立式循环撞击流反应器中桨叶垂直交错排布条件下的混合性能

CIESC Journal

立式循环撞击流反应器中桨叶垂直交错排布条件下的混合性能

杨侠1，张涛1，梁利云2，吴艳阳1，毛志慧1，郭嘉3

1武汉工程大学机电工程学院，湖北武汉 430073；2中国舰船研究设计中心，湖北武汉 430064；3武汉工程大学绿色化工过程省部共建教育部重点实验室，湖北武汉 430073

出版日期:2011-04-05 发布日期:2011-06-14

Mixing performance of vertical circulation impinging stream reactor with vertically staggered blades

YANG Xia1，ZHANG Tao1，LIANG Liyun2，WU Yanyang1，MAO Zhihui1，GUO Jia3

1School of Mechanical & Electrical Engineering，Wuhan Institute of Technology，Wuhan 430073，Hubei，China；2China Ship Development and Design Center，Wuhan 430064，Hubei，China；3Key Laboratory for Green Chemical Process，Ministry of Education，Wuhan Institute of Technology，Wuhan 430073，Hubei，China

Online:2011-04-05 Published:2011-06-14

摘要/Abstract

摘要：

立式循环撞击流反应器（VCISR）桨叶的倾角及其布置形式，是影响混合性能的重要因素。本文采用数值方法对VCISR桨叶不同角度垂直交错排布条件下的混合性能进行了研究。上下两对桨叶倾角θ均设置为45°，上下两对桨叶错位角分别设置为15°、30°、45°、60°，结果表明：上下两对桨叶错位角在45°时，VCISR特征撞击面上的速度均方根σ最大，达到3.81，混合性能最优；同工况条件下，当错位角为60°时，桨叶旋转能量消耗最小。

Abstract:

In the vertical impinging stream reactor（VCISR），the inclination angles and layout of blades are significant factors affecting its mixing performance. In this paper，numerical methods are used to investigate the overall performance under the condition that blades are in vertically staggered arrangement in the VCISR. The inclination angle of both blades is set as 45° and staggered angles of a pair of upper and lower blades are set as 15°，30°，45°and 60°，respectively. A serial of numerical simulations indicate that when the staggered angle is 45°，the speed root-mean-square（σ）on the characteristic impact surface of VCISR come up to the maximum value 3.81，and the overall performance is the best. Under the same condition，when the staggered angle is 60°，the rotational energy consumption is minimal.

杨侠1，张涛1，梁利云2，吴艳阳1，毛志慧1，郭嘉3. 立式循环撞击流反应器中桨叶垂直交错排布条件下的混合性能 [J]. CIESC Journal.

YANG Xia1，ZHANG Tao1，LIANG Liyun2，WU Yanyang1，MAO Zhihui1，GUO Jia3. Mixing performance of vertical circulation impinging stream reactor with vertically staggered blades[J]. .