CIESC Journal

• 材料化学工程与纳米技术 • 上一篇    下一篇

磷石膏基材料在磷矿充填中的应用

刘芳   

  1. 重庆大学材料学院,重庆 400045

  • 出版日期:2009-12-05 发布日期:2009-12-05

Application of phosphogypsum-based material to tailings backfill of phosphorite mine

LIU Fang   

  • Online:2009-12-05 Published:2009-12-05

摘要:

利用磷石膏和磷渣可配制出性能优良的矿山充填料,提高矿山资源的综合利用率,防止山体崩塌开裂,同时综合利用了工业废渣,减轻环境污染。充填料浆体的浓度对工作性和强度有显著影响,适当的料浆浓度既能保证浆体具有足够的自流性能,同时其强度发展也较为理想;磷渣在激发剂的作用下逐步水化硬化,与磷石膏构成一个结晶结构体,其强度随着磷渣掺量的增加而提高。浆体的自流性能可简化充填工艺,降低充填成本。

Abstract:

The high-grade mine tailings backfill made up from phosphogypsum and phosphor slag enhances multipurpose utilization of mineral resources, prevents collapse and cracking of mountain massif, and alleviates environmental pollution by utilization of industrial waste.The concentration of the tailings backfill slurry has a remarkable influence on its workability and strength.With an appropriate concentration, tailings backfill slurry can not only guarantee the self-flowing capability but also ensure its desirable strength development.Phosphor slag gradually hydrates and hardens under the effect of activator.Together with phosphogypsum, phosphor slag develops into a crystal composition whose strength increases with increasing addition of phosphor slag.Slurry’s self-flowing capability can achieve simplification of tailings backfill and reduction of its cost.