基于联立法的乙烯淤浆聚合牌号切换过程动态模拟

doi:10.3969/j.issn.0438-1157.2012.09.005

化工学报 ›› 2012, Vol. 63 ›› Issue (9): 2703-2709.DOI: 10.3969/j.issn.0438-1157.2012.09.005

基于联立法的乙烯淤浆聚合牌号切换过程动态模拟

刘蒙蒙¹, 占志良¹, 邵之江¹, 陈曦¹, 顾雪萍²

1. 工业控制技术国家重点实验室, 浙江大学控制科学与工程系, 浙江杭州 310027;
2. 化学工程联合国家重点实验室, 浙江大学化学工程与生物工程学系, 浙江杭州 310027

收稿日期:2012-06-15 修回日期:2012-06-22 出版日期:2012-09-05 发布日期:2012-09-05
通讯作者: 顾雪萍
作者简介:刘蒙蒙(1989-),女,硕士研究生。
基金资助:
国家重点基础研究发展计划项目(2012CB720503);国家自然科学基金项目(61074148);国家高技术研究发展计划项目(2012AA040305);中央高校基本科研业务费专项资金。

Dynamic simulation of grade transition for ethylene slurry polymerization process based on simultaneous approach

LIU Mengmeng¹, ZHAN Zhiliang¹, SHAO Zhijiang¹, CHEN Xi¹, GU Xueping²

1. State Key Laboratory of Industrial Control Technology, Department of Control Science and Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China;
2. State Key Laboratory of Chemical Engineering, Department of Chemical and Biochemical Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China

Received:2012-06-15 Revised:2012-06-22 Online:2012-09-05 Published:2012-09-05
Supported by:
supported by the National Basic Research Program of China(2012CB720503),the National Natural Science Foundation of China(61074148),the High-tech Research and Development Program of China(2012AA040305)and the Fundamental Research Funds for the Central Universities.

摘要/Abstract

摘要： 以乙烯淤浆聚合流程为研究对象,建立了包含动力学和热力学的动态机理模型,采用有限元正交配置法对控制变量和状态变量同步离散化,实现了全联立动态模拟。热力学物性计算采用Kriging函数估计,可适用于多个工况,最大误差不超过2%。利用Aspen Plus 5个牌号工况的数据,进行了模型稳态验证,并实现了牌号切换动态模拟,计算了平均分子量等质量指标,与Aspen Dynamic曲线吻合较好,为牌号切换的优化奠定了基础。

关键词: 乙烯淤浆聚合, 联立法, 牌号切换

Abstract: Dynamic rigorous model including kinetics and thermodynamics is established for the ethylene slurry polymerization plant.Thermodynamic properties are estimated by Kriging technique with the maximum relative error less than 2%.Based on the equation oriented model,control and state variables are synchronously discretized using orthogonal collocation finite elements(OCFE) method to develop simultaneous dynamic simulation for grade transition operations.The results are validated by comparing steady state data of five different grades obtained by Aspen Plus.The dynamic grade transition based on average molecular weight is also presented,which is close to that in Aspen Dynamic.

Key words: ethylene slurry polymerization, simultaneous approach, grade transition

中图分类号:

TQ325

刘蒙蒙, 占志良, 邵之江, 陈曦, 顾雪萍. 基于联立法的乙烯淤浆聚合牌号切换过程动态模拟[J]. 化工学报, 2012, 63(9): 2703-2709.

LIU Mengmeng, ZHAN Zhiliang, SHAO Zhijiang, CHEN Xi, GU Xueping. Dynamic simulation of grade transition for ethylene slurry polymerization process based on simultaneous approach[J]. CIESC Journal, 2012, 63(9): 2703-2709.

参考文献 15

[1]	Gu Xueping(顾雪萍),Feng Lianfang(冯连芳),Wang Jiajun(王嘉俊),Tang Zhiwu( 汤志武).Simulation for grade transition of ethylene slurry polymerization process[J].Sciencepaper Online(中国科技论文在线),2008,12(3):915-918
[2]	Biegler L T,Cervantes A M,W#228;chter A.Advances in simultaneous strategies for dynamic process optimization[J].Chemical Engineering Science,2002,57(4):575-593
[3]	Shen Hang(沈航).Modeling of slurry polyethylene processes using Aspen Plus.Hangzhou:Zhejiang University,2006
[4]	Soares J B P,Hamielec A E.General dynamic mathematical-modeling of heterogeneous Ziegler-Natta and metallocene catalyzed copolymerization with multiple-site types and mass and heat-transfer resistances[J].Polymer Reaction Engineering,1995,3(3):261-324
[5]	Lophaven S N,Nielsen H B,Søndergaard J.DACE:a matlab Kriging toolbox:Report of Informatics and Mathematical Modelling.2002
[6]	Yang Youqi(杨友麒),Xiang Shuguang(项曙光).Simulation and Optimization of Chemical Processes(化工过程模拟与优化)[M].Beijing:Chemical Industry Press,2006
[7]	Soares J B P.Mathematical modelling of the microstructure of polyolefins made by coordination polymerization:a review[J].Chemical Engineering Science,2001,56(3):4131-4153
[8]	Feng Lianfang(冯连芳).Modeling of catalytic propylene polymerization reactor and process.Hangzhou:Zhejiang University,2006
[9]	Zhan Zhiliang(占志良).Simulation and optimization of an industrial HDPE slurry process based on equation oriented models.Hangzhou:Zhejiang University,2012
[10]	Zheng Jinhua(郑金华),Luo Biao(罗彪).A latin hypercube sampling based multi-objective evolutionary algorithm [J].Pattern Recognition and Artificial Intelligence(模式识别与人工智能),2009,22(2):223-233
[11]	Gu Xueping(顾雪萍),Wang Jiajun(王嘉骏),Shen Hang( 沈航),Feng Lianfang(冯连芳).Physical properties computation of pure components for ethylene slurry polymerization system [J].Journal of Chemical Engineering of Chinese Universities(高校化学工程学报),2007,21(5):729-733
[12]	Gross J,Sadowski G,Perturbed-chain SAFT:an equation of state based on a perturbation theory for chain molecules[J].Industrial & Engineering Chemistry Research,2001,40(4):1244-1260
[13]	Kameswaran S,Biegler L T.Simultaneous dynamic optimization strategies:recent advances and challenges[J].Computers&Chemical Engineering,2006,30(10/11/12):1560
[14]	Chen Yang(陈杨),Shao Zhijiang(邵之江),Qian Jixin(钱积新),Wang Kexin(王可心).Global versus local orthogonal collocation in simultaneous approach[J].CIESC Journal(化工学报),2010,61(2):384-391
[15]	Lorenz T Biegler. Nonlinear Programming:Concepts,Algorithms,and Applications to Chemical Processes[M].MOS-SIAM Series on Optimization,2010

基于联立法的乙烯淤浆聚合牌号切换过程动态模拟

Dynamic simulation of grade transition for ethylene slurry polymerization process based on simultaneous approach

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 15

相关文章 14

编辑推荐

Metrics

本文评价

[1]	郭青, 刘海艳, 陈娟. 基于动态优化和反馈控制的聚合反应过程牌号切换策略[J]. 化工学报, 2015, 66(1): 299-306.
[2]	魏宇杰, 尚超, 高莘青, 范志, 黄德先. 基于动态过程划分的熔融指数软测量建模[J]. 化工学报, 2014, 65(8): 3062-3070.
[3]	奂金龙, 占志良, 陈曦, 邵之江, 姚臻, 顾雪萍, 冯连芳. 乙烯淤浆聚合动态分子量分布模拟计算[J]. 化工学报, 2013, 64(4): 1312-1317.
[4]	刘蒙蒙占志良邵之江陈曦顾雪萍. 基于联立法的乙烯淤浆聚合牌号切换过程动态模拟[J]. CIESC Journal, 2012, 0(0): 0-0.
[5]	费正顺, 胡斌, 叶鲁彬, 郑平友, 梁军. 带路径约束的聚烯烃牌号切换操作优化方法 [J]. 化工学报, 2010, 61(4): 893-900.
[6]	陈杨, 邵之江, 钱积新, 王可心. 联立法中全局和局部正交配置算法 [J]. 化工学报, 2010, 61(2): 384-391.
[7]	何德峰, 邹涛, 俞立. 大型聚丙烯生产装置牌号切换滚动时域控制 [J]. 化工学报, 2010, 61(2): 405-412.
[8]	魏舸裔, 王靖岱, 阳永荣. 基于催化剂颗粒停留时间分布的双峰聚乙烯牌号切换优化 [J]. 化工学报, 2009, 60(11): 2847-2853.
[9]	黄骅, 俞立, 张贵军, 陈秋霞. 改进的差分进化算法及在聚丙烯牌号切换优化中的应用 [J]. 化工学报, 2008, 59(7): 1711-1714.
[10]	荚亮, 梁军, 王文庆, 王靖岱. 聚烯烃连续生产过程中产品牌号切换的研究述评 [J]. CIESC Journal, 2006, 25(7): 780-.
[11]	王平;王靖岱;阳永荣 . 浆液法聚乙烯连续聚合过程中牌号过渡的优化 [J]. CIESC Journal, 2006, 57(11): 2657-2663.
[12]	王芳，林雯，王靖岱，阳永荣. 聚合物质量控制技术研究进展 [J]. CIESC Journal, 2006, 25(1): 14-.
[13]	王靖岱; 陈纪忠; 阳永荣. 连续聚合过程中产品牌号过渡的优化 [J]. CIESC Journal, 2001, 52(4): 295-300.
[14]	邵之江,张余岳,钱积新. 面向方程联立求解的精馏塔模拟与优化一体化算法 [J]. CIESC Journal, 1997, 48(1): 46-51.