[1] Fan,L.S.,Gas-Liquid-Solid Fluidization Engineering,But-terworth,Boston (1989). [2] Zhang,J.Y.,"The future challenge on fluidization tech-nology",Fujian Chemical Industry,4,1-4 (1998).(inChinese) [3] Cova,D.R.,"Catalyst suspension in gas-agitated tubularreactor",Ind.Eng.Chem.Process Des.Dev.,5,20-25(1966). [4] Garside,J.,Al-Dibouni,M.R.,"Velocity-voidage relation-ships for fluidization and sedimentation in solid-liquid sys-tems’’,Ind.Eng.Chem.Process Des.Dev.,16 (2),206214 (1977). [5] Al-Dibouni,M.R.,Garside,J.,"Particle mixing and clas-sification in liquid fluidized beds",Trans.Inst.Chem.Engrs.,57,94-103 (1979). [6] Kato,Y.,Morooka,S.,Kago,T.,Saruwatari,T.,Yang,S.,"Axial holdup distributions of gas and solid particles inthree-phase fluidized bed for gas-liquid (slurry)-solid sys- tems",J.Chem.Eng.Japan,18 (4),308-313 (1985). [7] Smith,D.N.,Ruether,J.A.,"Dispersed solid dynamics ina slurry bubble column reactor",Chem.Eng.Sci.,40 (5),741-754 (1985). [8] Smith,D.N.,Ruether,J.A.,Shah,Y.T.,Badgujar,M.N.,"Modified sedimentation-dispersion model for solids ina three-phase slurry column",AIChE J.,32 (3),426-436(1986). [9] Matsumoto,T.,Hidaka,N.,Morooka,S.,"Axial distribu-tion of solid holdup in bubble column for gas-liquid-solidsystems",AIChE J.,35 (10),1701-1709 (1989). [10] Matsumoto,T.,Hidaka,N.,Takebayasi,Y.,Morooka,S.,"Axial distribution an segregation in a gas-liquid-solidthree-phase fluidized bed of solid particles of different sizedand densities",Chem.Eng.Sci.,52 (21/22),3961--3970(1997). [11] Richardson,J.F.,Zaki,W.N.,"Sedimentation and flu-idization: Part 1",Trans.Instn.Chem.Engrs.,32,35-53(1954). [12] Zhang,J.Y.,,"Computation of free-terminal velocity ofspherical particle",Chem.Eng.,1,18-31 (1976).(inChinese) [13] Pettyjohn,E.S.,Christiansen,E.B.,"Effect of particleshape on free-settling rates of isometric particles",Chem.Eng.Progr.,44 (2),157-172 (1948). [14] Zenz,F.A.,Othmer,D.F.,Fluidization and Fluid-ParticleSystems,Reinhold Publishing Corporation,New York,108(1960). [15] Matsumoto,T.,Hidaka,N.,Kamimura,H.,Tsuchiya,M.,Shimizu,T.,Morooka,S.,"Turbulent mixing-length modelfor axial turbulent diffusion of liquid in three-phase fluidizedbed",J.Chem.Eng.Japan,21 (3),256-261 (1988). |