初始非饱和多孔物料对冷冻干燥过程的影响

doi:10.3969/j.issn.0438-1157.2013.09.005

化工学报 ›› 2013, Vol. 64 ›› Issue (9): 3110-3116.DOI: 10.3969/j.issn.0438-1157.2013.09.005

初始非饱和多孔物料对冷冻干燥过程的影响

于凯^1,2, 王维², 潘艳秋¹, 王威^1,2, 陈国华³

1. 大连理工大学化工学院, 辽宁大连 116024;
2. 大连民族学院生命科学学院, 辽宁大连 116600;
3. 香港科技大学化学与生物分子工程系, 中国香港

收稿日期:2013-01-28 修回日期:2013-05-07 出版日期:2013-09-05 发布日期:2013-09-05
通讯作者: 王维
作者简介:于凯(1988- ),男,硕士研究生。
基金资助:
国家自然科学基金项目(21076042);香港研资局基金项目(600704);大连民族学院自主科学基金项目(DC12010209)。

Effect of initially unsaturated porous frozen material on freeze-drying

YU Kai^1,2, WANG Wei², PAN Yanqiu¹, WANG Wei^1,2, CHEN Guohua³

1. School of Chemical Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China;
2. College of Life Science, Dalian Nationalities University, Dalian 116600, Liaoning, China;
3. Department of Chemical and Biomolecular Engineering, The Hong Kong University of Science and Technology, Hong Kong, China

Received:2013-01-28 Revised:2013-05-07 Online:2013-09-05 Published:2013-09-05
Supported by:
supported by the National Natural Science Foundation of China(21076042), Hong Kong SAR RGC(600704)and the Independent Science Fund of Dalian Nationalities University(DC12010209).

摘要/Abstract

摘要： 提出了“初始非饱和多孔物料冷冻干燥”的思想,从实验上验证具有一定初始孔隙的非饱和多孔物料对液体物料冷冻干燥过程的强化作用。设计、加工和组装了一套实验室规模的多功能冷冻干燥装置。采用“液氮制作冰激凌法”,将以甘露醇为主要溶质的液体物料制备成具有不同初始孔隙的冷冻物料。对于相同质量和相同湿含量的非饱和冷冻物料,在相同的操作条件下,进行冷冻干燥实验,并与常规冷冻干燥相比较。结果表明,初始非饱和物料对冷冻干燥过程确实具有显著的强化作用。非饱和冷冻物料(初始饱和度0.28)的干燥时间比常规冷冻物料(初始饱和度1.00)能够节省36.4%。初始饱和度越小,干燥时间越短,干燥产品的含水率越低。

关键词: 冷冻干燥, 液体物料, 非饱和, 初始饱和度, 干燥曲线

Abstract: To overcome disadvantages of freeze-drying that is usually lengthy and expensive,a novel idea,freeze-drying of initially unsaturated porous frozen material,was proposed.An experimental investigation was performed to verify the effect of unsaturated frozen materials with a certain initial porosity on freeze-drying of liquid materials.A multifunctional freeze-drying apparatus on the lab scale was designed,made and assembled.Mannitol was selected as the primary solute in the solution.Liquid nitrogen ice-cream making method was used to prepare frozen materials with different initial saturations.Results show that the unsaturated frozen material can enhance the freeze-drying process significantly and the drying time is reduced substantially compared to conventional freeze-drying for the same material quantity and initial moisture content under the same operating conditions.The drying time with the unsaturated material (initial saturation=0.28) was 36.4% shorter than that with the conventional one(initial saturation=1.00).The smaller the initial saturation is,the shorter the drying time is and the lower the moisture content of dried products is.

Key words: freeze-drying, liquid material, unsaturated, initial saturation, drying curve

中图分类号:

于凯, 王维, 潘艳秋, 王威, 陈国华. 初始非饱和多孔物料对冷冻干燥过程的影响[J]. 化工学报, 2013, 64(9): 3110-3116.

YU Kai, WANG Wei, PAN Yanqiu, WANG Wei, CHEN Guohua. Effect of initially unsaturated porous frozen material on freeze-drying[J]. CIESC Journal, 2013, 64(9): 3110-3116.

参考文献 18

[1]	Andrieu J,Hottot A,Vessot S. Freeze-drying of pharmaceuticals in vials:influence of freezing protocol and sample configuration on ice morphology and freeze-dried cake texture[J].Chemical Engineering and Processing,2007,46(7):666-674
[2]	Schwegman J J,Hardwick L M,Akers M J.Practical formulation and process development of freeze-dried products[J].Pharmaceutical Development and Technology,2005,10(2):151-173
[3]	Sadikoglu H,Ozdemir M,Seker M.Freeze-drying of pharmaceutical products:research and development needs[J].Drying Technology,2006,24(7):849-861
[4]	Wang W,Chen G H.Theoretical study on microwave freeze-drying of an aqueous pharmaceutical excipient with the aid of dielectric material[J].Drying Technology,2005,23(9/10/11):2147-2168
[5]	Ratti C.Hot air and freeze-drying of high value foods:a review[J].Journal of Food Engineering,2001,49(4):311-319
[6]	Liapis A I,Pikal M J,Bruttini R.Research and development needs and opportunities in freeze drying[J].Drying Technology,1996,14(6):1265-1300
[7]	Wang W,Chen G H.Freeze drying with dielectric-material-assisted microwave heating[J].AIChE Journal,2007,53(12):3077-3088
[8]	Wang W,Chen G H.Heat and mass transfer model of dielectric-material-assisted microwave freeze-drying of skim milk with hygroscopic effect[J].Chemical Engineering Science,2005,60(23):6542-6550
[9]	Wang Z H,Shi M H.The effects of sublimation-condensation region on heat and mass transfer during microwave freeze drying[J].Journal of Heat Transfer-Transactions of the ASME,1998,120(3):654-660
[10]	Pikal M J,Roy M L,Shah S.Mass and heat transfer in vial freeze-drying of pharmaceuticals:role of the vial[J].Journal of Pharmaceutical Sciences,1984,73(9):1224-1237
[11]	Pikal M J,Shah S,Senior D,Lang J E.Physical chemistry of freeze-drying:measurement of sublimation rates for frozen aqueous solutions by a microbalance technique[J].Journal of Pharmaceutical Sciences,1983,72(6):635-650
[12]	Livesey R G,Rowe T W.A discussion of the effect of chamber pressure on heat and mass transfer in freeze-drying[J].Journal of Parenteral Science and Technology,1987,41(5):169-171
[13]	Wolff E,Gibert H,Rodolphe F.Vacuum freeze-drying kinetics and modeling of a liquid in a vial[J].Chemical Engineering and Processing,1989,25(3):153-158
[14]	Nail S,Gatlin L.Pharmaceutical Dosage Forms[M].New York:Marcel Dekker,1993:163-333
[15]	Wang W,Chen G H,Gao F R.Effect of dielectric material on microwave freeze-drying of skim milk[J].Drying Technology,2005,23(1/2):317-340
[16]	Tang X L,Pikal M J.Design of freeze-drying processes for pharmaceuticals:practical advice[J].Pharmaceutical Research,2004,21(2):191-200
[17]	Pikal M J.Encyclopedia of Pharmaceutical Technology[M].New York:Marcel Dekker,2002:1299-1326
[18]	Wang W,Chen M,Chen G H.Issues in freeze drying of aqueous solutions[J].Chinese Journal of Chemical Engineering,2012,20(3):551-559

初始非饱和多孔物料对冷冻干燥过程的影响

Effect of initially unsaturated porous frozen material on freeze-drying

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 18

相关文章 14

编辑推荐

Metrics

本文评价

[1]	张绍志, 李扬, 徐以洋, 郑幼明, 栾天, 卢衡. 基于红外测温的文物冷冻干燥监测技术[J]. 化工学报, 2020, 71(S1): 245-251.
[2]	张朔, 王维, 李强强, 唐宇佳, 董铁有. 具有预制孔隙的维生素C水溶液微波冷冻干燥[J]. 化工学报, 2019, 70(6): 2129-2138.
[3]	牛利娇, 王维, 潘思麒, 张大为, 陈国华. 具有预制孔隙多孔介质冷冻干燥的多相传递模型[J]. 化工学报, 2017, 68(5): 1833-1844.
[4]	赵延强, 王维, 潘艳秋, 单宇, 于凯, 陈国华. 具有初始孔隙的多孔物料冷冻干燥[J]. 化工学报, 2015, 66(2): 504-511.
[5]	张明宇，王华，高文桂 . 真空冷冻干燥法制备CuO-ZnO-ZrO2甲醇合成催化剂[J]. 化工进展, 2013, 32(06): 1290-1295.
[6]	张绍志1，房圆圆1，陈光明1，卢衡2. 文物冷冻干燥水蒸气扩散系数的测量[J]. 化工学报, 2012, 63(S1): 28-31.
[7]	刘永忠赵雁飞陈三强孙皓. 冷冻干燥过程相迁移和相分布的孔尺度网络模型与模拟 [J]. CIESC Journal, 2007, 58(2): 286-293.
[8]	孙致平;滕元成;张翠英 . 沉淀包覆法合成高活性纳米过渡态Al₂O₃粉 [J]. CIESC Journal, 2006, 57(9): 2245-2251.
[9]	吴宏伟, 陶智, 陈国华, 邓宏武, 徐国强, 丁水汀. 具有电介质核圆柱多孔介质微波冷冻干燥过程的双升华界面模型 [J]. 化工学报, 2004, 55(6): 869-875.
[10]	陈孟林; 程江; 涂伟萍; 杨卓如; 陈焕钦. 径向热质传递对瓶装物料冷冻干燥的影响 [J]. CIESC Journal, 2002, 53(9): 951-956.
[11]	王朝晖,施明恒. 初始饱和度对微波冷冻干燥过程传热传质的影响 [J]. CIESC Journal, 1997, 48(3): 294-299.
[12]	涂伟萍,程江,杨卓如,陈焕钦. 食品冷冻干燥过程的模型及影响因素 [J]. CIESC Journal, 1997, 48(2): 186-192.
[13]	杨卓如,李志云,涂伟萍,程江,陈焕钦. 多孔纤维状物质的冷冻干燥模型 [J]. CIESC Journal, 1996, 47(2): 162-168.
[14]	王朝晖,施明恒. 非饱和含湿多孔介质微波冷冻干燥过程传热传质分析 [J]. CIESC Journal, 1996, 47(2): 131-136.