[1] Harvey, P.S., Greaves, M., "Turbulent flow in an agitated vessel. Part Ⅱ: Numerical
solution and model prediction",Trans Ichem E, 60 (2), 201-210 (1982).
[2] Middleton, J.C., Piece, F., Lynch, P.M., "Computations of flow fields and complex
reaction yield in turbulent stirred reactors, and comparison with experimental data",
Chem.Eng. Res. Des., 64 (1), 19-22 (1986).
[3] Hou, S.D., Zhang, Z., Wang, Y.C., Shi, L.T., "Numerical simulation of turbulent flow in
mechanically agitated vessels", The 9 th National Conference on Chemical Engineering,
Qingdao, 588-593 (1998). (in Chinese)
[4] Gotz, S., Sperling, R., Liepe, F., Jembere, S., "Numerical determination of the three-
dimensional velocity distribution in the baffled pitched blade impeller stirred vessel",
Chem.Eng. Technol., 20 (9), 596-605 (1997).
[5] Ranade, V.V., van den Akker, H.E.A., "A computational snapshot of gas-liquid flow in
baffled stirred reactors",Chem. Eng. Sci., 49 (24b), 5175-5192 (1994).
[6] Ranade, V.V., Doment, S.M.S., "Computational snapshot of flow generated by axial
impellers in baffled stirred vessels", Trans. IchemE, 74 (A4), 476-484 (1996).
[7] Brucato, A., Ciofalo, M., Grisafi, F., Micale, G., "Numerical prediction of flow fields
in baffled stirred vessels: A comparison of alternative modeling approaches", Chem.
Eng.Sci., 53 (21), 3653-3684 (1998).
[8] Wang, W.J., Mao, Z.S., "Numerical simulation of the whole field in a stirred fank with
a Rushton turbine using the improved inner-outer iterative procedure", Chinese Journal of
Process Engineering, 2 (3), 193-198 (2002). (in Chinese)
[9] Sun, H.Y., Wang, W.J., Mao, Z.S., "Numerical simulation of the whole three-dimensional
flow in a stirred tank with anisotropic algebraic stress model", Chinese J. Chem. Eng.,
[10] (1), 15-24 (2002).10.Grienberger, J., Hofmann, H., "Investigations and modeling of
bubble columns", Chem. Eng. Sci., 47 (9-11),2215-2220 (1992).
[11] Lin, W.C., Mao, Z.S., Chen, J.Y., "Hydrodynamic studies on loop reactors (Ⅱ) Airlift
loop reactors", Chinese J. Chem.Eng., 5 (1), 11-22 (1997).
[12] Morud, K.E., Hjertager, B.H., "LDA measurements and CFD modeling of gas-liquid flow in
a stirred vessel", Chem.Eng. Sci., 51 (2), 233-249 (1996).
[13] Gosman, A.D., Lekakou, C., Politis, S., Issa, R.I., Looney,M.K., "Multidimensional
Modeling of turbulent two-phase flow in stirred vessels", AIChE J., 38 (12), 1946-1956
(1992).
[14] Ishii, M., Thermo-fluid Dynamic Theory of Two-Phase Flows, Eyrolles, Paris (1975).
[15] Ishii, M., Zuber, N., "Drag coefficient and relative velocity in bubbly, droplet or
particulate flows", AIChE J., 25 (5),843-855(1979).
[16] Zhou, L.X., Theory and Numerical Modeling of Turbulent Gas-particle Flows and
Combustion, Science Press and CRC Press, Beijing (1993). (in Chinese)
[17] Launder, B.E., Spalding, D.B., "The numerical computation of turbulent flows", Comput.
Meth. Appl. Mech.Eng., 3, 269-289 (1974).
[18] Hjertager, B.H., Morud, K., "Computational fluid dynamics simulation of bioreactors",
Proc. BioProcess Engineering Meeting in Stockholm, Biotechnology Research Foundation, Lund,
Sweeden, 40-57 (1993).
[19] Gosman, A.D., Ideriah, F.J.K., "Teach T: A general computer program for two-
dimensional, turbulent, recirculating flows", The Lecture in Imperial College, Imperial
College,London (1976).
[20] Hinze, J.O., Turbulence, McGraw-Hill, New York (1959).
[21] Hesketh, R.P., Fraser Russell, T.W., Etchells, A.W., "Bubble size in horizontal
pipelines", AIChE J., 33 (4), 663-667(1987).
[22] Parthasarathy, R., Ahmed, N., "Sauter mean and maximum bubble diameters in aerated
stirred vessels", Chem.Eng. Res. Des., 72 (A4), 565-572 (1994).
[23] Brown, D.E., Pitt, K., "Drop size distribution of stirred non-coalescing liquid-liquid
system", Chem. Eng. Sci., 27(3), 577-583 (1972).
[24] Calabrese, R.V., Chang, T.P.K., Dang, P.T., "Drop breakup in turbulent stirred-tank
contactors. Part I: Effect of dispersed-phase viscosity", AIChE J., 32 (4), 657-666(1986).
[25] Hinze, J.O., "Fundamentals of the hydrodynamic mechanism of splitting in dispersion
process", AIChE J., 1 (3),289-295 (1959).
[26] Patankar, S.V., Numerical Heat Transfer and Fluid Flow,McGraw-Hill, New York, (1980).
[27] Carver, M.B., Salcudean, M., "Three-dimensional numerical modeling of phase
distribution of two-fluid flow in elbows and return bends", Num. Heat Transfer, 10 (3),
229-251 (1986).
[28] Lu, W.M., Ju, S.J., "Local gas holdup, Mean liquid velocity and turbulence in an
aerated stirred tank using hot-film anemometry", Chem. Eng. J., 35 (1), 9-17 (1987).
[29] Bombac, A., Zun, I., Filipic, B., Zumer, M., "Gas-filled cavity structures and local
void fraction distribution in aerated stirred vessel", AIChE J., 43 (11), 2921-2931 (1997).
[30] Nagase, Y., Yasui, H., "Fluid motion and mixing in a gasliquid contactor with turbine
agitators", Chem. Eng. J.,27 (1), 37-47 (1983).
[31] Harvey, A.D., Lee, C.K., Rogers, S.E., "Steady-state modeling and experimental
measurement of a baffled impeller stirred tank", AIChE J., 41 (10), 2177-2186 (1995).
[32] Nienow, A.W., Wisdom, D.J., Middleton, J.C., "The effect of scale and geometry on
flooding, recirculating, and power in gassed stirred vessels", 2nd European Conference on
Mixing, Cambridge, England, F1.1-F1.16 (1977).
|
京公网安备 11010102001995号
