CIESC Journal ›› 2005, Vol. 56 ›› Issue (8): 1385-1388.
Previous Articles Next Articles
WANG Xinhong;JIA Qi;GAO Jin;XIA Shuqian;MA Peisheng
Online:
Published:
王新红;贾琦;高进;夏淑倩;马沛生
Abstract: Critical temperatures and critical pressures of four thermally unstable substances,including butyl acrylate, methyl methacrylate, allyl acetone and allyl alcohol,were measured for the first time via the quick-flow method. In the process,a small amount of sample was heated up to critical state in a very short time as it was passing through a capillary glass tube.The variation relationships of apparent critical properties with residence time were determined and the critical properties data were subsequently obtained by means of extrapolation. Polymerization reaction and other side reactions during the heating up process were minimized thanks to the short residence time less than 12 seconds.Therefore, this method is fit for measuring critical temperature and critical pressure of thermally unstable substance. The reliability of experimental apparatus was verified with 1-heptene as the standard substance whose accurate critical properties can be referred to in literatures.
Key words: 临界参数, 流动法, 停留时间, 热不稳定物质
关键词: 临界参数, 流动法, 停留时间, 热不稳定物质
WANG Xinhong, JIA Qi, GAO Jin, XIA Shuqian, MA Peisheng. Determination of critical temperatures and critical pressures of four thermally unstable substances[J]. CIESC Journal, 2005, 56(8): 1385-1388.
王新红, 贾琦, 高进, 夏淑倩, 马沛生. 四种不稳定化合物临界温度和临界压力的测定 [J]. 化工学报, 2005, 56(8): 1385-1388.
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: https://hgxb.cip.com.cn/EN/
https://hgxb.cip.com.cn/EN/Y2005/V56/I8/1385
NI Jianjun;GUO Qinghua;LIANG Qinfeng;YU Zunhong;YU Guangsuo
Stochastic modeling of particle residence time distribution in impinging-streams gasifier
Removal of chromium ion from water by using ferrous coprecipitation foam separation
Mixing and transport of partcles in rotating cone
Diagnosis of membrane passage defects for reverse osmosis spiral wound membrane module
ZHOU Guangda;CAO Kun ;YAO Zhen;LI Bogeng;HU Guohua
Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder
GAS FLOW BEHAVIOR IN A ROUGH-CUT CYCLONE IN FCC DISENGAGER