1 Zhang, Z., Li, Y.Z., Xu, Q., “Experimental research on flow maldistribution in plate-fin heat exchangers”, Chi-nese J. Chem. Eng., 12(1), 7—13 (2004). 2 Yee, T.F., Grossmann, I.E., Kravanja, Z., “Simultaneous optimization models for heat integration—I, Area and energy targeting and modeling of multi-stream exchang-ers”, Comput. Chem. Eng., 14 (10), 1151—1164 (1990). 3 Prabhakara, R.B., Krishna, K.P., Sarit, K.D., “Effect of flow distribution to the channels on the thermal per-formance of a plate heat exchanger”, Chem. Eng. Proc., 41(1), 41—58 (2002). 4 Fleming, R.B., “The effect of flow distribution in parallel channels of counter-flow heat exchangers”, Adv. Cryog. Eng., 12, 352 (1967). 5 Chiou, J.P., “The combined effects of maldistributions of inlet air temperature and the induced flow nonuniformity on the performance of radiator”, In: Heat and Oil Cooler Int. Conf., SAE paper, 850037 (1985). 6 Ranganayakulu, Ch., Seetharamu, K.N., “The combined ef-fects of wall longitudinal heat conduction, inlet fluid flow nonuniformity and temperature nonuniformity in compact tube-fin heat exchangers: A finite element method”, Int. J. Heat Mass Transfer, 42, 263—273 (1999). 7 Jiao, A.J., Li, Y.Z., Chen, C.Z., “Experimental investiga-tion on flow maldistribution in plate-fin heat exchanger”, Heat Transfer Eng., 24(4), 25—31(2003). 8 Zhang, Z., Li, Y.Z., “CFD simulation on inlet configura-tion of plate-fin heat exchanger”, Cryogenics, 43(12), 673—678 (2003). 9 Wen, J., Li, Y.Z., “Study of flow distribution and its im-provement on the header of plate-fin heat exchanger”, Cryogenics, 44 (11), 823—831 (2004). 10 Weterweel, J., “Fundamentals of digital particle image ve-locimetry”, Meas. Sci. Technol., 8 (12), 1392—1397 (1997). 11 Sheng, J., Meng, H., Fox, R.O., “A large eddy PIV method for turbulence dissipation rate estimation”, Chem. Eng. Sci., 55, 4423—4434 (2000). 12 Duursma, G.R., Glass, D.H., Rix, S.J.L., “PIV investiga-tions of flow structures in the fluidised bed freeboard re-gion”, Powder Technol., 120, 2—11 (2001). |