CIESC Journal

• THERMODYNAMICS • 上一篇    下一篇

二元混合物环丁酚和对二甲苯、乙苯在温度范围为303.15—353.15K下的密度、黏度及其相关性质

杨长生; 马沛生; 周清   

  1. Key Laboratory for Green Chemical Technology of State Education Ministry, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2004-08-28 发布日期:2004-08-28
  • 通讯作者: 杨长生

Densities, Viscosities and Related Properties for Binary Mixtures of Sulfolane+p-Xylene, Sulfolane+Ethylbenzene in the Temperature Range from 303.15K to 353.15K

YANG Changsheng; MA Peisheng; ZHOU Qing   

  1. Key Laboratory for Green Chemical Technology of State Education Ministry, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
  • Received:1900-01-01 Revised:1900-01-01 Online:2004-08-28 Published:2004-08-28
  • Contact: YANG Changsheng

摘要: Densities and viscosities of the binary systems of sulfolane+ethylbenzene, sulfolane+p-xylene have been experimentally determined in temperature interval 303.15—353.15 K and at atmospheric pressure for the whole composition range. The excess molar volumes and viscosity deviations were computed. The computed quantities have been fitted to Redlich-Kister equation. Excess molar volumes and viscosity deviation show a systematic change with increasing temperature. Two mixtures exhibit negative excess volumes with a minimum which occurs approximately at χ = 0.5. The effect of the size, shape and interaction of components on excess molar volumes and viscosity deviations is discussed.

关键词: 密度;粘度;二甲苯;硫化工艺;温度;硫化物

Abstract: Densities and viscosities of the binary systems of sulfolane+ethylbenzene, sulfolane+p-xylene have been experimentally determined in temperature interval 303.15—353.15 K and at atmospheric pressure for the whole composition range. The excess molar volumes and viscosity deviations were computed. The computed quantities have been fitted to Redlich-Kister equation. Excess molar volumes and viscosity deviation show a systematic change with increasing temperature. Two mixtures exhibit negative excess volumes with a minimum which occurs approximately at χ = 0.5. The effect of the size, shape and interaction of components on excess molar volumes and viscosity deviations is discussed.

Key words: density, viscosity, excess molar volume, sulfolane