CIESC Journal

• REACTION KINETICS, CATALYSIS AND REACTION ENGINEERING • 上一篇    下一篇

模拟城市垃圾焚烧中硫化合物对重金属Cd迁移分布的影响

张衍国; 李清海; 蒙爱红; 陈勇; 禚玉群; 陈昌和

  

  1. Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Thermal Engineeering De-partment, Tsinghua University, Beijing 100084, China
  • 收稿日期:2007-04-12 修回日期:1900-01-01 出版日期:2007-12-28 发布日期:2007-12-28
  • 通讯作者: 张衍国

Effects of sulfur compounds on Cd partitioning in a simulated municipal solid waste incinerator

ZHANG Yanguo; LI Qinghai; MENG Aihong; CHEN Yong; ZHOU Yuqun; CHEN Changhe   

  1. Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Thermal Engineeering De-partment, Tsinghua University, Beijing 100084, China
  • Received:2007-04-12 Revised:1900-01-01 Online:2007-12-28 Published:2007-12-28
  • Contact: ZHANG Yanguo

摘要: The effect of sulfur compounds (including sulfur, sulfide, sulfite and sulfate), initial concentration of heavy metal and operating conditions on Cd emission in municipal solid waste (MSW) incineration were investigated using a simulated tubular furnace and simulated MSW spiked with Cd. The concentration of Cd was measured by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after digesting the samples including bottom ash, fly ash and flue gas according to related USEPA methods. The results show that S and Na2S tend to increase Cd partitioning in bottom ash, whereas Na2SO3 and Na2SO4 tend to reduce Cd partitioning in bottom ash. The effect of sulfur compounds on Cd partitioning in bottom ash was in the sequence of Na2S>S>Na2SO3>Na2SO4. chemical equilibrium analysis is also performed to determine the effect of sorbents on Cd adsorption. The calculations show that S presents strong affinity for Cd and restrains Cd adsorption by SiO2, whereas when temperature rises to between 830℃ and 1030℃, Cd adsorption efficiency of SiO2 is over 80% and the efficiency of Al2O3 is up to 85%.

关键词: Cd;municipal solid waste;incineration;sulfur;partitioning

Abstract: The effect of sulfur compounds (including sulfur, sulfide, sulfite and sulfate), initial concentration of heavy metal and operating conditions on Cd emission in municipal solid waste (MSW) incineration were investigated using a simulated tubular furnace and simulated MSW spiked with Cd. The concentration of Cd was measured by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after digesting the samples including bottom ash, fly ash and flue gas according to related USEPA methods. The results show that S and Na2S tend to increase Cd partitioning in bottom ash, whereas Na2SO3 and Na2SO4 tend to reduce Cd partitioning in bottom ash. The effect of sulfur compounds on Cd partitioning in bottom ash was in the sequence of Na2S>S>Na2SO3>Na2SO4. chemical equilibrium analysis is also performed to determine the effect of sorbents on Cd adsorption. The calculations show that S presents strong affinity for Cd and restrains Cd adsorption by SiO2, whereas when temperature rises to between 830℃ and 1030℃, Cd adsorption efficiency of SiO2 is over 80% and the efficiency of Al2O3 is up to 85%.

Key words: Cd, municipal solid waste, incineration, sulfur, partitioning