1 Ng,K.L.,Chadwick,D.,Toseland,B.A.,“Kinetics and modeling ofdimethyl ether synthesis from synthesis gas”,Chem.Eng.Sci.,54, 3587-3592(1999). 2 Lu,W.Z.,Teng,L.,Xiao,W.D.,“Simulation and experiment study of dimethyl ether synthesis from syngas in a fluidized-bed reactor”, Chem.Eng.Sci.,59,5455-5464(2004). 3 Bercic,G.,Levec J.,“Catalytic dehydration of methanol to dimethyl ether-Kinetic investigation and reactor simulation”,Ind.Eng.Chem. Res.,32,2478-2484(1993). 4 Xu,M.,Goodman,D.W.,Bhattacharyya,A.,“Catalytic dehydration of methanol to dimethyl ether(DME)over Pd/Cab-O-Sil catalysts”, Appl.Catal.A,149,303-309(1997). 5 Yaripour,F.,Baghaei,F.,Schmidt,I.B.,Perregaard,J.,“Catalytic dehydration of methanol to dimethyl ether(DME)over solid-acid catalysts”,Catal.Commun.,6,147-52(2005). 6 Xu,M.,Lunsford,J.H.,Goodman,W.D.,Bhattacharyya,A.,“Synthesis of dimethyl ether(DME)from methanol over solid-acid catalysts”,Appl.Catal.A,149,289-301(1997). 7 Eliassi,A.,Savadkoohi,L.,Kargari,A.,“Effects of various process parameters on temperature profile of adiabatic fixed-bed reactor for production of dimethyl ether(DME)from methanol”,Chem.Eng. Commun.,194,1495-1502(2007). 8 Voss,B.,Joensen,F.,Hansen,J.B.,“Preparation of fuel grade dimethyl ether”,US Pat.,5908963(1999). 9 Takeguchi,T.,Yanagisawa,K.I.,Inui,T.,Inoue,M.,“Effect of the property of solid acid upon syngas-to-dimethyl ether conversion on the hybrid catalysts composed of Cu-Zn-Ga and solid acids”,Appl. Catal.A,192,201-209(2000). 10 Ramos,F.S.,Duarte de Farias,A.M.,Borges,L.E.P,Monteiro,J.L., Fraga,M.A.,Sousa-Aguiar,E.F.,“Role of dehydration catalyst acid properties on one-step DME synthesis over physical mixtures”, Catal.Today,101,39-44(2005). 11 Jun,K.W.,Lee,H.S.,Roh,H.S.,Park,S.E.,“Highly water-enhanced H-ZSM-5 catalysts for dehydration of methanol to dimethyl ether”, Bull Korean Chem.Soc.,24,106-110(2003). 12 Raoof,F.,Taghizadeh,M.,Eliassi,A.,Yaripour,F.,“Effects of temperature and feed composition on catalytic dehydration of methanol to dimethyl ether over gamma-alumina”,Fuel,87,2967-2971 (2008). 13 Riggs,J.M.,An Introduction to Numerical Methods for Chemical Engineers,Texas Tech University Press,USA(1994). 14 Moradi,G.R.,Ghanei,R.,Yaripour,F.,“Determination of the optimum operating conditions for LPDME from Syngas”,Int.J.Chem. Reactor Eng.,5,A14(2007). |