CIESC Journal

• 化工学报 • 上一篇    下一篇

环流料封阀水平孔口流动阻力特性

王擎,孙键,骆仲泱,岑可法,倪明江   

  1. 东北电力学院动力系!吉林132012,东北电力学院动力系!吉林132012,浙江大学热能工程研究所!杭州310027,浙江大学热能工程研究所!杭州310027,浙江大学热能工程研究所!杭州310027
  • 出版日期:1999-10-25 发布日期:1999-10-25

FLOW RESISTANCE PROPERTY ACROSS HORIZONTAL ORIFICE OF LOOP SEAL

Wang Qing and Sun Jian( Department of Power Engineering, Northeast Electric Power Institute, Jilin 132012)Luo Zhongyang, Cen Kefa and Ni Mingjiang(Institute for Thermal Power Engineering, Zhejiang University, Hangzhou 310027)   

  • Online:1999-10-25 Published:1999-10-25

PDF (PC)

165

被引次数

25 | 5

摘要： 通过冷态试验详细研究了环流料封阀水平孔口面积对返料特性的影响,获得了不同条件下环流料封阀水平孔口的阻力特性.根据试验结果和理论分析建立了水平孔口压差与通过孔口处的固体流率之间的经验关系式.定义了孔口流量系数新的关系式.这将为环流料封阀的设计与运行提供依据.

Abstract: Based on a cold CFB model, the effect of horizontal orifice areas of Loop Seal on performance was studied in detail. The resistance properties across orifice were obtained under its different operational conditions. An empirical relation between the pressure drop across horizontal orifice and solids circulating flow rate was proposed and a new orifice discharging coefficient was also defined according to the experimental results and theoretical analysis. These will provide a sound basis for the optimum design and operation of Loop Seal.

中图分类号: 

版权所有 © 2019 《化工学报》编辑部
北京市东城区青年湖南街13号（100011）
电话：010-64519489，010-64519362，010-64519485，010-64519490，010-64519451
E-Mail：hgxb@cip.com.cn
京ICP备12046843号-7
京公网安备 11010102001995号
本系统由北京玛格泰克科技发展有限公司设计开发