阻火器性能测试方法试验性研究

doi:10.3969/j.issn.0438-1157.2014.z1.071

化工学报 ›› 2014, Vol. 65 ›› Issue (S1): 441-450.DOI: 10.3969/j.issn.0438-1157.2014.z1.071

阻火器性能测试方法试验性研究

孙少辰^1,2, 毕明树¹, 刘刚², 刘铎²

1. 大连理工大学化工机械学院, 辽宁大连 116024;
2. 沈阳特种设备检验研究院, 辽宁沈阳 110035

收稿日期:2014-01-09 修回日期:2014-02-27 出版日期:2014-05-30 发布日期:2014-05-30
通讯作者: 毕明树
基金资助:
国家质检总局科技项目（2011QK083）。

A pilot study of flame arrester performance test methods

SUN Shaochen^1,2, BI Mingshu¹, LIU Gang², LIU Duo²

1. School of Chemical Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China;
2. Shenyang Institute of Special Equipment Inspection &Research, Shenyang 110035, Liaoning, China

Received:2014-01-09 Revised:2014-02-27 Online:2014-05-30 Published:2014-05-30
Supported by:
supported by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Scientific Project (2011QK083).

摘要/Abstract

摘要： 在现代工业生产过程中，可燃气体的爆炸事故频繁发生，造成大量的人员伤亡和严重的财产损失，因此对于管道内可燃气体燃烧爆炸的抑制研究已逐渐成为安全技术领域的一项重要课题。阻火器是一种用来阻止易燃气体和易燃液体蒸气火焰蔓延的安全装置，近年来已被广泛应用在石油化工、天然气等工业领域。阻火器通常安装在装置的进出口或者管道上，其中的核心部件阻火单元允许介质流通，阻灭火焰。随着现代社会的发展，人们对于安全问题越来越重视，因此，对于阻火器的性能测试就显得必不可少。由于阻火器的相关检测技术在我国开展得较晚，相对国外标准而言，国内标准不仅技术滞后、更新周期长而且体系不完善不配套。因此本文对阻火器性能测试方法进行了研究，以提高我国在这一领域的检测水平，推动国内对阻火器性能完整检测现有技术的完善，同时对保障安全生产和人民的生命安全也具有重要的现实意义。

关键词: 可燃气体爆炸, 安全技术, 阻火器, 阻火单元, 性能测试方法

Abstract: The combustible gas explosions occurred frequently in modern industry，and these hazards have resulted in a great amount of casualties and property losses. So the research of combustion and explosion of combustible gas in pipeline has become an important subject in the fields of safe technology. Flame arrester is a kind of safety equipment which can prevent flammable gas and liquid vapors from spreading，and widely used in petrochemical and natural gas industry in recently years.As a class of safety equipment, flame arrester is installed in the import and export of the device or pipe. Element which is the core components of flame arrester allows media circulation and block off the flame. With the development of modem society，people pay much attention on safe production. Accordingly，the performance test on flame arresters used for safe production seems to be necessary.The research of the flame arrester related detection technology started very later in China, and relative to the foreign standards, domestic standards technology is backward in technology, shorter period of refresh technology, incomplete standard system. So in this paper the study of flame arrester performance test method is carried out, in order to improve the detection level in this field, and promote the existing technology that complete performance detection of flame arrester. At the same time, it will be benefit for both of explosion prevention and the security of production and people.

Key words: gas explosions, safe technology, flame arrester, element, performance test method

中图分类号:

X937

孙少辰, 毕明树, 刘刚, 刘铎. 阻火器性能测试方法试验性研究[J]. 化工学报, 2014, 65(S1): 441-450.

SUN Shaochen, BI Mingshu, LIU Gang, LIU Duo. A pilot study of flame arrester performance test methods[J]. CIESC Journal, 2014, 65(S1): 441-450.

参考文献 19

[1]	Stanley S Grossel. Deflagration and Detonation Flame Arresters[M]. New York: Process Safety and Design Inc., 2002: 5-14
[2]	Bauer P. Experimental investigation on flame and detonation quenching: applicability of static flame arresters[J]. Journal of Loss Prevention in the Process Industries, 2005, 2(18): 63-68
[3]	Palmer K N, Rogowski Z W. The use of flame arresters for protection of enclosed equipment in propane-air atmospheres[J]. IChemE Symposium Series, 1968, 25: 76-85
[4]	Palmer K N, Tonkin P S. The quenching of propane-air explosion by crimped-ribbon flame arresters[J]. IChemE Symposium Series, 1963, 15: 16-20
[5]	Thomas G O, Oakley G L. On practical difficulties encountered when testing flame and detonation arresters to BS 7244[J]. Trans. IChemE, 1993, 71(1): 187-193
[6]	Howard W B. Process safety technology and the responsibility of industry[J]. Chemical Engineering Progress, 1988, 84(9): 25-33
[7]	Desai V M. A flare deflagration incident at rohm and haas[J]. Process Safety Progress, 1996, 15(3): 166-167
[8]	Howard W B. Flame arresters and flashback preventers[J]. Plant/Operations Progress, 1983, 1(4): 203-208
[9]	Roussakis N, Lapp L. A comprehensive test method for inline flame[J]. Plant/Operations Progress, 1991, 10(2): 85-92
[10]	Asano S, Ikeda S, Youn Y, Kagawa T. Visualization of behaviors of a propagating flame quenching for hydrogen-air gas mixture[J].Journal of Visualization, 2010, 13(2): 107-119
[11]	Beauvais R, Mayinger F, Strube G. Turbulent flame acceleration mechanisms and significance for safety considerations[J]. International Journal of Hydrogen Energy, 1994, 19(8): 701-708
[12]	Britton L G. Using maximum experimental safe gap to select flame arresters[J]. Process Safety Progress, 2000, 19(3): 140-145
[13]	Kakutkina N A, Korzhavin A A, Rychkov A D. Burning-through of porous flame arresters with a channel flame-arrester element[J].Combustion Explosion and Shock Waves, 2009, 45(3): 266-273
[14]	Kawashima K, Youn Y, Kagawa T. Development of a nozzle-flapper type servo valve using a slit structure[J]. Journal of Fluids Engineering, 2007, 129: 573-578
[15]	Lee J H, Knystautas R, Chan C. High speed turbulent deflagrations and transition to detonation in H2-air mixtures[J]. Combustionand Flame, 1984, 56(2): 227-239
[16]	Lietze D. Crimped metal ribbon flame arrestors for the protection of gas measurement systems[J]. Journal of Loss Prevention in the Process Industries, 2002, 15(1): 29-35
[17]	Lietze D. Limit of safety against flame transmission for sintered metal flame arrester elements in the case of flashback in fuel gas-oxygen mixtures[J]. Journal of Loss Prevention in the Process Industries, 1995, 8(6): 325-332
[18]	Mallens R M M, De Goey L P H. Flame cooling by a curved burner wall[J]. International Journal of Heat and Mass Transfer, 1998,41(4): 699-707
[19]	Popp P, Baum M. Analysis of wall heat fluxes, reaction mechanisms, and unburnt hydrocarbons during the head-on quenching of a laminar methane flame[J]. Combustion and Flame, 1997, 108(3): 327-337

阻火器性能测试方法试验性研究

A pilot study of flame arrester performance test methods

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 19

相关文章 4

编辑推荐

Metrics

本文评价

[1]	姚箭, 刘健, 王永旭, 李斌, 解立峰, 宋庆学. 新型阻火器阻爆性能检测系统研制[J]. 化工学报, 2017, 68(4): 1728-1733.
[2]	孙少辰, 毕明树, 刘刚, 邓进军. 爆轰火焰在管道阻火器内的传播与淬熄特性[J]. 化工学报, 2016, 67(5): 2176-2184.
[3]	孙少辰1，2，刘刚2，毕明树1，张志毅2. 阻火器性能测试试验系统的研制[J]. 化工进展, 2014, 33(11): 2853-2860.
[4]	皇甫立霞, 郭开华. 液化天然气场站安全技术标准规范及发展动态 [J]. 化工学报, 2009, 60(S1): 11-15.