热致相分离法iPP中空纤维微空膜结构与性能——稀释剂的作用

CIESC Journal

• RESEARCH NOTES • 上一篇下一篇

热致相分离法iPP中空纤维微空膜结构与性能——稀释剂的作用

杨振生^a,b;李凭力^a; 常贺英^a; 王世昌^a

^a School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
^b School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2006-06-28 发布日期:2006-06-28
通讯作者: 杨振生

Effect of Diluent on the Morphology and Performance of IPP Hollow Fiber Microporous Membrane via Thermally Induced Phase
Separation

YANGZhensheng^a,b;LIPingli^a; CHANGHeying^a; WANGShichang^a

^aSchool of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
^b School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China

Received:1900-01-01 Revised:1900-01-01 Online:2006-06-28 Published:2006-06-28
Contact: YANG Zhensheng

摘要/Abstract

摘要： Isotactic polypropylene (iPP) hollow fiber microporous membranes were prepared using thermally induced phase separation (TIPS) method. Di-n-butyl phthalate (DBP), dioctyl phthalate (DOP), and the mixed solvent were used as diluents. The effect of α (DOP mass fraction in diluent) on the morphology and performance of the hollow fiber was investigated. With increasing α, the morphology of the resulting hollow fiber changes from typical cellular structure to mixed structure, and then to typical particulate structure. As a result, the permeability of the hollow fiber increases sharply, and the mechanical properties of the hollow fiber decrease obviously. It is suggested that the morphology and performances of iPP hollow fiber microporous membrane can be controlled via adjusting the compatibility between iPP and diluent.

关键词: thermally induced phase separation;hollow fiber;isotactic polypropylene;membrane;morphology

Abstract: Isotactic polypropylene (iPP) hollow fiber microporous membranes were prepared using thermally induced phase separation (TIPS) method. Di-n-butyl phthalate (DBP), dioctyl phthalate (DOP), and the mixed solvent were used as diluents. The effect of α (DOP mass fraction in diluent) on the morphology and performance of the hollow fiber was investigated. With increasing α, the morphology of the resulting hollow fiber changes from typical cellular structure to mixed structure, and then to typical particulate structure. As a result, the permeability of the hollow fiber increases sharply, and the mechanical properties of the hollow fiber decrease obviously. It is suggested that the morphology and performances of iPP hollow fiber microporous membrane can be controlled via adjusting the compatibility between iPP and diluent.

Key words: thermally induced phase separation, hollow fiber, isotactic polypropylene, membrane, morphology

杨振生,李凭力, 常贺英, 王世昌. 热致相分离法iPP中空纤维微空膜结构与性能——稀释剂的作用[J]. CIESC Journal.

YANGZhensheng,LIPingli, CHANGHeying, WANGShichang. Effect of Diluent on the Morphology and Performance of IPP Hollow Fiber Microporous Membrane via Thermally Induced Phase
Separation
[J]. .

参考文献

1    Lloyd, D.R., Kim, S.S., Kinzer, K.E., “Microporous membrane formation via thermally-induced phase sepa-ration. II. Liquid-liquid phase separation”, J. Membr. Sci., 64, 1—11(1991).
2    Matsuyama, H., Teramoto, M., Kudari, S., “Effect of dilu-ents on membrane formation via thermally induced phase separation”, J. Appl. Polym. Sci., 82, 169—177(2001).
3    Vadalia, H.C., Lee, H.K., Myerson, A.S., Levon, K., “Thermally induced phase separation in ternary crystal-lizable polymer solutions”, J. Membr. Sci., 89, 37—50(1994).
4    Mcguire, K.S., Laxminarayan, A., Lloyd, D.R., “Kinetics of droplet growth in liquid-liquid phase separation of polymer–diluent systems: Experimental results”, Poly-mer, 36, 4951—4960(1995).
5    Hellman, D.J., Greenberg, A.R., Krantz, W.B., “A novel process for membrane fabrication: Thermally assisted evaporative phase separation (TAEPS)”, J. Membr. Sci., 230, 99—109(2004).
6    Yang, Z.S., Chang, H.Y., Li, P.L., Wang, S.C., “Ther-modynamics of thermally induced phase separation of iPP-DBP-DOP ternary solution by pseudo-binary ap-proach”, J. Chem. Ind. Eng. (China), 56(6), 981—988(2005). (in Chinese)
7    Brandrup, J., Immergut, E.H., Grulke, E.A., Polymer Handbook, 4th edition, John Wiley, New York (1999).
8    Matsuyama, H., Okafuji, H., Maki, T., Teramoto, M., Kubota, N., “Preparation of polyethylene hollow fiber membrane via thermally induced phase separation”, J. Membr. Sci., 223, 119—126(2003).
9    Young ,T.H. , Lin, D.J., Gau, J.J., Chuang, W.Y., Cheng, L.P., “Morphology of crystalline Nylon-610 membranes prepared by the immersion-precipitation process: Com-petition between crystallization and liquid-liquid phase separation”, Polymer, 40, 5011—5021(1999).

热致相分离法iPP中空纤维微空膜结构与性能——稀释剂的作用

Effect of Diluent on the Morphology and Performance of IPP Hollow Fiber Microporous Membrane via Thermally Induced Phase
Separation

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价

热致相分离法iPP中空纤维微空膜结构与性能——稀释剂的作用

Effect of Diluent on the Morphology and Performance of IPP Hollow Fiber Microporous Membrane via Thermally Induced Phase Separation

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价

Effect of Diluent on the Morphology and Performance of IPP Hollow Fiber Microporous Membrane via Thermally Induced Phase
Separation