回转窑热工状况影响参数的数值模拟

化工学报 ›› 2011, Vol. 62 ›› Issue (1): 47-52.

回转窑热工状况影响参数的数值模拟

陈文仲，王春华，田远航，王立军

1东北大学材料与冶金学院，辽宁沈阳 110004；2辽宁石油化工大学石油天然气工程学院，辽宁抚顺 113001；3沈阳远大企业集团，辽宁沈阳 110023

出版日期:2011-01-05 发布日期:2011-01-05

Numerical simulation on influence factors of thermal working conditions in carbon rotary kilns

CHEN Wenzhong1,WANG Chunhua2,TIAN Yuanhang3,WANG Lijun3

Online:2011-01-05 Published:2011-01-05

摘要/Abstract

摘要：

以某炭素厂φ2.3 m×55 m的回转窑作为研究对象，运用流体模拟软件Fluent 和Matlab 分别对回转窑内气体空间和物料料层内的传热过程进行了模拟，预测了回转窑参数如二、三次供风量和位置、翻料装置、物料填充率、窑转速等对窑内温度场的影响。结果表明合理布置二、三次风供风量和位置、设定翻料装置的尺寸和个数能够有效提高窑内温度，进而提高煅后焦质量；合理增加物料填充率和提高窑转速既能够提高回转窑产能，又能够保证煅后焦质量。

关键词: FONT-SIZE: 10.5pt, mso-bidi-font-size: 11.0pt, mso-ascii-font-family: Times New Roman, mso-bidi-font-family: Times New Roman, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">炭素回转窑；数值模拟；回转窑参数；温度场

Abstract:

Taking a φ2.3 m×55 m carbon rotary kiln for example, numerical simulations were conducted on the gas and solid spaces of the kiln using the Fluent and Matlab softwares.The influences of parameters such as the secondary and tertiary air inlet positions and air flow, turn-down rigs on the kiln lining, filling ratio of solids, rotation speed of the kiln on the kiln temperature were predicted.The results indicate that, if the secondary and tertiary air inlet positions and air flow, or the size and the number of the turn-down rigs are reasonably designed, the kiln temperature will be increased, resulting in the improvement for the quality of the calcined cokes.In addition, properly increasing the filling ratio of solids or rotation speed can increase the kiln output and ensure the quality of the calcined cokes at the same time.

Key words: FONT-SIZE: 10.5pt, mso-bidi-font-size: 11.0pt, mso-ascii-font-family: Times New Roman, mso-bidi-font-family: Times New Roman, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">炭素回转窑；数值模拟；回转窑参数；温度场

陈文仲, 王春华, 田远航, 王立军. 回转窑热工状况影响参数的数值模拟 [J]. 化工学报, 2011, 62(1): 47-52.

CHEN Wenzhong, WANG Chunhua, TIAN Yuanhang, WANG Lijun.

Numerical simulation on influence factors of thermal working conditions in carbon rotary kilns[J]. CIESC Journal, 2011, 62(1): 47-52.

[1]	王建立, 朱建军, 宋辰兴, 张兴. 3ω法测量纳米流体热导率 [J]. 化工学报, 2011, 62(S1): 42-47.
[2]	马维刚, 王海东, 张兴, 王玮. 多晶金薄膜电子-声子耦合的实验研究 [J]. 化工学报, 2011, 62(S1): 48-53.
[3]	崔福庆, 何雅玲, 程泽东, 李东, 陶于兵. 有压腔式吸热器内辐射传播过程的Monte Carlo模拟 [J]. 化工学报, 2011, 62(S1): 60-65.
[4]	何奎, 汪双凤, 黄间珍. 气液两相流在微小T型三通中的相分配特性 [J]. 化工学报, 2011, 62(S1): 92-96.
[5]	刘绩伟, 吴玉庭, 马重芳. 管肋式空间辐射器设计 [J]. 化工学报, 2011, 62(S1): 103-107.
[6]	李旺, 王情愿, 李瑞龙, 李超, 宇波, 张劲军, 代鹏飞. 大型浮顶油罐温度场数值模拟 [J]. 化工学报, 2011, 62(S1): 108-112.
[7]	胡朝发, 贾力. 脉动热管气液塞振荡运动模型 [J]. 化工学报, 2011, 62(S1): 113-117.
[8]	任楠, 王涛, 吴玉庭, 马重芳. 混合碳酸盐的DSC测量与比热容分析 [J]. 化工学报, 2011, 62(S1): 197-202.
[9]	张艾萍, 谢立强, 徐志明. 超声空化对换热器协同场的影响 [J]. 化工学报, 2011, 62(S1): 130-133.
[10]	曾庆, 郭印诚, 牛振祺, 林文漪. 填料塔中氨水吸收二氧化碳的传质性能 [J]. 化工学报, 2011, 62(S1): 146-150.
[11]	褚燕彬, 曹柳林, 王晶. 利用组合B样条神经网络实现对间歇反应过程的动态建模 [J]. 化工学报, 2011, 62(S1): 157-162.
[12]	吴海波, 方岩雄, 纪红兵. 助溶剂促进的β-环糊精与肉桂醛的包结性能 [J]. 化工学报, 2011, 62(S1): 168-173.
[13]	马有福，袁益超，陈昱，刘海磊，康明. 翅片螺距对锯齿螺旋翅片换热管特性的影响 [J]. CIESC Journal, 2011, 62(9): 2484-2489.
[14]	刘戈，解茂昭，贾明. 基于互动小火焰模型的内燃机燃烧过程大涡模拟 [J]. CIESC Journal, 2011, 62(9): 2490-2498.
[15]	刘娇，孟范平，王震宇，刘启元. 亚甲基蓝光度法研究基于CaO₂的Fenton反应条件 [J]. CIESC Journal, 2011, 62(9): 2520-2526.