基于SOFC/GT/TCO2复合动力循环和溴化锂制冷机的冷热电联供系统性能

doi:10.11949/j.issn.0438-1157.20181102

化工学报 ›› 2018, Vol. 69 ›› Issue (S2): 341-349.DOI: 10.11949/j.issn.0438-1157.20181102

基于SOFC/GT/TCO₂复合动力循环和溴化锂制冷机的冷热电联供系统性能

刘洋, 韩吉田, 游怀亮

山东大学能源与动力工程学院, 山东济南 250061

收稿日期:2018-09-28 修回日期:2018-10-05 出版日期:2018-12-31 发布日期:2018-12-31
通讯作者: 韩吉田
基金资助:
国家自然科学基金项目（51376110）；国家自然科学基金国际（地区）合作与交流项目（41761144067）。

Performance of combined cooling, heating and power system based on SOFC/GT/TCO₂ integrated power cycle and LiBr-water absorption chiller

LIU Yang, HAN Jitian, YOU Huailiang

School of Energy and Power Engineering, Shandong University, Jinan 250061, Shandong, China

Received:2018-09-28 Revised:2018-10-05 Online:2018-12-31 Published:2018-12-31
Supported by:
supported by the National Natural Science Foundation of China (51376110) and the Project of International (regional) Cooperation and Exchanges (41761144067).

摘要/Abstract

摘要：

提出了一种新型冷热电联供系统，通过TCO₂循环和溴化锂制冷机回收SOFC/GT循环的排烟余热，实现对外供冷、供热和供电。建立了联供系统热力性能的数学模型，对系统进行了能量分析和（火用）分析，并研究了空燃比、SOFC压力、CO₂工质流率、CO₂工质分流比和TCO₂泵出口压力对系统性能的影响。研究结果表明，在额定工况下，系统的净发电效率为70.79%，系统总（火用）效率为68.29%，综合能源利用率为108.5%。增大空燃比、CO₂工质分流比或降低SOFC工作压力、CO₂工质流率和TCO₂泵出口压力可提高联供系统的综合能源利用率；增大SOFC工作压力、TCO₂泵出口压力或降低空燃比可提高联供系统的净发电效率和总（火用）效率，随CO₂工质流率和CO₂工质分流比的增大，净发电效率和总（火用）效率先降低后增大。

Abstract:

A novel combined cooling, heating and power system is proposed. The waste heat of the exhaust gas from the SOFC/GT hybrid system is recovered by a transcritical CO₂ cycle and a LiBr-water absorption chiller for cooling, heating and power supply. Thermodynamic mathematical models of the CCHP system are developed, then energy and exergy analyses are used to analyze the performance of the CCHP system. The effect of air-fuel ratio, SOFC pressure, CO₂ flow rate, CO₂ split ratio and the outlet pressure of the TCO₂ pump on the performance of the entire system are studied. The results show that the overall energy utilization, the net power generation and the exergy efficiencies of the entire system can reach 108.5%, 70.79% and 68.29%, respectively, under the specified condition. The overall energy utilization efficiency can be improved by increasing air-fuel ratio or CO₂ split ratio, and decreasing SOFC pressure, CO₂ flow rate or the outlet pressure of the TCO₂ pump. The net power generation and the exergy efficiencies can be improved by increasing SOFC pressure or the outlet pressure of the TCO₂ pump, or by decreasing air-fuel ratio. The net power generation and the exergy efficiencies first decrease and then increase with the increase in CO₂ flow rate or CO₂ split ratio.

中图分类号:

刘洋, 韩吉田, 游怀亮. 基于SOFC/GT/TCO₂复合动力循环和溴化锂制冷机的冷热电联供系统性能[J]. 化工学报, 2018, 69(S2): 341-349.

LIU Yang, HAN Jitian, YOU Huailiang. Performance of combined cooling, heating and power system based on SOFC/GT/TCO₂ integrated power cycle and LiBr-water absorption chiller[J]. CIESC Journal, 2018, 69(S2): 341-349.

参考文献 22

[1]	ZHANG S Q, LIU H L, LIU M L, et al.An efficient integration strategy for a SOFC-GT-SORC combined system with performance simulation and parametric optimization[J].Applied Thermal Engineering, 2017, 121:314-324.
[2]	SANAYE S, KATEBI A.4E analysis and multi objective optimiza-tion of a micro gas turbine and solid oxide fuel cell hybrid combined heat and power system[J].Journal of Power Sources, 2014, 247(2):294-306.
[3]	ISHAK F, DINCER I, ZAMFIRESCU C.Energy and exergy analyses of direct ammonia solid oxide fuel cell integrated with gas turbine power cycle[J].Journal of Power Sources, 2012, 212(9):73-85.
[4]	TSE L K C, WILKINS S, MCGLASHAN N, et al.Solid oxide fuel cell/gas turbine trigeneration system for marine applications[J].Journal of Power Sources, 2011, 196(6):3149-3162.
[5]	MA S L, WANG J F, YAN Z Q, et al.Thermodynamic analysis of a new combined cooling, heat and power system driven by solid oxide fuel cell based on ammonia-water mixture[J].Journal of Power Sources, 2011, 196(20):8463-8471.
[6]	YU Z T, HAN J T, CAO X Q, et al.Analysis of total energy system based on solid oxide fuel cell for combined cooling and power applications[J].International Journal of Hydrogen Energy, 2010, 35(7):2703-2707.
[7]	SHIRAZI A, AMINYAVARI M, NAJAFI B, et al.Thermal-economic-environmental analysis and multi-objective optimization of an internal-reforming solid oxide fuel cell-gas turbine hybrid system[J].International Journal of Hydrogen Energy, 2012, 37(24):19111-19124.
[8]	YAMAGUCHI H, ZHANG X R, FUJIMA K, et al.Solar energy powered Rankine cycle using supercritical CO2[J].Applied Thermal Engineering, 2006, 26(17):2345-2354.
[9]	SÁNCHEZ D, DE ESCALONA J M M, CHACARTEGUI R, et al.A comparison between molten carbonate fuel cells based hybrid systems using air and supercritical carbon dioxide Brayton cycles with state of the art technology[J].Journal of Power Sources, 2011, 196(9):4347-4354.
[10]	MENG Q S, HAN J T, KONG L J, et al.Thermodynamic analysis of combined power generation system based on SOFC/GT and transcritical carbon dioxide cycle[J].International Journal of Hydrogen Energy, 2016, 42(7):4673-4678.
[11]	IBRAHIM N I, AL-SULAIMAN F A, ANI F N.Performance characteristics of a solar driven lithium bromide-water absorption chiller integrated with absorption energy storage[J].Energy Conversion and Management, 2017, 150:188-200.
[12]	PALACIOS-BERECHE R, GONZALES R, NEBRA S A.Exergy calculation of lithium bromide-water solution and its application in the exergetic evaluation of absorption refrigeration systems LiBr-H2O[J].International Journal of Energy Research, 2012, 36(2):166-181.
[13]	WANG X, CHUA H T.Absorption cooling:a review of lithium bromide-water chiller technologies[J].Recent Patents on Mechanical Engineering, 2009, 2(3):193-213.
[14]	SÁNCHEZ D, CHACARTEGUIA R, SÁNCHEZA O.Thermal and electrochemical model of internal reforming solid oxide fuel cells with tubular geometry[J].Journal of Power Sources, 2006, 160(2):1074-1087.
[15]	CHAN S H, KHOR K A, XIA Z T.A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness[J].Journal of Power Sources, 2001, 93(1):130-140.
[16]	岳秀艳,韩吉田,于泽庭,等.设置富氨蒸气回热器的固体氧化物燃料电池/燃气轮机/卡琳娜联合循环系统的热力性能分析[J].中国电机工程学报, 2014, 34(26):4483-4492.YUE X Y, HAN J T, YU Z T, et al.Thermodynamic analysis of SOFC/GT/KCS integrated power generation system with reheater of concentrated ammonia vapor[J].Proceedings of the CSEE, 2014, 34(26):4483-4492.
[17]	AKKAYA A V.Electrochemical model for performance analysis of a tubular SOFC[J].International Journal of Energy Research, 2007, 31(1):79-98.
[18]	CHAN S H, HO H K, TIAN Y.Multi-level modeling of SOFC -gas turbine hybrid system[J].International Journal of Hydrogen Energy, 2003, 28(8):889-900.
[19]	CALISE F, PALOMBO A, VANOLI L.Design and partial load exergy analysis of hybrid SOFC -GT power plant[J].Journal of Power Sources, 2006, 158(1):225-244.
[20]	CHAN S H, LOW C F, DING O L.Energy and exergy analysis of simple solid-oxide fuel-cell power systems[J].Journal of Power Sources, 2002, 103(2):188-200.
[21]	NJODZEFON J C, KLOTZ D, KROMP A, et al.Electrochemical modeling of the current-voltage characteristics of an SOFC in fuel cell and electrolyzer operation modes[J].Journal of the Electrochemical Society, 2013, 160(4):F313-F323.
[22]	CHAN S H, HO H K, TIAN Y.Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant[J].Journal of Power Sources, 2002, 109(1):111-120.

基于SOFC/GT/TCO₂复合动力循环和溴化锂制冷机的冷热电联供系统性能

Performance of combined cooling, heating and power system based on SOFC/GT/TCO₂ integrated power cycle and LiBr-water absorption chiller

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 22

相关文章 15

编辑推荐

Metrics

本文评价

[1]	袁金斗, 王彦博, 胡涵, 余雄江, 徐进良. 微小通道内不同润湿性表面流动冷凝传热[J]. 化工学报, 2018, 69(10): 4156-4166.
[2]	王建, 郭航, 叶芳, 马重芳. 相变材料对车用动力电池组内温度分布影响数值模拟[J]. 化工学报, 2018, 69(4): 1611-1619.
[3]	刘昌泉, 尚炜, 赵举贵, 纪献兵, 吴新明, 徐进良. 纳米修饰吸液芯超薄平板热管的传热特性[J]. 化工学报, 2017, 68(12): 4508-4516.
[4]	张弘喆, 贾先剑, 郭航, 郭青, 闫小克, 叶芳, 马重芳. 冷却水参数对钠钾合金热管传热性能影响[J]. 化工学报, 2017, 68(S1): 105-110.
[5]	张劲草, 辛公明, 陈岩, 程林, 季万祥. 蒸发段和冷凝段变化对重力热管性能的影响[J]. 化工学报, 2017, 68(4): 1343-1348.
[6]	段未, 马国远, 周峰. 泵驱动回路热管能量回收装置性能的影响因素[J]. 化工学报, 2016, 67(10): 4146-4152.
[7]	王伟, 夏国栋, 马丹丹, 程岳. 重力径向偏心热管的温度特性[J]. 化工学报, 2016, 67(9): 3651-3657.
[8]	蔡骥驰, 王瑞祥, 徐荣吉, 张一灏, 丁思源. SDBS对铜-水脉动热管启动及传热性能影响[J]. 化工学报, 2016, 67(5): 1852-1857.
[9]	朱震, 王银峰, 熊国辉, 范红途, 朱跃钊. 新型水平环路热虹吸管启动性能[J]. 化工学报, 2016, 67(5): 1755-1761.
[10]	张发勇, 刘金平, 许雄文. 制冷工况下降膜冷凝器的制冷剂积存特性与传热性能[J]. 化工学报, 2015, 66(12): 5012-5021.
[11]	沈妍, 张红, 许辉, 于萍. 三角沟槽高温热管变热流传热特性[J]. 化工学报, 2014, 65(10): 3829-3837.
[12]	陈强, 黄永华. 热管吸液芯微细孔槽中的蒸发液面特性[J]. 化工学报, 2014, 65(S1): 1-4.
[13]	张朋磊, 王宝龙, 韩林俊, 石文星, 李先庭. 两相热虹吸循环蒸发侧传热模型比较[J]. 化工学报, 2013, 64(8): 2752-2759.
[14]	郑丽, 李菊香, 朱珉. 泡沫金属吸液芯热管的传热性能[J]. 化工学报, 2012, 63(12): 3861-3866.
[15]	焦永刚, 夏国栋, 王丹, 王伟, 黄素格. 一种高等温两相闭式热虹吸管的瞬态特性[J]. 化工学报, 2012, 63(11): 3446-3452.