1 Dalla Betta, R., “Catalytic combustion gas turbine sys-tems: The preferred technology for low emissions elec-tric power production and co-generation”, Catal. Today, 35,129—135 (1997). 2 Valentini, M., Groppi, G., Cristiani, C., Levi, M., Tron-coni, E., Foorzatti, P., “The deposition of γ-Al2O3 layers on ceramic and metallic supports for the preparation of structured catalysts”, Catal. Today, 69, 307—314 (2001). 3 Dupont, V., Zhang, S.H., Bentley, R., “Experimental and modeling studies of the catalytic combustion of meth-ane”, Fuel, 81, 799—810 (2002). 4 Moallemi, F., Batley, G., Dupont, V., Foster,T.J., Pourka-shanian, M., Williams, A., “Chemical modelling and measurements of the catalytic combustion of CH4/air mixtures on platinum and palladium catalysts”, Catal. Today, 47, 235—244 (1999). 5 Veser, G., Frauhammer, J., “Modelling steady state and ignition during catalytic methane oxidation in a monolith reactor”, Chem. Eng. Sci., 55, 2271—2286 (2000). 6 Dupont, V., Zhang, S.H., Williams, A., “Experiments and simulations of methane oxidation on a platinum surface”, Chem. Eng. Sci., 56, 2659—2670 (2001). 7 Chou, C.P., Chen, J.Y., Evans, G.H., Winters, W.S., “Numerical studies of methane catalytic combustion in-side a monolith honeycomb reactor using multi-Step surface reactions”, Combus. Sci. Tech., 150, 27—57(2000). 8 Canu, P., “Simulation and interpretation of catalytic combustion experimental data”, Catal. Today, 64, 239—252 (2001). 9 Hayes, R.E., Kolaczkowski, S.T., Li, P.K.C., Awdry, S., “The palladium catalysed oxidation of methane: Reac-tion kinetics and the effect of diffusion barriers”, Chem. Eng. Sci., 56, 4815—4835 (2001). 10 Cominos, V., Gavriilidis, A., “Theoretical investigation of axially non-uniform catalytic monolith for methane combustion”, Chem. Eng. Sci., 56, 3455—3468 (2001). 11 Kolaczkowski, S.T., Serbetcioglu, S., “Development of combustion catalysts for monolith reactors: A considera-tion of transport limitations”, Appl. Catal. A, 138, 199—214 (1996). 12 Hayes, R.E., Kolaczkowski, S.T., “A study of Nusselt and Sherwood numbers in a monolith reactor”, Catal. Today, 47, 295—303 (1999). 13 Cimino, S., Benedetto, A.D., Pirone, R., Russo, G., “Transient behaviour of perovskite-based monolithic re-actors in the catalytic combustion of methane”, Catal. Today, 69, 95—103 (2001). 14 Tischer, S., Correa, C., Deutschmann, O., “Transient three-dimensional simulations of a catalytic combustion monolith using detailed models for heterogeneous and homogenous reactions and transport phenomena”, Catal. Today, 69, 57—62 (2001). 15 Schwiedernoch, R., Tischer, S., Correa, C., Deutschmann, O., “Experimental and nunmercial study on the transient behaviour of partial oxidation of methane in a catalytical monolith”, Chem. Eng. Sci., 58, 633—642 (2003). 16 Bui, P.A., Vlachos, D.G.,Westmoreland, P.R., “Catalyti-cal ignition of methane/oxygen mixtures over platinum surfaces: Comparison of detailed simulations and ex-periments”, Surf. Sci., 385, 1029—1034 (1997). 17 Ramanathan, K., Balakotaiah, V., West, D.H., “Geometry effects on ignition in catalytic monoliths”, AIChE J., 50(7), 1493—1580 (2004). 18 Canu, P., Vecchi, S., “CFD simulation of reactive flows: Catalytic combustion in a monolith”, AIChE J., 48(12), 2921—2935 (2002). 19 Guo, K., Tang, X.H., Zhou, X.M., Chemical Reaction Engineering, Chemical Industry Press, Beijing (2000). (in Chinese) 20 Feng, B.H., Chemical Engineering Handbook, Chemical Industy Press, Beijing (1989). (in Chinese) 21 Lee, J.H., Trimm, D.L., “Catalytic combustion of meth-ane”, Fuel Process. Technol., 42, 339—359 (1995). 22 Xia, G.R., Feng, Q.L., Similarity of Transfer Phenome-non, China Petrochemical Press, Beijing (1997). (in Chi-nese)
|