CIESC Journal

• 化工学报 • 上一篇    下一篇

填充床中的速度分布预测

程振民,袁渭康   

  1. 华东化工学院联合化学反应工程研究所,华东化工学院联合化学反应工程研究所 上海200237 ,上海200237
  • 出版日期:1993-10-25 发布日期:1993-10-25

PREDICTION OF VELOCITY DISTRIBUTION IN PACKED BEDS

Cheng Zhenmin and Yuan Weikang ( UNILAB Research Center of Chemical Reaction Engineering, East China University of Chemical Technology, Shanghai 200237)   

  • Online:1993-10-25 Published:1993-10-25

摘要: Smith等早在闪53年就作了填充床中速度什布的实验研究[’],但至今尚未建立关于速 度分布的普遍化关联式。作为填充床基本件质之一的速度分布,对十正确认识床内的传热 传质过程以及建立固定床反应器的模型都具有罩要意义。研究表明1刁,反应器流动模型考 虑了速度分布等因素的径向变化,比用平推流模型能更好地预测实验现象。随着对速度分 布和空隙率等认识的深入,反应器流动模型越来越真实。Stephenson*报道了他们的激光 测速实验,使实验研究方法趋于成熟,但理论顶测问题仍显得落后。近10年未一直采用 修千的Brinkman方程进行预刎叫,们结果与实验现象的偏羔太大。

Abstract: A physical model called parallel-tube model based on the analogy between fluid flow in a packed bed and in an empty pipe is established and a method for the velocity prediction is pressented. It is found that the prediction is close to the experimental study and is better than those methods developed previously.