Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

CIESC Journal ›› 2010, Vol. 18 ›› Issue (2): 239-243.

Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

危凤¹, 沈波¹, 陈明杰¹, 赵迎宪¹, 邵立平²

1. Ningbo Institute of Technology, Zhejiang University, Ningbo 315100, China;
2. Zhejiang NHU Company Ltd., Xinchang 312500, China

收稿日期:2009-08-12 修回日期:2009-12-26 出版日期:2010-04-28 发布日期:2010-04-28
通讯作者: WEI Feng,E-mail:weifeng@nit.net.cn
基金资助:
Supported by the Natural Science Foundation of Ningbo(2009A610153)

Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

WEI Feng¹, SHEN Bo¹, CHEN Mingjie¹, ZHAO Yingxian¹, SHAO Liping²

1. Ningbo Institute of Technology, Zhejiang University, Ningbo 315100, China;
2. Zhejiang NHU Company Ltd., Xinchang 312500, China

Received:2009-08-12 Revised:2009-12-26 Online:2010-04-28 Published:2010-04-28
Supported by:
Supported by the Natural Science Foundation of Ningbo(2009A610153)

摘要/Abstract

摘要： A new feeding mode for a simulated moving bed(SMB) is proposed.The outlet stream from zone Ⅱ is collected at regular intervals.The concentration of the solution is increased by dissolving raw materials and then fed to zone Ⅲ as the feed stream during the next collection interval.In this feeding mode,the concentration of the stream fed to zone Ⅲ is identical to that of original feed,while in a conventional SMB,the feed is diluted by mix-ing with the outlet stream of zone Ⅱ before feeding to zone III.The new feeding mode increases the inlet concentra-tion of zone Ⅲ.A modeling investigation shows that higher inlet concentration of zone Ⅲ increases the height of concentration band in SMB,improving the separation performance significantly.In comparison with the traditonal feeding mode,the new feeding mode increases the productivity by 23.52% and decreases the solvent consumption by 22.56%,so as to increase the raffinate and extract concentrations by 53.17% and 20.38%,respectively.The col-lection interval for the outlet stream from zone Ⅱ has no effect on the separation performance after reaching the steady state,so that the collection interval can be increased to make the operation more convenient.

关键词: simulated moving bed, feeding mode, modified operation, simulation

Abstract: A new feeding mode for a simulated moving bed(SMB) is proposed.The outlet stream from zone Ⅱ is collected at regular intervals.The concentration of the solution is increased by dissolving raw materials and then fed to zone Ⅲ as the feed stream during the next collection interval.In this feeding mode,the concentration of the stream fed to zone Ⅲ is identical to that of original feed,while in a conventional SMB,the feed is diluted by mix-ing with the outlet stream of zone Ⅱ before feeding to zone III.The new feeding mode increases the inlet concentra-tion of zone Ⅲ.A modeling investigation shows that higher inlet concentration of zone Ⅲ increases the height of concentration band in SMB,improving the separation performance significantly.In comparison with the traditonal feeding mode,the new feeding mode increases the productivity by 23.52% and decreases the solvent consumption by 22.56%,so as to increase the raffinate and extract concentrations by 53.17% and 20.38%,respectively.The col-lection interval for the outlet stream from zone Ⅱ has no effect on the separation performance after reaching the steady state,so that the collection interval can be increased to make the operation more convenient.

Key words: simulated moving bed, feeding mode, modified operation, simulation

危凤, 沈波, 陈明杰, 赵迎宪, 邵立平. Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity[J]. CIESC Journal, 2010, 18(2): 239-243.

WEI Feng, SHEN Bo, CHEN Mingjie, ZHAO Yingxian, SHAO Liping. Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity[J]. , 2010, 18(2): 239-243.

参考文献

1 Broughton, D.B., Gerhold, C.G., “Continuous sorption process employing fixed bed of sorbent and moving inlets outlets”, U.S. Patent, 2985589 (1961). 2 Rajendran, A., Paredes, G., Mazzotti, M., “Simulated moving bed chromatography for the separation of enantiomers”, J. Chromatogr. A, 1216, 709-738 (2009). 3 Seidel-Morgenstern, A., Keβler, L.C., Kaspereit, M., “New developments in simulated moving bed chromatography”, Chem. Eng. Technol., 31 (6), 826-837 (2008). 4 Gomes, P.S., Minceva, M., Rodrigues, A.E., “Simulated moving bed technology:old and new”, Adsorption, 12, 375-392 (2006). 5 Zhang, W., Lin, B.C., “Separation of ginsenoside Rb1 by simulated moving bed chromatography”, Fine Chemicals, 24 (6), 554-558 (2007). (in Chinese) 6 Wei, F., Zhao, Y.X., “Separation of capsaicin from capsaicinoids by simulated moving bed chromatography”, J. Chromatogr. A, 1187, 281-284 (2008). 7 Wei, F., Shen, B., Chen, M.J., “From analytical chromatography to simulated moving bed chromatography:Resolution of omeprazole enantiomers”, Ind. Eng. Chem. Res., 45,1420-1425 (2006). 8 Jupke, A., Epping, A., Schmidt-Traub, H., “Optimal design of batch and simulated moving bed chromatographic separation processes”, J. Chromatogr. A, 944, 93-117 (2002). 9 Giddings, J.C., Unified Separation Science, John Wiley & Sons, Inc. NewYork (1991). 10 Schramm, H., Kienle, A., Kaspereit, M., Seidel-Morgenstern, A., “Improved operation of simulated moving bed processes through cyclic modulation of feed flow and feed concentration”, Chem. Eng. Sci., 58, 5217-5227 (2003). 11 Zhang, Z., Morbedelli, M., Mazzotti, M., “Experimental assessment of PowerFeed chromatography”, AIChE J., 50 (3), 625-632 (2004). 12 Lübke, R., Seidel-Morgenstern, A., Tobiska, L., “Numerical method for accelerated calculation of cyclic steady state of ModiCon-SMBprocesses”, Comput. Chem. Eng., 31, 258-267 (2007). 13 Wei, F., Zhao, Y.X., “Modeling comparison between novel and traditional feed modes of simulated moving bed”, Ind. Eng. Chem. Res., 47, 3200-3206 (2008). 14 Haag, J., Vande Wouwer, A., Lehoucq, S., Saucez, P., “Modeling and simulation of a SMB chromatographic process designed for enantioseparation”, Control Eng. Pract., 9, 921-928 (2001). 15 Vande Wouwer, A., Saucez, P., Schinesser, W.E., “Simulated of distributed parameter systems using a matlab-based method of lines toolbox:chemical engineering applications”, Ind. Eng. Chem. Res., 43, 3469-3477 (2004). 16 Dünnebier, G., Weirich, I., Klatt, K.U., “Computationally efficient dynamic modelling and simulation of simulated moving bed chromatographic processes with linear isotherms”, Chem. Eng. Sci., 53, 2537-2546 (1998). 17 Pais, L.S., Loureiro, J.M., Rodrigues, A.E., “Modeling strategies for enantiomers separation by SMB chromatography”, AIChE J., 44, 561-569 (1998). 18 Migliorini, C., Mazzotti, M., Morbidelli, M., “Simulated moving-bed units with extra-column dead volume”, AIChE J., 45, 1411-1421(1999). 19 Lu, J.G., “A non-linear non-ideal model of simulated moving bed chromatography for chiral separations”, Chin. J. Chem. Eng., 11, 234-239 (2003). 20 Lü, Y.B., Wei, F., Shen, B., Ren, Q.L., Wu, P.D., “Modeling, simulation of a simulated moving bed for separation of phosphatidylcholine from soybean phospholipids”, Chin. J. Chem. Eng., 14, 171-177 (2006). 21 Wang, S., Ma, Z.F., Yao, H.Q., “Modeling of simulated moving-bed adsorption”, Chem. Eng., 34 (2), 8-12 (2006). (in Chinese) 22 Mazzotti, M., Storti, G., Morbidelli, M., “Optimal operation of simulated moving bed units for nonlinear chromatographic separations”, J. Chromatogr. A, 769, 3-24 (1997). 23 Migliorini, C., Mazzotti, M., Morbidelli, M., “Continuous chromatographic separation through simulated moving bed under linear and nonlinear conditions”, J. Chromatogr. A, 827, 161-173 (1998).

[1]	田晖, 黄智贤, 邱挺, 王晓达, 吴燕翔. 反应精馏合成乙酸丁酯的实验和模拟[J]. Chinese Journal of Chemical Engineering, 2012, 20(5): 980-987.
[2]	周力行, 胡瓅元. 大涡模拟研究两相燃烧的进展 (II) 复杂气固流动和煤燃烧的大涡模拟[J]. Chinese Journal of Chemical Engineering, 2012, 20(4): 609-616.
[3]	危凤, 沈波, 陈明杰, 周先波, 赵迎宪. 双进料模拟移动床分离α-生育酚[J]. Chinese Journal of Chemical Engineering, 2012, 20(4): 673-678.
[4]	崔永章, 田茂诚, 张林华, 李广鹏, 朱建宾. 扭带管内高湿空气对流凝结换热三维数值模拟[J]. Chinese Journal of Chemical Engineering, 2012, 20(4): 686-692.
[5]	洪宇翔, 邓先和, 张连山. 缩放管内插双扭带复合强化传热的数值模拟[J]. CIESC Journal, 2012, 20(3): 589-601.
[6]	周力行, 李科, 王方. 两相燃烧大涡模拟研究进展（I）喷雾燃烧大涡模拟[J]. CIESC Journal, 2012, 20(2): 205-211.
[7]	康锴, 卢滇楠, 刘铮. 蛋白质在温度响应性PNIPAAm接枝硅胶表面吸附和解吸过程：分子模拟和实验研究[J]. CIESC Journal, 2012, 20(2): 284-293.
[8]	杨子浩, 金敏, 李明远, 董朝霞, 闫鹏. Implication of Geochemical Simulation for CO₂ Storage Using Data of York Reservoir[J]. CIESC Journal, 2011, 19(6): 1052-1059.
[9]	李文彬, 刘伯潭, (K. T. YU)余国琮, 袁希钢. A New Model for the Simulation of Distillation Column[J]. CIESC Journal, 2011, 19(5): 717-725.
[10]	朱玉俊, 周建海, 胡军, 刘洪来, 胡英. Computer Simulation of Adsorption and Separation of CO₂/CH₄ in Modified COF-102[J]. Chinese Journal of Chemical Engineering, 2011, 19(5): 709-716.
[11]	朱春英, 付涛涛, 高习群, 马友光. Numerical Simulation of Concentration Field on Liquid Side around Bubble during Rising and Coalescing Process in Non-Newtonian Fluid[J]. CIESC Journal, 2011, 19(5): 799-807.
[12]	孙志民, 刘春江, 余国琮, 袁希钢. Prediction of Distillation Column Performance by Computational Mass Transfer Method[J]. CIESC Journal, 2011, 19(5): 833-844.
[13]	Jie Xiao, Yinlun Huang. Design of Sustainable Multifunctional Nanocoatings:A Goal-driven Multiscale Systems Approach [J]. CIESC Journal, 2011, 19(4): 666-673.
[14]	郭敬, 武向红, 荆树宏, 张谦, 郑丹星. Vapor-Liquid Equilibrium of Ethylene+Mesitylene System and Process Simulation for Ethylene Recovery [J]. CIESC Journal, 2011, 19(4): 543-548.
[15]	廉景燕, 刘天雨, 张瑞玲. Experimental Investigation and Numerical Simulation for Bacteria Transport in Soil[J]. CIESC Journal, 2011, 19(2): 327-333.

Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价