CIESC Journal

• PROCESS AND PRODUCT TECHNOLOGY • 上一篇    下一篇

羟基氧化镍的电解制备,结构表征和电化学性能研究

孙艳芝a; 潘军青b; 万平玉b; 许淳淳a; 刘小光b   

  1. a College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
    b College of Science, Beijing University of Chemical Technology, Beijing 100029, China
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2007-04-28 发布日期:2007-04-28
  • 通讯作者: 孙艳芝

Electrolytic preparation, structure characterization and electrochemical performance of 
NiOOH

SUNYanzhia;PANJunqingb;WANPingyub;XUChunchuna;LIUXiaoguangb   

  1. a College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
    b College of Science, Beijing University of Chemical Technology, Beijing 100029, China
  • Received:1900-01-01 Revised:1900-01-01 Online:2007-04-28 Published:2007-04-28
  • Contact: SUN Yanzhi

摘要: NiOOH was prepared by one-step electrolysis of spherical Ni(OH)2 and the effects of electrolysis parameters were examined. The highly pure NiOOH was obtained after electrolysis at a current density of 60mA•g-1 and 30℃ with anodic potential controlled in the range of 1.73—1.85V (vs. Zn/ZnO) for 360min. The NiOOH samples were characterized by X-ray powder diffraction (XRD) and scanning electron microscope (SEM) analysis. Results indicate that the electrolysis product is spherical NiOOH doped with graphite. Charge and discharge tests show that the prepared NiOOH offers a discharge capacity of over 270mAh•g-1 at current density of 30mA•g-1 and can be directly used as cathode material of alkaline Zn/NiOOH batteries. Galvanostatic charge/discharge and cyclic volt-ammetry (CV) tests reveal good cycling reversibility of the NiOOH electrode.

关键词: NiOOH;electrolysis;current density;discharge capacity;cycling reversibility

Abstract: NiOOH was prepared by one-step electrolysis of spherical Ni(OH)2 and the effects of electrolysis parameters were examined. The highly pure NiOOH was obtained after electrolysis at a current density of 60mA•g-1 and 30℃ with anodic potential controlled in the range of 1.73—1.85V (vs. Zn/ZnO) for 360min. The NiOOH samples were characterized by X-ray powder diffraction (XRD) and scanning electron microscope (SEM) analysis. Results indicate that the electrolysis product is spherical NiOOH doped with graphite. Charge and discharge tests show that the prepared NiOOH offers a discharge capacity of over 270mAh•g-1 at current density of 30mA•g-1 and can be directly used as cathode material of alkaline Zn/NiOOH batteries. Galvanostatic charge/discharge and cyclic volt-ammetry (CV) tests reveal good cycling reversibility of the NiOOH electrode.

Key words: NiOOH, electrolysis, current density, discharge capacity, cycling reversibility