CIESC Journal ›› 2013, Vol. 64 ›› Issue (11): 4046-4053.DOI: 10.3969/j.issn.0438-1157.2013.11.022

• 催化、动力学与反应器 • 上一篇    下一篇

环氧树脂和环氧/环硫树脂与胺的固化反应动力学

刘晓东1, 程珏1, 林欣2, 张军营1,2   

  1. 1. 北京化工大学, 教育部碳纤维及功能高分子教育部重点实验室, 北京 100029;
    2. 北京化工大学常州先进材料研究院, 江苏 常州 213164
  • 收稿日期:2013-03-25 修回日期:2013-05-21 出版日期:2013-11-05 发布日期:2013-11-05
  • 通讯作者: 张军营
  • 作者简介:刘晓东(1982-),女,硕士研究生。
  • 基金资助:
    国家自然科学基金项目(21176017);国家高技术研究发展计划项目(2012AA03A205);江苏省科技支撑项目(BE2010066);常州微电子化学材料公共工业技术平台项目(CZ2010003)。

Curing kinetics of epoxy resins/amine system and epoxy/episulfide resin/amine system

LIU Xiaodong1, CHENG Jue1, LIN Xin2, ZHANG Junying1,2   

  1. 1. Key Laboratory of Carbon Fiber and Function Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029, China;
    2. Changzhou Institute of Advanced Materials, Beijing University of Chemical Technology, Changzhou 213164, Jiangsu, China
  • Received:2013-03-25 Revised:2013-05-21 Online:2013-11-05 Published:2013-11-05
  • Supported by:
    supported by the National Natural Science Foundation of China(21176017)and the High-tech Research and Development Program of China(2012AA03A205).

摘要: 采用非等温DSC法对低黏度体系CY184/IPDA环氧树脂体系及对CY184/ES184/IPDA环氧/环硫树脂体系的固化反应动力学进行了研究。用高级等转化率Vyazovkin积分法求取活化能Ea,通过Málek法确定了固化反应机理函数和动力学参数,得到固化反应动力学方程。结果表明:CY184/IPDA环氧树脂体系的平均活化能为47.04 kJ·mol-1;CY184/ES184/IPDA环氧/环硫树脂体系的活化能为48.97 kJ·mol-1。两种体系的模型拟合曲线与实验得到的DSC曲线吻合得较好,均符合esták-Berggren(m,n)模型。

关键词: 环氧/环硫树脂, 非等温DSC, Vyazovkin法, Málek法

Abstract: The curing kinetics of a low viscosity epoxy resin system CY184/IPDA and an epoxy-episulfide resin system CY184/ES184/IPDA were studied by non-isothermal DSC.An advanced isoconversional method proposed by Vyazovkin was used to solve the activation energy of these resin systems.Based on the Málek method,curing mechanism functions and reaction kinetic parameters were obtained and the curing kinetic equations of these systems were determined.Average activation energy values for CY184/IPDA and CY184/ES184/IPDA epoxy/episulfide resin system were 47.04 kJ·mol-1 and 48.97 kJ·mol-1 respectively.The calculated curves fitted well with experimental DSC curves of these systems which could be described by Šesták-Berggren(m,n)model.

Key words: epoxy/episulfide resins, non-isothermal DSC, Vyzaovkin method, Má, lek method

中图分类号: