CIESC Journal ›› 2010, Vol. 18 ›› Issue (1): 170-174.

• • 上一篇    

Dissolution Characteristics of Hydrophobically Associating Polyacrylamide in Stirred Tanks

周国忠1, 谢明辉1,2, 刘敏3, 吴华晓3, 龙湘犁2, 虞培清1   

  1. 1. Wenzhou Great Wall Mixer Design Institute, Wenzhou 325028, China;
    2. State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China;
    3. Energy Technology&Services-Oilfield Technology Services Company, The China National Offshore Oil Corporation, Tianjing 300452, China
  • 收稿日期:2009-07-29 修回日期:2009-10-28 出版日期:2010-02-28 发布日期:2010-12-30
  • 通讯作者: ZHOU Guozhong, E-mail: zgz@aaar.com.cn
  • 作者简介:
  • 基金资助:

Dissolution Characteristics of Hydrophobically Associating Polyacrylamide in Stirred Tanks

ZHOU Guozhong1, XIE Minghui1,2, LIU Min3, WU Huaxiao3, LONG Xiangli2, YU Peiqing1   

  1. 1. Wenzhou Great Wall Mixer Design Institute, Wenzhou 325028, China;
    2. State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China;
    3. Energy Technology&Services-Oilfield Technology Services Company, The China National Offshore Oil Corporation, Tianjing 300452, China
  • Received:2009-07-29 Revised:2009-10-28 Online:2010-02-28 Published:2010-12-30
  • Supported by:

摘要: Enhanced oil recovery(EOR) by means of polymer flooding is an important technology for the strategic development of offshore oilfields in China.Hydrophobically associating polyacrylamide(HAPAM) has been recently proposed as a new flooding agent.The solubility of HAPAM is low,which is the bottleneck for further improving the oil recovery through polymer flooding in offshore oilfield.Stirred tanks have been used on offshore platforms to enhance HAPAM dissolving.But there is little literature on the study of HAPAM dissolving characteristics in stirred tanks.In this paper,effects of temperature,salinity,stirring speed,impeller type and stirring method on the dissolution of HAPAM are reported.The experimental results manifest that the dissolving rate of HAPAM increases with temperature and stirring speed,but the viscosity of the polymer solution decreases.There is an optimal range of salinity for polymer dissolving.Combining the operation mode of up-pumping with varying stirring speed,hydrofoil impeller can accelerate the dissolution of HAPAM and maintain a high solution viscosity.

关键词: hydrophobically associating polyacrylamide, viscosity, dissolution time, impeller type, stirring method

Abstract: Enhanced oil recovery(EOR) by means of polymer flooding is an important technology for the strategic development of offshore oilfields in China.Hydrophobically associating polyacrylamide(HAPAM) has been recently proposed as a new flooding agent.The solubility of HAPAM is low,which is the bottleneck for further improving the oil recovery through polymer flooding in offshore oilfield.Stirred tanks have been used on offshore platforms to enhance HAPAM dissolving.But there is little literature on the study of HAPAM dissolving characteristics in stirred tanks.In this paper,effects of temperature,salinity,stirring speed,impeller type and stirring method on the dissolution of HAPAM are reported.The experimental results manifest that the dissolving rate of HAPAM increases with temperature and stirring speed,but the viscosity of the polymer solution decreases.There is an optimal range of salinity for polymer dissolving.Combining the operation mode of up-pumping with varying stirring speed,hydrofoil impeller can accelerate the dissolution of HAPAM and maintain a high solution viscosity.

Key words: hydrophobically associating polyacrylamide, viscosity, dissolution time, impeller type, stirring method