The Axial and Radial Solid Loadings up the CFB-Riser

• RESEARCH NOTES • Previous Articles Next Articles

The Axial and Radial Solid Loadings up the CFB-Riser

Kathleen Smolders; Jan Baeyens

Chemical Engineering Department, Katholieke Universiteit Leuven de Croylaan 46, B-3001
Heverlee, Belgium

Received:1900-01-01 Revised:1900-01-01 Online:2000-06-28 Published:2000-06-28
Contact: Kathleen Smolders

循环流化床提升管中的轴向和径向固体负荷

Kathleen Smolders; Jan Baeyens

Chemical Engineering Department, Katholieke Universiteit Leuven de Croylaan 46, B-3001
Heverlee, Belgium

通讯作者: Kathleen Smolders

Abstract

Kathleen Smolders, Jan Baeyens. The Axial and Radial Solid Loadings up the CFB-Riser[J]. .

Kathleen Smolders, Jan Baeyens. 循环流化床提升管中的轴向和径向固体负荷[J]. CIESC Journal.

[1] Yerushalmi, J., Cankurt, N. T., Powder Technol., 24, 187(1979).
[2] Takeuchi, H., Hirama, T., Chiba, T., Biswas, J., Leung, L.S., Powder Technol., 47, 195
(1986).
[3] Arena, U., Marzocchella, A., Massimilla, L., Malandrino,A., Powder Technol., 70, 237
(1992).
[4] Hirama T., Takeuchi, H., Chiba, T., Powder Technol., 70;215 (1992).
[5] Mori, S., Liu, D., Kato, K., Kobayashi, E., Powder Technol., T0, 223 (1992).
[6] Wong, R., Pugsley, T., Berruti, F., Chem. Eng. Sci., 47,2301 (1992).
[7] Glicksman, L. R., Hyre, M., Woloshun, K., Powder Technol., 77, 177 (1993).
[8] Arena, U., Cammarota, A., Pistone, L., Circulating Fluidized Bed Technology, Basu, P.,
Ed., Pergamon Press,Toronto, 119 (1986).
[9] Van der Ham, A. G. J., Prins, W., Van Swaaij, W., AIChESyup. Series, 89 (296), 53
(1992).
[10] Hartge, E.-U., Rensner, D., Werther, J., Circulating Fluidized Bed Technology Ⅱ,
Basu, P., Large, J. F., Eds., Pergamon Press, Toronto, 165 (1988).
[11] Brereton, C. M. H., Ph. D. Thesis, University of BritishColumbia, Vancouver, Canada
(1987).
[12] Riley, C. A., Louge, M., Particulate Science Technol., 7, 51(1989).
[13] Weinstein, H., Shao, M., Schnitz.lein, M., Circulating Fluidized Bed Technology, Basu,
P., Ed., Pergamon Press,Toronto, 201 (1986).
[14] Rhodes, M. J., Laussman, P., Villain, F., Geldart, D., Circulating Fluidized Bed
Technology Ⅱ, Basu, P., Large, J.F., Eds., Pergamon Press, Toronto, 155 (1986).
[15] Rhodes, M. J., Laussman, P., Powder Technol., 70, 141(1992).
[16] Ishii, H., Horio, M., Adv. Powder Technol., 2, (1) 25 (1991).
[17] Horio, M., Ishii, H., Nishimuro, M., Powder Technol., 70,229 (1992).
[18] Wang, Z., Bai, D., Jin, Y., Powder Technol., 70, 271 (1992).
[19] Zhou, J., Grace, J. R., Qin, S., Brereton, C. M. H., Lim, C.J., Zhu, J., Chem. Eng.
Sci., 49, 3217 (1994).
[20] Rhodes, M. J., Mineo, H., Hirama, T., Powder Technol.,70, 207 (1992).
[21] Li, H., Xia, Y., Tung, Y., Kwauk, M., Powder Technol., 66,231 (1991).
[22] Horio, M., Kuroki, H., Chem. Eng. Sci., 49, 2413 (1994).
[23] Smolders, K., Ph. D. Thesis, Katholieke Universiteit Leuyen, Belgium (1999).
[24] Smolders, K., Baeyens, J., Adv. Powder Technol., 9, 17(1999).
[25] Louge, M., Chang, H., Powder Technol., 60, 197 (1990).
[26] Smolders, K., Baeyens, J., Powder Handling and Processing, 9, 123 (1997).
[27] Yerushalrni, J., Avidan, A. A., Fluidization, 2nd ed., Davidson, J. F., Clift, R.,
Harrison, D., Eds., Academic Press,New York, 226 (1985).
[28] Rhodes, M. J., Ph. D. Thesis, University of Bradford, UK(1986).
[29] Berruti, F., Kalogerakis, N., Can. J. Chem. Eng., 67, 1010(1989).
[30] Patience, G. S., Chaouki, J., Berruti, F., Wong, R., PowderTechnol., 72, 31 (1992).
[31] Matsen, J. M., Powder Technol., 32, 21-33 (1982).
[32] Smolders, K., Baeyens, J., Adv. Powder Technol., 9, 17(199S).
[33] Yang, Y. L., Jin, Y., Yu, Z. Q., Zhu, 1. X., Bi, H. T., AIChE Syup. Series, 89 (296),
81 (1993).