烧结配料过程焦粉最低配比计算方法

doi:10.3969/j.issn.0438-1157.2012.09.003

化工学报 ›› 2012, Vol. 63 ›› Issue (9): 2688-2696.DOI: 10.3969/j.issn.0438-1157.2012.09.003

烧结配料过程焦粉最低配比计算方法

马俊杰^1,2, 吴敏^1,2, 李勇^1,2

1. 中南大学信息科学与工程学院, 湖南长沙 410083;
2. 先进控制与智能自动化湖南省工程实验室, 湖南长沙 410083

收稿日期:2012-06-14 修回日期:2012-06-21 出版日期:2012-09-05 发布日期:2012-09-05
通讯作者: 吴敏
作者简介:马俊杰(1989-),男,硕士研究生。
基金资助:
国家高技术研究发展计划项目(2012AA040307)。

Minimal coke consumption calculating method

MA Junjie^1,2, WU Min^1,2, LI Yong^1,2

1. School of Information Science & Engineering, Central South University, Changsha 410083, Hunan, China;
2. Hunan Engineering Laboratory for Advanced Control and Intelligent Automation, Changsha 410083, Hunan, China

Received:2012-06-14 Revised:2012-06-21 Online:2012-09-05 Published:2012-09-05
Supported by:
supported by the High-tech Research and Development Program of China(2012AA040307).

摘要/Abstract

摘要： 提出了一种烧结过程焦粉最低配比计算方法。首先针对不同烧结终点位置、料层厚度的料层等温线数据建立烧结料层侧面温度场BP神经网络(back propagation neural network,BPNN)模型;然后采用最小二乘支持向量机(least squares support vector machine,LS-SVM)算法建立烧结终点位置、料层厚度等烧结过程状态变量与料层蓄热所需能量之间的关系模型;通过对烧结过程中主要物理、化学反应的分析,计算得到了水分蒸发与碳酸盐分解过程需要热量;最后通过对碳转换形式进行分析,计算得到烧结配料过程焦粉最低配比。仿真实验和工业实际数值算例表明,提出的焦粉最低配比计算方法能有效地反映实际生产所需的最低焦粉配比,从而为烧结过程节能减排提供重要的数值依据。

关键词: 烧结配料, 焦粉配比, 温度场, BP神经网络, 最小二乘支持向量机

Abstract: In actual sintering process,ratios of coal are widely determined by experience.Meanwhile,the consumption models of coal built from many sintering experiments and statistics are too complicated to apply in sintering process.This paper proposed a minimal coke consumption calculating method.Firstly,a BPNN temperature field model of different BTP(burning through point)and thickness is worked out according to isotherm data from actual sintering process.Secondly,the samples of the relationship between BTP,thickness and energy consumption for temperature rising are found and LS-SVM algorithm is applied to build the model due to these characteristics.The energy consumptions of carbonate decomposition and water evaporation are calculated by analyses of physical and chemical changes.Finally,the minimal coke consumption is worked out by coke combustion release process analysis.The simulation and actual sintering data show that the result of this paper reflects the actual need of minimal coke consumption in sintering process and this calculating method can guide the actual production process.

Key words: sintering burden, coke consumption, temperature field, BPNN, LS-SVM

中图分类号:

TF046

马俊杰, 吴敏, 李勇. 烧结配料过程焦粉最低配比计算方法[J]. 化工学报, 2012, 63(9): 2688-2696.

MA Junjie, WU Min, LI Yong. Minimal coke consumption calculating method[J]. CIESC Journal, 2012, 63(9): 2688-2696.

参考文献 15

[1]	Loutzenhiser P G,Gálvez M E,Hischier I.CO2 splitting via two-step solar thermochemical cycles with Zn/ZnO and FeO/Fe3O4 redox reactions(Ⅱ):Kinetic analysis [J].Energy&Fuels,2009,23:2832-2839
[2]	Wu Xiaofeng(吴晓峰).Study on construction method of three dimension temperature trend map in sintering process based on plant-tail section infrared characteristic [J].Metallurgical Industry Automation(冶金自动化),2007,31(2):14-18
[3]	Shen Xianfeng(沈显峰),Yao Jin(姚进),Wang Yang(王洋).Finite element simulation for temperature evolution in direct metal laser sintering based on material properties transformation with load steps [J].Chinese Journal of Mechanical Engineering(机械工程学报),2006,62(8):78-83
[4]	Zhang Zongwang(张宗旺),Zhou Fan(周凡),Li Qingyang(李庆洋).Study on carbon regulation technology based on stabilizing sintering burn through point [J].Sintering and Pelletizing(烧结球团),2010,35:29-32
[5]	Hu Changqing(胡长庆),Zhang Yuzhu(张玉柱),Zhang Chunxia(张春霞).Material and energy flow analysis of sintering process [J].Sintering and Pelletizing(烧结球团),2007,32:16-21
[6]	Li W X,Zeng R,Zhang Y.Evolution of electromagnetic properties and microstructure with sintering temperature for MgB2/Fe wires made by combined in-situ/ex-situ process [J].IEEE Transactions on Applied Superconductivity,2011,21:2635-2638
[7]	Harada K,Fuji Y,Takeuchi S.Measurement of the temperature distribution of a sintering process by magnetometer [J].IEEE Transactions on Magnetics,1984,20:1726-1728
[8]	Zhao C Y,Zhang R S.Diagnosing anorexia based on partial least squares,back propagation neural network,and support vector machines [J].Journal of Chemical Information and Computer Science,2004,44:2040-2046
[9]	Zhao Xiaodong(赵晓东),Xu Shenglin(徐生林),Yang Chengzhong(杨成忠).Multi variable neural network predictive model for BOF steelmaking [J].CIESC Journal(化工学报),2010,61(8):2111-2115
[10]	Zhao B T,Zhang Z X.Prediction of coal ash fusion temperature by least-squares support vector machine model [J].Energy Fuels,2010,24:3066-3071
[11]	Adankon M M,Cheriet M,Biem A.Semisupervised learning using bayesian interpretation:application to LS-SVM [J].IEEE Transactions on Neural Networks,2011,22:513-524
[12]	Li Lijuan(李丽娟),Liu Jun(刘君).Multi-modeling of aromatics isomerization process[J].CIESC Journal(化工学报),2011,62(8):2350-2354
[13]	Zhang Chunxia(张春霞),Shangguan Fangqin(上官方钦),Hu Changqing(胡长庆).Steel process structure and its impact on CO2 emission [J].Iron and Steel(钢铁),2010,45(5):1-6
[14]	Zhu Deqing(朱德庆),Pan Jian(潘建),He Aoping(何奥平).Rule of greenhouse gas CO/em>x emission in iron ore sintering process [J].Iron and Steel(钢铁),2006,41(2):76-80
[15]	Li Yong(李勇),Wu Min(吴敏),Cao Weihua(曹卫华).Intelligent integrated model with cascade structure for sinter quality prediction [J].Chinese Journal of Scientific Instrument(仪器仪表学报),2011,32(8):1742-1750

烧结配料过程焦粉最低配比计算方法

Minimal coke consumption calculating method

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 15

相关文章 15

编辑推荐

Metrics

本文评价

[1]	颜建国, 郑书闽, 郭鹏程, 张博, 毛振凯. 基于GA-BP神经网络的超临界CO₂传热特性预测研究[J]. 化工学报, 2021, 72(9): 4649-4657.
[2]	李炜, 王晓明, 蒋栋年, 李亚洁, 梁成龙. 基于SHPSO-GA-BP的成品汽油调和中加氢汽油组分辛烷值的预测[J]. 化工学报, 2020, 71(7): 3191-3200.
[3]	穆瑞, 乐高杨, 杨慧中. 基于O₃/UV法在线COD检测的气体溶解量估计方法[J]. 化工学报, 2019, 70(2): 730-735.
[4]	朱建勇, 张旭乾, 杨辉, 陆荣秀. 单光照条件变化的镨/钕元素组分含量软测量[J]. 化工学报, 2019, 70(2): 780-788.
[5]	王建, 郭航, 叶芳, 马重芳. 相变材料对车用动力电池组内温度分布影响数值模拟[J]. 化工学报, 2018, 69(4): 1611-1619.
[6]	牛大鹏, 刘元清. 基于改进即时学习算法的湿法冶金浸出过程建模[J]. 化工学报, 2017, 68(7): 2873-2879.
[7]	赵敏华, 胡毅, 李金, 王羽笙, 吴蕊, 宋乐. 使用博弈差分算法的电站锅炉高效低污染燃烧均衡优化[J]. 化工学报, 2017, 68(6): 2455-2464.
[8]	王建, 郭航, 叶芳, 马重芳. 热管散热装置对车用锂离子电池组内温度分布影响数值模拟[J]. 化工学报, 2016, 67(S2): 340-347.
[9]	赵朋程, 刘彬, 高伟, 赵志彪, 王美琪. 用于水泥熟料fCaO预测的多核最小二乘支持向量机模型[J]. 化工学报, 2016, 67(6): 2480-2487.
[10]	刘瑞兰, 徐艳, 戎舟. 基于稀疏最小二乘支持向量机的软测量建模[J]. 化工学报, 2015, 66(4): 1402-1406.
[11]	冯凯, 卢建刚, 陈金水. 基于最小二乘支持向量机的MIMO线性参数变化模型辨识及预测控制[J]. 化工学报, 2015, 66(1): 197-205.
[12]	王栋, 陶乐仁, 刘训海. 加湿量对低温冷库冷风机融霜的影响[J]. 化工学报, 2014, 65(z2): 58-63.
[13]	刘小英, 朱恂, 廖强, 王宏. 高温熔融高炉渣颗粒相变冷却特性分析[J]. 化工学报, 2014, 65(S1): 285-291.
[14]	邱勇军, 朱恂, 王宏, 廖强. 熔渣颗粒空冷相变换热的三维数值模拟[J]. 化工学报, 2014, 65(S1): 340-345.
[15]	李永, 茅靳丰, 耿世彬, 张华, 韩旭. 基于动态负荷的地埋管管群换热模型对比分析[J]. 化工学报, 2014, 65(3): 890-897.