化工学报 ›› 2008, Vol. 59 ›› Issue (11): 2910-2915.

• 材料化学工程与纳米技术 • 上一篇    下一篇

层层自组装纤维素硫酸钠-壳聚糖复合膜

谢瑜亮;王明君;姚善泾   

  1. 浙江大学化学工程与生物工程学系
  • 出版日期:2008-11-05 发布日期:2008-11-05

Layer-by-layer self-assembly complex membrane composed of sodium cellulose sulfate-chitosan

XIE Yuliang;WANG Mingjun;YAO Shanjing   

  • Online:2008-11-05 Published:2008-11-05

摘要:

采用层层自组装技术,以具有良好生物相容性的多糖类物质——壳聚糖(chitosan)和纤维素硫酸钠(NaCS)为原料,制备了NaCS-chitosan复合膜。使用扫描电子显微镜观察复合膜形貌特征以表征自组装复合膜的形成,使用红外光谱分析了复合膜形成机理,使用紫外-可见光吸收研究了复合膜形成的动力学特征。同时还考察了各实验因素对NaCS-chitosan复合膜形成过程的影响。 结果表明,制备条件对复合膜形成过程有明显的影响,在现有的制备条件下,层层自组装复合膜的形成是一个一级反应过程。

关键词:

层层自组装技术, 壳聚糖, 纤维素硫酸钠, 复合膜

Abstract:

By using the layer-by-layer self-assembly technique,the complex membrane was prepared from sodium cellulose sulfate(NaCS)and chitosan,two kinds of polysaccharides with excellent biocompatibility.The process of membrane formation was studied,and the morphology of complex membrane,membrane formation mechanism,and dynamic features of the complex membrane formation were investigated by using scanning electron microscope(SEM),infrared spectroscopy,ultraviolet-visible light absorption respectively.The preparation conditions would affect significantly the formation of complex membrane and the layer-by-layer self-assembly formation was a one-order reaction process under the current preparation conditions.

Key words:

层层自组装技术, 壳聚糖, 纤维素硫酸钠, 复合膜