化工学报 ›› 2011, Vol. 62 ›› Issue (1): 119-124.

• 分离工程 • 上一篇    下一篇

超声强化多通道陶瓷膜微滤超细TiO2悬浮液

王凤来,陈亚中,崔鹏,熊伟   

  1. 合肥工业大学化工学院,安徽省可控化学与材料化工重点实验室,安徽 合肥 230009
  • 出版日期:2011-01-05 发布日期:2011-01-05

Microfiltration of fine TiO2 suspension with ultrasound-enhanced multi-channel ceramic membrane

WANG Fenglai, CHEN Yazhong, CUI Peng, XIONG Wei   

  • Online:2011-01-05 Published:2011-01-05

摘要:

针对超声强化膜分离过程能耗高的问题,提出并设计了一种新型超声强化膜分离操作方式,并进行了超声强化陶瓷膜微滤超细TiO2颗粒悬浮液的研究。考察了超声场参数、操作时间及溶液环境对多通道陶瓷膜微滤过程的影响规律,并分析了此操作方式强化陶瓷膜微滤颗粒悬浮体系的机理。结果表明,该操作方式能够获得较高膜通量恢复率及平均膜通量,同时超声能量消耗减小了90.0%以上;降低超声频率及提高功率,有利于膜通量恢复,在超声参数45 kHz0.33 W·cm-2条件下,膜通量恢复到初始值的94.0%;控制超声辐射时间0.167 min,微滤时间8 min时,平均膜通量提高了61.5%;降低悬浮液颗粒浓度及提高料液温度都有利于超声场强化陶瓷膜微滤过程。

关键词: FONT-SIZE: 10.5pt, mso-bidi-font-size: 11.0pt, mso-ascii-font-family: Times New Roman, mso-hansi-font-family: Times New Roman, mso-bidi-font-family: Times New Roman, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">超声强化;多通道陶瓷膜;微滤;FONT-SIZE: 10.5pt, mso-bidi-font-size: 11.0pt, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA, mso-fareast-font-family: 宋体" lang=EN-US>TiO2FONT-SIZE: 10.5pt, mso-bidi-font-size: 11.0pt, mso-ascii-font-family: Times New Roman, mso-hansi-font-family: Times New Roman, mso-bidi-font-family: Times New Roman, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">悬浮液

Abstract:

A new operation mode for ultrasound-enhanced membrane microfiltration was designed in order to reduce energy consumption.Microfiltration of TiO2 suspension with ultrasound-enhanced multi-channel ceramic membrane was demonstrated.Factors that influenced membrane microfiltration, such as ultrasonic parameters, operating time, TiO2 concentration, as well as suspension temperature, were discussed.The primary mechanism for enhancing the effect of ultrasound was analyzed.The results showed that with the operation mode, the flux recovery rate and average permeation flux were better, and the ultrasonic energy consumption was reduced by over 90.0%.Lower ultrasonic frequency and higher power density were conducive to restoration of the initial flux.Under the optimum condition, ultrasonic frequency of 45 kHz and power density of 0.33 W·cm-2, the flux recovery rate could reach 94.0%.With ultrasonic radiation time of 0.167 min and microfiltration for 8 min, the average flux could increase 61.5%.Lower TiO2 concentration and higher temperature benefited the microfiltration process.

Key words: FONT-SIZE: 10.5pt, mso-bidi-font-size: 11.0pt, mso-ascii-font-family: Times New Roman, mso-hansi-font-family: Times New Roman, mso-bidi-font-family: Times New Roman, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">超声强化;多通道陶瓷膜;微滤;FONT-SIZE: 10.5pt, mso-bidi-font-size: 11.0pt, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA, mso-fareast-font-family: 宋体" lang=EN-US>TiO2FONT-SIZE: 10.5pt, mso-bidi-font-size: 11.0pt, mso-ascii-font-family: Times New Roman, mso-hansi-font-family: Times New Roman, mso-bidi-font-family: Times New Roman, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">悬浮液