Midrex竖炉化学能与物理能匹配及最大利用的数值分析

doi:10.3969/j.issn.0438-1157.2012.12.024

化工学报 ›› 2012, Vol. ›› Issue (12): 3906-3913.DOI: 10.3969/j.issn.0438-1157.2012.12.024

• 催化、动力学与反应器 • 上一篇

Midrex竖炉化学能与物理能匹配及最大利用的数值分析

李强¹, 刘炳南¹, 冯明霞², 邹宗树¹

1. 东北大学材料与冶金学院, 辽宁沈阳 110004;
2. 辽宁科技学院冶金工程学院, 辽宁本溪 117022

收稿日期:2012-05-11 修回日期:2012-09-01 出版日期:2012-12-05 发布日期:2012-12-05
通讯作者: 李强
作者简介:李强(1978-),男,博士,讲师。
基金资助:
国家自然科学基金项目(51174053);国家科技支撑计划重点项目(2011BAE04B01,2011BAE04B02)。

Numerical analysis on proportioning and maximum utilization of physical and chemical energies in Midrex shaft furnace

LI Qiang¹, LIU Bingnan¹, FENG Mingxia², ZOU Zongshu¹

1. School of Materials and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China;
2. School of Metallurgy, Liaoning Institute of Science and Technology, Benxi 117022, Liaoning, China

Received:2012-05-11 Revised:2012-09-01 Online:2012-12-05 Published:2012-12-05
Supported by:
supported by the National Natural Science Foundation of China(51174053)and the Key Projects of the National Science & Technology Pillar Program(2011BAE04B01,2011BAE04B02).

摘要/Abstract

摘要： 针对诸如Midrex类型直接还原炼铁竖炉生产过程中存在煤气还原势化学能未能充分利用问题,设计出一种上部增设吹氧装置将过剩化学势转变成热能的竖炉。新型竖炉实现煤气化学能与物理能匹配,从而实现能的最大化利用和减少煤气消耗。根据质量和能量守恒建立了竖炉静态模型对比分析传统和新型竖炉的煤气消耗,同时开发一维动力学模型计算了炉内温度及煤气成分变化,获得了在热力学上盈余煤气的体积分数,即还原煤气过剩化学能的分布。结果表明,吹氧竖炉上部气固两相温度提高,CO和H₂浓度明显下降,因而煤气利用率显著增加。在吹氧量为536.40 m³·h^-1,吹氧位置为6.5 m高度情况下,煤气量消耗下降25.94%,尾气还原势下降53.69%。

关键词: Midrex 竖炉, 过剩化学能, 能量匹配, 吹氧, 煤气消耗

Abstract: Aiming at the incomplete utilization of chemical energy of reducing gas in a shaft furnace like Midrex for direct reduced iron production,oxygen blowing into the upper part of the furnace was proposed to transform the excessive chemical energy into thermal energy.In this way,the proportioning and balancing between chemical and thermal energies of reducing gas in the furnace could be realized,and their maximum utilization and thus gas consumption reduction could be expected.A mass and heat balances model was developed to analyze the gas consumption of both traditional and newly proposed processes.A one-dimensional kinetic model was developed to calculate the composition and temperature profiles of both gas and solid phases in the furnace.The distribution of thermodynamic excess,i.e.the excessive chemical energy of reducing gas was also obtained.The results showed that with oxygen blowing into the upper part of the furnace,the temperatures of both gas and solid phases increased and the concentrations of CO and H₂ decreased,and thus gas utilization was increased significantly.In the case of 536.40 m³穐^-1 oxygen blowing at the furnace height of 6.5m,gas consumption decreased by 25.94% and off-gas reduction potential decreased by 53.69%.

Key words: Midrex shaft furnace, chemical energy excess, energy proportioning, oxygen blowing, gas consumption

中图分类号:

TF557

李强, 刘炳南, 冯明霞, 邹宗树. Midrex竖炉化学能与物理能匹配及最大利用的数值分析[J]. 化工学报, 2012, (12): 3906-3913.

LI Qiang, LIU Bingnan, FENG Mingxia, ZOU Zongshu. Numerical analysis on proportioning and maximum utilization of physical and chemical energies in Midrex shaft furnace[J]. CIESC Journal, 2012, (12): 3906-3913.

参考文献 14

[1]	Pichestapong P,Rao Y K.Modelling of the COREX hot metal process//Challenges in Process Intensification[C].Vancouver,Canada,1996:67-83
[2]	Yao Xiaoguang(姚晓光),Xu Wanren(徐万仁),Zheng Shaobo(郑少波).Theoretical analysis on using top gas-recycle and coal-injection technologies to reduce fuel consumption of COREX/FINEX process[J].Baosteel Technology(宝钢技术),2008,6:23-29
[3]	Holappa L,Kekkonen M.Constraints of iron production in blast furnace and with alternative methods//The 4th International Congress on the Science and Technology of Ironmaking[C].2006:279-282
[4]	Ziebik A,Lampert K,Szega M.Energy analysis of a blast furnace system operating with the Corex process and CO2 removal[J].Energy,2008,33(2):199-205
[5]	Chu M S,Nogami H,Yagi J.Numerical analysis on blast furnace performance under operation with top gas recycling and carbon composite agglomerates charging[J].ISIJ International,2004,44(12):2159-2167
[6]	Amiri A,Vafai K.Transient analysis of incompressible flow through a packed bed[J].Int. J. Heat Mass Transfer,1998,41:4259-4279
[7]	Wen D S,Ding Y L.Heat transfer of gas flow through a packed bed[J].Chemical Engineering Science,2006,61:3532-3542
[8]	Mueller G E.Radial void fraction distributions in randomly packed fixed beds of uniformly sized spheres in cylindrical containers[J].Powder Technology,1992,72:269-275
[9]	Vladimir P,John T,Oleg O.Analysis of performance of an iron-bath reactor using computational fluid dynamics[J].Applied Mathematical Modeling,2002,26:203-221
[10]	Wang Z L,Ding Y L,Ghadiri M.Flow of a gas-solid two-phase mixture through a packed bed[J].Chemical Engineering Science,2004,59:3071-3079
[11]	Poirier D R,Geiger G H.Transport Phenomena in Materials Processing[M].TMS,1994:273-275
[12]	Rao Y K,Pichestapong P.Modeling of the Midrex direct-reduction iron making process:mass transfer and virtual equilibrium at steady state//15th CMMI Congress[C].Johannesburg,1994:81-92
[13]	Zhang Tie(张铁)Yan Jiabin(闫家斌).Numerical Analysis(数值分析)[M].Beijing:Metallurgical Industry Press,2001:239-242
[14]	Parisi D R,Laborde M A.Modeling of counter current moving bed gas-solid reactor used in direct reduction of iron ore[J].Chemical Engineering Journal,2004,104:35-43

Midrex竖炉化学能与物理能匹配及最大利用的数值分析

Numerical analysis on proportioning and maximum utilization of physical and chemical energies in Midrex shaft furnace

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 14

相关文章 0

编辑推荐

Metrics

本文评价