基于虚拟仪器的活塞发声腔校准系统的设计与实现

doi:10.3969/j.issn.0438-1157.2012.09.040

化工学报 ›› 2012, Vol. 63 ›› Issue (9): 2926-2930.DOI: 10.3969/j.issn.0438-1157.2012.09.040

基于虚拟仪器的活塞发声腔校准系统的设计与实现

秦俊辉¹, 祝海江¹, 何龙标²

1. 北京化工大学信息科学与技术学院, 北京 100029;
2. 中国计量科学研究院力声所, 北京 100013

收稿日期:2012-06-15 修回日期:2012-06-26 出版日期:2012-09-05 发布日期:2012-09-05
通讯作者: 祝海江
作者简介:秦俊辉(1989-),男,硕士研究生。
基金资助:
质检总局量值传递专项(ALC1107)。

Design and implementation of pistonphone calibration system based on virtual instrument

QIN Junhui¹, ZHU Haijiang¹, HE Longbiao²

1. College of Information & Technology, Beijing University of Chemical Technology, Beijing 100029, China;
2. Division of Mechanics and Acoustics, National Institute of Metrology, Beijing 100013, China

Received:2012-06-15 Revised:2012-06-26 Online:2012-09-05 Published:2012-09-05
Supported by:
supported by the Quantity Transfer and Traceability Program of AQSIQ(ALC1107).

摘要/Abstract

摘要： 随着次声校准的需求越来越多,而传统的互易法校准在低频段受气体泄漏影响很大,校准效果不好,新式的激光式活塞发声腔校准法更适用于次声传声器校准。设计并实现了一套基于虚拟仪器的激光式活塞发声腔校准系统,采用超低频振动台技术,其活塞位移失真度很小,腔体中声压级稳定,声压级范围大。校准系统的软件设计灵活方便,加入声压反馈后能得到声压级很稳定的声源。

关键词: 激光式活塞发声器, 虚拟仪器, 次声校准

Abstract: The requirement of infrasound calibration is increasing,but the traditional reciprocity calibration method is easily influenced by gas leakage in low frequency and its calibration result is not good. The new method called laser pistonphone calibration is more suitable for infrasonic microphone calibration.This paper designs a laser pistonphone calibration system based on virtual instrument.The system employs ultra-low frequency technology.The distortion of the piston displacement is very small. The SPL(sound pressure level)in the cavity is stable and large-scale.The software design of the system is flexible and convenient.After sound pressure feedback is introduced,a sound source with stable SPL can be achieved.

Key words: laser pistonphone, virtual instrument, infrasound calibration

中图分类号:

O429

秦俊辉, 祝海江, 何龙标. 基于虚拟仪器的活塞发声腔校准系统的设计与实现[J]. 化工学报, 2012, 63(9): 2926-2930.

QIN Junhui, ZHU Haijiang, HE Longbiao. Design and implementation of pistonphone calibration system based on virtual instrument[J]. CIESC Journal, 2012, 63(9): 2926-2930.

参考文献 9

[1]	Richard Barham,Mike Goldsmith.The application of the NPL laser pistonphone to the international comparison of measurement microphones[J].Metrologia,2007,44:210-216
[2]	Erling Frederiksen.Infrasound calibration of measurement microphones[J].Technical Review of B&K,2008,1:15-28
[3]	Timothy Merrill Marston.Infrasonic pistonphone calibration.Philly:The Pennsylvania State University,2009
[4]	Zhang Mingduo(张明铎).Measurement of the sound pressure level of pistonphone with unknown coupler volume[J].Applied Acoustic(应用声学),2002,21(6):28-35
[5]	Yang Jun(杨军),Li Cheng(李程),Luo Huafeng(罗华峰),Wang Wei(王维).A measurement method of volume based on the principles of pistonphone :CN,102095466A.2010-11-26
[6]	Sadikoglu E,et al.A laser pistonphone based on self-mixing interferometry for the absolute calibration of measurement microphones[J].Applied Acoustics,2004,65:833-840
[7]	Zhang Bingyi(张炳毅),Zeng Wu(曾吾).Mathematical model of a pistonphone used in microphone calibration [J].Metrology and Measurement Technology(计测技术),2009, 29(1):15-17
[8]	Zhang Bingyi(张炳毅),Zeng Wu(曾吾).Study progress of pistonphone used for microphone calibration [J].Metrology and Measurement Technology(计测技术),2007, 27(5):5-7
[9]	He Wen(何闻),Wang Zhipeng(王志鹏),Yu Mei(于梅),Shen Runjie(沈润杰),Ma Mingde(马明德),Jia Shushi(贾叔仕).Fast adjustment method of ultralow frequency vibration table:CN,102230821A.2011-04-11

基于虚拟仪器的活塞发声腔校准系统的设计与实现

Design and implementation of pistonphone calibration system based on virtual instrument

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 9

相关文章 3

编辑推荐

Metrics

本文评价

[1]	邹志云, 常颖, 管臣, 黄越, 冯文强, 赵丹丹. 一种基于以太网通信的新型频谱分析仪及其化工设备监测应用[J]. 化工学报, 2013, 64(12): 4656-4661.
[2]	秦俊辉. 基于VI的活塞发声腔校准系统的设计与实现[J]. CIESC Journal, 2012, 0(0): 0-0.
[3]	韩磊;宋诗哲. 应用EFM技术检测碳钢在海水中的腐蚀行为 [J]. CIESC Journal, 2008, 59(4): 977-981.