CIESC Journal

• 研究论文 • 上一篇    下一篇

丁烷氧化制顺酐循环流化床反应系统的温度匹配(Ⅱ)性能模拟、分析与反应温度匹配

刘辉; 黄晓峰; 李成岳; 陈标华   

  1. 北京化工大学教育部可控化学反应科学与技术重点实验室
  • 出版日期:2001-04-25 发布日期:2001-04-25

TEMPERATURE MATCHING FOR CFB REACTOR SYSTEMS FOR SELECTIVE OXIDATION OF N-BUTANE TO MALEIC ANHYDRIDE(Ⅱ) PERFORMANCE SIMULATION,ANALYSIS AND TEMPERATURE MATCHING

LIU Hui;HUANG Xiaofeng;LI Chengyue;CHEN Biaohua   

  • Online:2001-04-25 Published:2001-04-25

摘要: 利用本文 (Ⅰ )报发展的模型和算法对整个CFB系统的性能和不同氧种的历时变化与操作条件的相互关系进行了分析 ,特别是揭示了提高流化床再生器反应温度 ,使两反应器的性能和反应速率更好匹配的显著效果 ,为进一步开发研究指明了方向

Abstract: Based on the models and computation method developed in the part (Ⅰ),this paper analyses the effects of operation conditions on the time dependent variations of different kinds of oxygen and the performance of the CFB reactor system. The simulation and analysis lead to the following conclusions regarding to the performance of the riser-regenerator two bed system for selective oxidation of n-butane to maleic anhydride over the VPO catalyst. The reaction performance in the riser is strongly influenced by gas phase feed compositions and solid phase oxygen loading. It is also demonstrated that an improved selectivity and yield for maleic anhydride can be achieved by elevating regeneration temperature so as to enhance the oxygen uptake rate and to optimize distribution of different types of oxygen sites over the catalysts. At the same time, the solids circulation flux through the system can largely be reduced.