化工学报 ›› 2015, Vol. 66 ›› Issue (S2): 108-115.DOI: 10.11949/j.issn.0438-1157.20151061

• 流体力学与传递现象 • 上一篇    下一篇

小型LNG装置缠绕管换热器的设计

李京瑶1,2, 公茂琼1, 汤奇雄1,2, 孙兆虎3, 邹鑫1, 陈高飞1, 吴剑峰1   

  1. 1. 中国科学院理化技术研究所, 北京 100190;
    2. 中国科学院大学, 北京 100049;
    3. 中科睿凌低温设备有限公司, 北京 101499
  • 收稿日期:2015-07-06 修回日期:2015-07-15 出版日期:2015-08-31 发布日期:2015-08-31
  • 通讯作者: 公茂琼
  • 基金资助:

    国家科技重大专项(2011ZX05039-001-004);中科院理化所所长基金(2014-(CGF))。

Design of coiled-wound heat exchanger in small plant of LNG

LI Jingyao1,2, GONG Maoqiong1, TANG Qixiong1,2, SUN Zhaohu3, ZOU Xin1, CHEN Gaofei1, WU Jianfeng1   

  1. 1. Technical Institute of Physics and Chemistry, CAS, Beijing 100190, China;
    2. University of Chinese Academy of Sciences, Beijing 100049, China;
    3. Refrigeration and Liquefaction Equipment Co., Ltd., Beijing 101499, China
  • Received:2015-07-06 Revised:2015-07-15 Online:2015-08-31 Published:2015-08-31
  • Supported by:

    supported by the National Major Projects of China(2011ZX05039-001-004)and the Director Foundation of TIPC(2014-(CGF)).

摘要:

缠绕管换热器在天然气液化、空气分离、低温甲醇洗等低温领域有广泛的应用。提出一种可用于缠绕管换热器的设计方法,基于该方法采用分段微元法编写了缠绕管换热器设计程序;并运用该程序对已有换热器进行核算,验证了设计方法的可靠性;同时设计了用于小型LNG装置的缠绕管换热器,为工程上设计用于LNG装置的多股流缠绕管式换热器提供参考。

关键词: LNG, 缠绕管换热器, 程序设计

Abstract:

Coiled-wound heat exchanger has a wide range of applications in the area of liquefied natural gas(LNG),air separation and rectisol process.This paper presents a design method of coiled-wound heat exchanger,and based on the method,piecewise infinite simal method is used to write programs to design coiled-wound heat exchanger.An existing heat exchanger is check calculated with the programs to verify the reliability of the design method.Meanwhile,a coiled-wound heat exchanger used in small plant of LNG is designed,which provides a reference for engineering designing of multi-stream coiled-wound heat exchangers.

Key words: LNG, coiled-wound heat exchanger, program design

中图分类号: