前馈神经网络与遗传算法相结合解决曲轴中心缩孔

doi:10.3969/j.issn.0438-1157.2013.10.026

化工学报 ›› 2013, Vol. 64 ›› Issue (10): 3673-3678.DOI: 10.3969/j.issn.0438-1157.2013.10.026

前馈神经网络与遗传算法相结合解决曲轴中心缩孔

王梦寒¹, 杨海¹, 李雁召¹, 周杰¹, 黄强林²,姚小兵²

1. 重庆大学材料科学与工程学院, 重庆 400030;
2. 格力电器(重庆)有限公司, 重庆 400039

收稿日期:2013-03-20 修回日期:2013-06-26 出版日期:2013-10-05 发布日期:2013-10-05
通讯作者: 杨海
作者简介:王梦寒(1975-),女,博士,副教授。
基金资助:
中央高校基本科研业务费资助项目(CDJZR11130003)

Elimination of voids in crankshaft through a hybrid of back propagation neural network and genetic algorithm

WANG Menghan¹, YANG Hai¹, LI Yanzhao¹, ZHOU Jie¹, Huang Qianglin²,YAO Xiaobing²

1. School of Material Science and Engineering, Chongqing University, Chongqing 400030, China;
2. Gree Electric Appliances, Ltd.of Chongqing, Chongqing 400039, China

Received:2013-03-20 Revised:2013-06-26 Online:2013-10-05 Published:2013-10-05
Supported by:
supported by the Fundamental Research Funds for the Central Universities(CDJZR11130003).

摘要/Abstract

关键词: 曲轴, 缩孔, BP神经网络, 遗传算法, 田口方法

Abstract: A method of combining back propagation neural network (BP neural network)and genetic algorithm was proposed to optimize the process parameters and eliminate the voids in crankshaft.Mold temperature,melt temperature,packing pressure and gate size were taken as design variables and sink marks were taken as optimization goal.Computer aided engineering(CAE)simulation was performed based on the Taguchi method.A BP neural network model was developed to obtain the mathematical relationship between optimization goal and design variables,and genetic algorithm was used to optimize the process parameters.The optimal process parameters were mold temperature 80℃,melt temperature 210℃,packing pressure 110 MPa,gate size 1mm.Finally,the voids in the crankshaft could be eliminated by using the optimized process parameters in actual factory production.

Key words: crankshaft, voids, back propagation neural network, genetic algorithm, Taguchi method

中图分类号:

TQ320.66

王梦寒, 杨海, 李雁召, 周杰, 黄强林, 姚小兵. 前馈神经网络与遗传算法相结合解决曲轴中心缩孔[J]. 化工学报, 2013, 64(10): 3673-3678.

WANG Menghan, YANG Hai, LI Yanzhao, ZHOU Jie, Huang Qianglin, YAO Xiaobing. Elimination of voids in crankshaft through a hybrid of back propagation neural network and genetic algorithm[J]. CIESC Journal, 2013, 64(10): 3673-3678.

参考文献 21

[1]	Jay Shoemaker.Moldflow Design Guide[M].Sichuan:Sichuan University Press,2010:174
[2]	Shen Changyu(申长雨),Wang Lixia(王利霞),Zhang Qinxing(张勤星).Process optimization of injection molding by the combining ANN/HGA method[J].Polymer Science and Engineering(高分子材料科学与工程),2005,21(5):23-27
[3]	Zhao Jian(赵健),Zhang Qinxing(张勤星).Warpage optimization and analysis of injection molding [J].Polymer Science and Engineering(高分子材料科学与工程),2010,26(10):167-170
[4]	Ni S J.Preventing sink marks of injection molded parts using cae analysis//Society of Plastics Engineers Technical Papers[C].2000,VOLS Ⅰ-Ⅲ:453-460
[5]	Erzurumlu T,Ozcelik B.Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method[J].Materials and Design,2006,27:853-861
[6]	Shi L H,Gupta M.Moldeling of sink mark formation in cross-rib-reinforced injection-molded parts by localized finite element shrinkage analysis//Society of Plastics Engineers Technical Papers[C].2000,VOLSⅠ-Ⅲ:712-716
[7]	Sadeghi B H M.A BP-neural predictor model for plastic injection molding process[J].Journal of Materials Processing Technology,2000,103(3):411-416
[8]	Chow T T,Zhang G Q,Lin Z,Song C L.Global optimization of absorption chiller system by genetic algorithm and neural network[J].Energy Build,2002,34(1):103-109
[9]	Cheng J,Li Q S.A hybrid artificial neural network method with uniform design for structural optimization[J].Comput.Mech.,2009,44(1):61-71
[10]	Ozcelik B,Erzurumlu T.Comparison of the warpage optimization in the plastic injection molding using ANOVA,neural network model and genetic algorithm[J].Journal of Materials Processing Technology,2006,171(3):437-445
[11]	Shi Huizhuo(时慧焯),Wang Xicheng(王希诚).Warpage optimization of injection molding based on improved BP neural network[J].CIESC Journal(化工学报),2011,62(9):2562-2568
[12]	Shi Feng(史峰),Wang Xiaochuan(王小川).Analysis of 30 Cases of Matlab Neural Network(Matlab神经网络30个案例分析)[M].Beijing:Beihang University Press,2010:21-45
[13]	Wu Jianfeng(吴建锋),He Xiaorong(何小荣),Chen Bingzhen(陈丙珍).Back-propagation neural network model of dynamic system and its application[J].Journal of Chemical Industry and Engineering(China)(化工学报),2000,51(3):378-382
[14]	Kenig S,Ben-David A,Omer M,Sadeh A.Control of properties in injection molding by neural networks[J].Engineering Applications of Artificial Intelligence,2001,14:819-823
[15]	Fei Yin,Hua Jiemao,Lin Hua,Wei Guo,Mao Shengshu. Back propagation neural network modeling for warpage prediction and optimization of plastic products during injection molding[J].Materials and Design,2011,32:1844-1850
[16]	Wang Xiaoping(王小平),Cao Liming(曹立明).Genetic Algorithm:Theory,Application and Software Implementation(遗传算法:理论、应用与软件实现)[M].Xi'an:Xi'an Jiaotong University Press,2002
[17]	Cook D F,Ragsdale C T.Combining a neural network with a genetic algorithm for process parameter optimization[J].Eng.Appl.Artif.Intell.,2000,13(4):391-39
[18]	Zhou J,Kramschuster A.Single and multiobjective optimization for injection molding using numerical simulation with surrogate models and genetic algorithm[J].Int. Polym.Process,2006,21(5):509-520
[19]	Kurtaran H,Erzurumlu T.Efficient warpage optimization of thin shell plastic parts using response surface methodology and genetic algorithm[J].Int. J. Adv. Manuf.Technol.,2006,27(5/6):468-472
[20]	Shen Changyu,Wang Lixia,Li Qian.Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method[J].Journal of Materials Processing Technology,2007,183:412-418
[21]	Du Jianke(杜建科).Prediction on lower flammability limit temperature of organic compounds based on GA-BP neural network[J].CIESC Journal(化工学报),2010,61(12):3067-3071

前馈神经网络与遗传算法相结合解决曲轴中心缩孔

Elimination of voids in crankshaft through a hybrid of back propagation neural network and genetic algorithm

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 21

相关文章 15

编辑推荐

Metrics

本文评价

[1]	郑书闽, 郭鹏程, 颜建国, 王帅, 李文博, 周淇. 微小通道内过冷流动沸腾阻力特性实验及预测研究[J]. 化工学报, 2023, 74(4): 1549-1560.
[2]	林渠成, 廖祖维. 基于分解算法的功热交换网络多目标优化[J]. 化工学报, 2022, 73(11): 5047-5055.
[3]	朱轶林, 张新敬, 徐玉杰, 丁捷, 郭欢, 陈海生. 基于遗传算法-综合计算法的生物质热解气化优化分析[J]. 化工学报, 2021, 72(9): 4910-4920.
[4]	颜建国, 郑书闽, 郭鹏程, 张博, 毛振凯. 基于GA-BP神经网络的超临界CO₂传热特性预测研究[J]. 化工学报, 2021, 72(9): 4649-4657.
[5]	石向成, 赵志坚, 巩金龙. 遗传算法在催化体系的全局结构优化中的应用[J]. 化工学报, 2021, 72(1): 27-41.
[6]	李炜, 王晓明, 蒋栋年, 李亚洁, 梁成龙. 基于SHPSO-GA-BP的成品汽油调和中加氢汽油组分辛烷值的预测[J]. 化工学报, 2020, 71(7): 3191-3200.
[7]	耿志强, 毕帅, 王尊, 朱群雄, 韩永明. 基于改进NSGA-Ⅱ算法的乙烯裂解炉操作优化[J]. 化工学报, 2020, 71(3): 1088-1094.
[8]	宋泽雨, 李国庆, 刘凌轩. 一种新的无模型自适应控制模型参数整定方法[J]. 化工学报, 2019, 70(9): 3430-3440.
[9]	王斯民, 孙利娟, 宋晨, 张早校, 文键. 螺旋扁管折流杆换热器壳侧性能多目标优化研究[J]. 化工学报, 2019, 70(9): 3353-3362.
[10]	杨新, 麻哲瑞, 申赫男, 陈鸿伟. 基于多尺度特征能量-核极限学习机的双循环流化床气流堵塞故障智能诊断[J]. 化工学报, 2019, 70(7): 2616-2625.
[11]	李霏, 杨翠丽, 李文静, 乔俊飞. 基于均匀分布NSGAII算法的污水处理多目标优化控制[J]. 化工学报, 2019, 70(5): 1868-1878.
[12]	徐奇超, 江锦波, 彭旭东, 李纪云, 王玉明. 基于遗传算法的干气密封双向槽统一模型与参数优化[J]. 化工学报, 2019, 70(3): 995-1005.
[13]	范峥, 姬盼盼, 李超, 刘壮, 赵毅刚, 井晓燕. 模糊神经网络-遗传算法优化丙烯酸苄酯合成工艺[J]. 化工学报, 2019, 70(11): 4315-4324.
[14]	李凡, 许锋, 罗雄麟. 分散常规控制系统结构设计的遗传算法求解[J]. 化工学报, 2018, 69(S2): 266-273.
[15]	张雷, 张小刚, 陈华. 基于Gath-Geva算法和核极限学习机的多阶段间歇过程软测量[J]. 化工学报, 2018, 69(6): 2576-2585.