Parameter Estimation by Fourier Analysis—Determination of Particle-to-Fluid Heat Transfer Coefficient in Packed Bed

CIESC Journal

• Original Article • 上一篇下一篇

Parameter Estimation by Fourier Analysis—Determination of Particle-to-Fluid Heat Transfer Coefficient in Packed Bed

沈静珠¹; 影井清一郎²; 若尾法昭²

¹ Department of Chemistry and Chemical Engineering, Qinghua University, China

² Faculty of Engineering, Yokohama National University, Japan

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:1983-12-28 发布日期:1983-12-28
通讯作者: 沈静珠

Parameter Estimation by Fourier Analysis—Determination of Particle-to-Fluid Heat Transfer Coefficient in Packed Bed

SHEN Jingzhu¹; S. Kaguei²; N. Wakao²

¹ Department of Chemistry and Chemical Engineering, Qinghua University, China

² Faculty of Engineering, Yokohama National University, Japan

Received:1900-01-01 Revised:1900-01-01 Online:1983-12-28 Published:1983-12-28
Contact: SHEN Jingzhu

摘要/Abstract

摘要： A stimulus-response technique is used to determine particle-to-fluid heat transfer coefficient inpacked bed.The input signal is a one-shot thermal shock of arbitrary shape.Based on the D-C model,aFourier analysis method is applied.The result shows that in the laminar flow regime the Nusselt numberof particle-to-fluid heat transfer does not decrease appreciably with decrease in Reynolds number.

沈静珠, 影井清一郎, 若尾法昭. Parameter Estimation by Fourier Analysis—Determination of Particle-to-Fluid Heat Transfer Coefficient in Packed Bed[J]. CIESC Journal.

SHEN Jingzhu, S. Kaguei, N. Wakao. Parameter Estimation by Fourier Analysis—Determination of Particle-to-Fluid Heat Transfer Coefficient in Packed Bed[J]. .

Parameter Estimation by Fourier Analysis—Determination of Particle-to-Fluid Heat Transfer Coefficient in Packed Bed

Parameter Estimation by Fourier Analysis—Determination of Particle-to-Fluid Heat Transfer Coefficient in Packed Bed

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价