MES)in process industry,and a collection of KPI for manufacturing equipment is established.According to the dynamic analysis part of this evaluation architecture,a method based on steady-state optimization is proposed to determine the benchmark for KPI of manufacturing equipment.Finally,the calculation and benchmark determination for the produced ratio of a distillation column are achieved as an application case.

Key words: manufacturing execution system, key performance indicators, benchmark, steady-state optimization

中图分类号:

TP311

沈清泓, 苏宏业, 朱理, 卢山. 制造设备关键性能指标的基准设定[J]. 化工学报, 2012, 63(9): 2958-2964.

SHEN Qinghong, SU Hongye, ZHU Li, LU Shan. Benchmark determination for key performance indicators of manufacturing equipment[J]. CIESC Journal, 2012, 63(9): 2958-2964.

参考文献 15

[1]	Wang Hong’an(王宏安),Rong Gang(荣冈),Feng Mei(冯梅),Zhang Zhaojun(张朝俊).Chemical Manufacturing Executive System MES(化工生产执行系统MES)[M].Beijing:Chemical Industry Press,2007:1-18
[2]	Chen Xiaoguo(陈孝国).The ambiguous synthetical evaluating mathematic model of machine [J].Coal Mine Machinery(煤矿机械),2004,8:52-53
[3]	Zhu Mingjie(朱明杰),Chen Shaofu(陈绍甫).The exploration on use of machine equipment evaluation method[J].Journal of Yunnan Agricultural University(云南农业大学学报),2006,21(1):99-102
[4]	Ma Liming(马黎明),Ni Yanrong(倪炎榕).Key equipment evaluation method research and application of chemical enterprise[J].Machinery Manufacturing(机械制造),2008,46(531):12-15
[5]	Zhang Chengwen(张成文),Sun Guangyan(孙光艳).The study of calculating of the rate of depreciation in the assessment of machinery and equipment[J].Science and Management(科学与管理),2009,3:6-7
[6]	Ali Syed Irshad,Yousof Jamil,Khan Memmona Rauf,Masood Syed Ather.Evaluation of performance in manufacturing organization through productivity and quality [J].African Journal of Business Management,2011,5(6):2211-2219
[7]	Ana Teresa Ochoa Andrade.Application of multivariate techniques in the evaluation of melt granulation products [J].Brazilian Journal of Pharmaceutical Sciences,2011,47(4):733-741
[8]	ISO/DIS 22400-2,Automation systems and integration-Key performance indicators for manufacturing operations management-Part 2:Definitions and descriptions[S]
[9]	Gu Yingwei(顾英伟),Li Juan(李娟).Architectural study on key performance indicators[J].Modern Management Science(现代管理科学),2007,6:79-80
[10]	Coelli Timothy J,Rao D S Prasada,O’ Donnell Christopher J,Battese George E.An Introduction to Efficiency and Productivity Analysis(效率和生产率分析导论)[M].Liu Dacheng(刘大成),trans.2nd ed.Beijing:Tsinghua University Press,2009:30-56
[11]	Song Haihua(宋海华).Distillation Simulation(精馏模拟)[M].Tianjin:Tianjin University Press,2005:2-10
[12]	Wang Shuqing(王树青),Dai Liankui(戴连奎),Yu Ling(于玲).Process Control Engineering(过程控制工程)[M].2nd ed.Beijing:Chemical Industry Press,2008:224-258
[13]	Kumar Aditya,Daoutidis Prodromos.Nonlinear dynamics and control of process systems with recycle [J].Journal of Process Control,2002,12:475-484
[14]	Tosukhowong Thidarat.Dynamic real-time optimization and control of an integrated plant.North Avenue :Georgia Institute of Technology,2006
[15]	Yu Mingsheng(余明升),Gu Xiuping(谷秀平).Steady state optimization of distillation column based on PSO [J].Chemical Engineering&Equipment(化学工程与装备),2010,5:44-47

制造设备关键性能指标的基准设定

Benchmark determination for key performance indicators of manufacturing equipment

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 15

相关文章 4

编辑推荐

Metrics

本文评价

[1]	韩红桂, 刘峥, 乔俊飞. 基于区间二型模糊神经网络污水处理过程溶解氧浓度控制[J]. 化工学报, 2018, 69(3): 1182-1190.
[2]	邹涛, 王丁丁, 潘昊, 苑明哲, 季忠宛. 从区间模型预测控制到双层结构模型预测控制[J]. 化工学报, 2013, 64(12): 4474-4483.
[3]	肖力墉, 苏宏业, 苗宇, 褚健. 制造执行系统功能体系结构 [J]. 化工学报, 2010, 61(2): 359-364.
[4]	李德芳, 张朝俊, 蒋白桦, 刘伟. 面向流程企业的可配置MES体系结构 [J]. 化工学报, 2010, 61(2): 352-358.