新型多管塔流体力学特性

CIESC Journal

• SEPARATION SCIENCE & ENGINEERING • 上一篇下一篇

新型多管塔流体力学特性

张鹏飞;黄万福; 池红卫; 王树楹

Chemical Engineering Research Center, Tianjin University, Tianjin 300072, China

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2006-08-28 发布日期:2006-08-28
通讯作者: 张鹏飞

Liquid Flow Distribution in a New Type of Multi-tube Column

ZHANGPengfei; HUANGWanfu; CHIHongwei; WANGShuying

Chemical Engineering Research Center, Tianjin University, Tianjin 300072, China

Received:1900-01-01 Revised:1900-01-01 Online:2006-08-28 Published:2006-08-28
Contact: ZHANG Pengfei

摘要/Abstract

摘要： A new type of multi-tube column, in which a novel internal-structure is installed in the bed of random packing, has been invented. The internal-structure reduces the hydraulic radius of the column and adjusts the gas/liquid flow so that the liquid maldistribution is greatly abated. A mathematical model with boundary conditions based on close-open mechanism at the internal-structure was established to study the hydraulic behavior of such a column and experiments were carried out to verify the applicability of the model. Predictions from the model agreed well with experimental results. The optimal ratio of the hydraulic diameter of the new multi-tube column to the packing element diameter is found to be 17.5 to 23.3 by employing the optimization method of nonlinear programming. And this new type of multi-tube column opens a new way for random packing columns to be scaled up for industry.

关键词: multi-tube column;internal-structure;liquid distribution;mathematical model;close-open mechanism;optimization

Abstract: A new type of multi-tube column, in which a novel internal-structure is installed in the bed of random packing, has been invented. The internal-structure reduces the hydraulic radius of the column and adjusts the gas/liquid flow so that the liquid maldistribution is greatly abated. A mathematical model with boundary conditions based on close-open mechanism at the internal-structure was established to study the hydraulic behavior of such a column and experiments were carried out to verify the applicability of the model. Predictions from the model agreed well with experimental results. The optimal ratio of the hydraulic diameter of the new multi-tube column to the packing element diameter is found to be 17.5 to 23.3 by employing the optimization method of nonlinear programming. And this new type of multi-tube column opens a new way for random packing columns to be scaled up for industry.

Key words: multi-tube column, internal-structure, liquid distribution, mathematical model, close-open mechanism, optimization

张鹏飞,黄万福, 池红卫, 王树楹. 新型多管塔流体力学特性[J]. CIESC Journal.

ZHANGPengfei, HUANGWanfu, CHIHongwei, WANGShuying. Liquid Flow Distribution in a New Type of Multi-tube Column[J]. .

参考文献

1    The Sixth Institute of Design of Chemical Industry Bu-reau, “High efficiency packed multi-tube columns”, Chem. Eng., 1(5), 9—40(1972). (in Chinese)
2    The Faculty of Chemical Engineering Machinery of Tianjin University, “Experimental study of high effi-ciency packed multi-tube columns”, Chem. Eng., 1(5), 41—54(1972). (in Chinese)
3    Baertschi, P., Kuhn, W., “Final concentration of heavy water by rectification”, In: Progress in Nuclear En-ergy-Series 4: Technology and Engineering, Pergamon Press, New York, 57—64(1956).
4    Lin, Z.W., “The simulation and study of enhancing separation efficiency of packing column”, M.S. Thesis, Tianjin Univ., Tianjin (1986). (in Chinese)
5    Lan, R.S., “The study of performance under over-flooding condition and new type of construction on high efficiency gauze ring packed columns”, M.S. Thesis, Tianjin Univ, Tianjin (1987). (in Chinese)
6    Wan, J., “A study on a novel internal structure of packed column-‘Quasi-Kuhn type column’”, M.S. Thesis, Tian-jin Univ, Tianjin (1988). (in Chinese)
7    Zhang, P.F., “A study on a new type packed column for close-boiling fractionation”, M.S. Thesis, Tianjin Univ., Tianjin (1989). (in Chinese)
8    Kolar, O., Stanek, V., “Distribution of liquid over ran-dom packing”, Collec. Czechosl. Chem. Commun., 30(4), 1054—1059(1965).
9    Yang, G.,H., “Study of a new high efficiency rectangular helical circle packing and its effect of scale-up”, Chem. Eng., 5, 25—28(1987). (in Chinese)
10    Semkov, K.R., “Liquid flow distribution in packed beds by multipoint liquid distributors”, Chem. Eng. Sci., 46(5/6), 1393—1399(1991).
11    Kouri, R.J., Sohlo, J., “Liquid and gas flow patterns in random and structured packings”, Inst. Chem. Eng. Symp. Ser., 104(B), 193—211(1987).
12    Kouri, R.J., Sohlo, J., “Liquid and gas flow patterns in random packings”, Chem. Eng. J., 61, 95—105(1996).
13    Olujic, Z., Graauw, J., “Appearance of maldistribution in distillation columns equipped with high performance packings”, Chem. Biochem. Eng., 4, 181—196(1989).
14    Stichlmair, J., Stemmer, A., “Influence of maldistribution on mass transfer in packed columns”, Inst. Chem. Eng. Symp. Ser., 104(B), 213—224(1987).
15    Cihla, Z., Schmidt, O., “A study of the flow of liquid when freely trickling over the packing in a cylindrical tower”, Collec. Czechosl. Chem. Commun., 22(3), 896—907(1957).
16    Cihla, Z., Schmidt, O., “Studies of the behaviour of liq-uids when freely trickling over the packing of a cylin-drical tower, Ⅱ”, Collec. Czechosl. Chem. Commun., 23(4), 569—578(1958).
17    Dutkai, E., Ruckenstein, E., “Liquid distribution in packed columns”, Chem. Eng. Sci., 23(11), 1365—1373(1968).

新型多管塔流体力学特性

Liquid Flow Distribution in a New Type of Multi-tube Column

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价