ZHENG KeqingZHANG XuejunTIAN XinjianQIU Limin" /> 直接接触式冰浆生成器的单气泡传热特性

CIESC Journal

• 流体力学与传递现象 • 上一篇    下一篇

直接接触式冰浆生成器的单气泡传热特性

郑克晴,张学军,田新建,邱利民   

  1. 浙江大学制冷与低温研究所,浙江 杭州 310027
  • 出版日期:2010-12-30 发布日期:2010-12-30

Heat transfer performance of a single air bubble in direct contact ice slurry generator

ZHENG KeqingZHANG XuejunTIAN XinjianQIU Limin   

  • Online:2010-12-30 Published:2010-12-30

摘要:

冰浆生成器是直接接触法冰浆制取系统的关键设备之一,而体积传热系数作为衡量冰浆生成器性能的重要参数受诸多因素影响。基于单个气泡在连续相中的上升特性,定性分析了各种因素对体积传热系数的影响。实验结果表明:进气温度下降、进气质量流量增加、水柱高度下降、喷嘴直径减小均导致体积传热系数增加。

Abstract:

Ice slurry generator is a key equipment in the direct contact ice slurry making process.As an important assessment parameter of the ice slurry generator performancethe volumetric heat transfer coefficient is greatly affected by many factors.In this paperqualitative analysis of various effects on the volumetric heat transfer coefficient is donebased on the rising characteristics of a single bubble in the continuous phase.The experimental results show that the decrease of the water column heightthe inlet air temperatureand the nozzle diameteras well as the increase of the air mass flow ratewill lead to an increase of the volumetric heat transfer coefficient.