[1] Podratz, D.J., Kleemeier, K., Turner, W.J., Moyse, B.M.,"Mixed-distillate hydrotreating residues costs", Oil & Gas J., 97 (20), 1401 (1999). [2] Liao, S.G., "Technologies of hydrocracking for the 21th century", Petroleum Refinery Engeering, 29 (5), 1 (1999). (in Chinese) [3] Yao, G.X., "Review and prospects of the foreign hydrocracking technologies", Petroleum Refinery Engeering, 26(4), 40 (1996). (in Chinese) [4] Tamas, K., "Effect of pretreatment on HDS activity of supported NiW and NiMo catalysts", React. Kinet. Catal.Lett., 67 (2), 391 (1999). [5] Absi-Halabi, M., Stanislaus, A., Al-Dolama K., "Performance comparison of alumina- supported Ni-Mo, Ni-W and Ni-Mo-W catalysts in hydrotreating vacuum residue", Fuel,77 (7), 7S7 (1998). [6] Koseoglu, R.O., Phillips, C.R., "Kinetics of non-catalytic hydrocracking of Athabasca bitumen", Fuel, 66 (2), 741(1987). [7] Yui, S.M., Sanford, E.C., "Mild hydrocracking of bitumenderived coker and hydrocracker heavy gas oils: kinetics,product yields, and product properties", Ind. Eng. Chem.Res., 28 (9), 1278 (1989). [8] Topsφe, H., Clausen, B.S., "Importance of Co-Mo-S type structure in hydrodesulfurization", Catal. Rev. Sci. Eng.,26, 395 (1984). [9] Cotton, F.A., Advanced Inorganic Chemistry, WileyInterscience, Newyork, 265 (1999). [10] Ryuichiro, I., Jean, G., "Hydrotreatment and hydrocracking of oil fractions", Proceeding of the 2nd International Symposium/7th European Workshop, Elsevier, NewYork,169 (1999). [11] Atanasova, P., Halachev, T., "Effect of phosphorus on the surface concentration of molybdenum and nickel in the oxide form of nickel-molybdenum/alumina catalysts and on their hydrodesulphurization activity", Appl. Catal., 38,235 (1988). [12] Jones, J.M., Kydd, R.A., "Ni-Mo/Al2O3 catalysts promoted with phosphorus and fluoride", Fuel, 74 (12), 1875(1995). [13] Chen, Y.W., Hsu, W.C., Lin, C.S. "Hydrodesulphurization reactions of residual of residual oils over Co-Mo/ aluminaaluminum phosphate catalysts in a trickle bed reactor", Ind.Eng. Chem. Res., 29, 1830 (1990). [14] Lin, S.X., Petroleum Processing Engineering, 2nd ed.,Petroleum Industry Publishing Company, Beijing, 251(1988). (in Chinese)
|