三维双侧强化管内R410A蒸发换热特性

doi:10.11949/j.issn.0438-1157.20181086

化工学报 ›› 2018, Vol. 69 ›› Issue (S2): 76-81.DOI: 10.11949/j.issn.0438-1157.20181086

三维双侧强化管内R410A蒸发换热特性

陈景祥¹, 李蔚¹, 朱华¹, 金春花², 杜锦才¹, 张政江¹, 刘丽³

1 浙江大学能源工程学院, 浙江杭州 310027;
2 无锡佳龙换热器股份有限公司, 江苏无锡 214092;
3 青岛科技大学机电工程学院, 山东青岛 266061

收稿日期:2018-09-26 修回日期:2018-10-02 出版日期:2018-12-31 发布日期:2018-12-31
通讯作者: 李蔚
基金资助:
国家自然科学基金项目（51210011）。

Evaporation heat transfer performance of R410A inside 3-D double-enhanced tubes

CHEN Jingxiang¹, LI Wei¹, ZHU Hua¹, JIN Chunhua², DU Jincai¹, ZHANG Zhengjiang¹, LIU Li³

1 College of Energy Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China;
2 Wuxi Jialong Heat Exchanger Stock Co. Ltd., Wuxi 214092, Jiangsu, China;
3 Institute of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, Shandong, China

Received:2018-09-26 Revised:2018-10-02 Online:2018-12-31 Published:2018-12-31
Supported by:
supported by the National Natural Science Foundation of China (51210011).

摘要/Abstract

摘要：

研究R410A制冷剂在新研发的内径为11.07 mm的三维双侧强化管内的蒸发换热特性，并与相同直径的光管内蒸发换热特性进行了对比。实验段测试管长2 m，制冷剂质量流速范围为70～150 kg/（m²·s），饱和温度维持在10 ℃，干度变化范围为0.1～0.9。分析了低质量流速低干度和低质量流速高干度区域内光管和强化管内传热特性。光管实验结果同4个蒸发关联式进行比较，结果表明关联式的预估值与95.48%的光管实验数据吻合误差在±20%以内。

Abstract:

An experimental investigation on R410A evaporation characteristics inside newly developed 3-D enhanced tubes is performed, and the results are compared with a smooth tube with inner diameter of 11.07 mm. The test section is a 2 m long tube-in-tube heat exchanger and the mass flux ranges from 70 to 150 kg/(m²·s), vapor quality ranges from 0.1 to 0.9 when saturation temperature is maintained at 10℃.The heat transfer characteristics in low vapor quality region and high vapor quality region are discussed within the tested mass flux range. Four evaporation correlations are introduced to validate the test results of the smooth tube, and the results show that the predicted values have a good consistence with the experimental results.

中图分类号:

TK121

陈景祥, 李蔚, 朱华, 金春花, 杜锦才, 张政江, 刘丽. 三维双侧强化管内R410A蒸发换热特性[J]. 化工学报, 2018, 69(S2): 76-81.

CHEN Jingxiang, LI Wei, ZHU Hua, JIN Chunhua, DU Jincai, ZHANG Zhengjiang, LIU Li. Evaporation heat transfer performance of R410A inside 3-D double-enhanced tubes[J]. CIESC Journal, 2018, 69(S2): 76-81.

参考文献 17

[1]	王聪,翟晓强,李卉,等.相变蓄冷换热器性能的实验研究[J].制冷技术,2014,34(2):11-15.WANG C, ZHAI X Q, LI H, et al.Experimental study on a cold storage heat exchanger[J].Chinese Journal of Refrigeration Technology, 2014, 34(2):11-15.
[2]	朱斌祥,张缓缓,曲本连,等.制冷空调设备绿色设计的技术和实践探讨[J].制冷技术,2015,35(6):57-62.ZHU B X, ZHANG H H, QU B L, et al. Technical and practical discussion on green design of refrigeration and air conditioning equipments[J].Chinese Journal of Refrigeration Technology, 2015, 35(6):57-62.
[3]	QIN W, CHEN F S, ZHU Z W, et al. Experimental study on HFC-161 mixture as an alternative refrigerant to HCFC-22[J].Journal of Engineering Thermophysics, 2009, 140(1):769-776.
[4]	HOSSAIN M A, ONAKA Y, MIYARA A.Experimental study on condensation heat transfer and pressure drop in horizontal smooth tube for R1234ze(E), R32 and R410A[J].International Journal of Refrigeration, 2012, 35(4):927-938.
[5]	郭潇扬,张华,邱金友,等.R1234ze(E)在水平管内流动沸腾换热特性的实验研究[J].制冷技术,2016,36(1):6-10.GUO X Y, ZHANG H, QIU J Y, et al. Experimental study of heat transfer characteristics of R1234ze(E) flow boiling inside horizontal tube[J].Chinese Journal of Refrigeration Technology, 2016, 36(1):6-10.
[6]	胡海涛,丁国良,汪振策,等.R410A-油在?7 mm水平直强化管内流动沸腾阻力特性[J].上海交通大学学报,2007,41(3):376-379.HU H T, DING G L, WANG Z C, et al.Frictional pressure drop characteristics of R410A-oil mixture fow boiling inside 7 mm enhanced horizontal tubes[J].Journal of Shanghai Jiao Tong University, 2007, 41(3):376-379.
[7]	胡海涛,丁国良,黄翔超,等.R410A-油在?5 mm小管径光管内流动沸腾的阻力特性[J].上海交通大学学报,2008,42(3):394-398.HU H T, DING G L, HUANG X C, et al. Frictional pressure drop characteristics of R410A-oil mixture fow boiling inside 5 mm smooth horizontal tubes[J].Journal of Shanghai Jiao Tong University, 2008, 42(3):394-398.
[8]	SHAFAEE M, MASHOUF H, SARMADIAN A, et al. Evaporation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes[J].Applied Thermal Engineering, 2016, 107:28-36.
[9]	ZHANG X Y, ZHANG X Q, CHEN Y G, et al. Heat transfer characteristics for evaporation of R417a flowing inside horizontal smooth and internally grooved tubes[J].Energy Conversion and Management, 2008, 49(6):1739-2008.
[10]	CHENG L X, XIA G D.Fundamental issues, mechanisms and models of flow boiling heat transfer in microscale channels[J].International Journal of Heat and Mass Transfer, 2017, 108(A):97-127.
[11]	CHENG L X.Fundamental issues of critical heat flux phenomena during flow boiling in microscale-channels and nucleate pool boiling in confined spaces[J].Heat Transfer Engineering, 2013, 34(13):1016-1043.
[12]	MARADIYA C, VADHER J, AGARWAL R.The heat transfer enhancement techniques and their thermal performance factor[J].Beni-Suef University Journal of Basic and Applied Sciences, 2018, 7(1):1-21.
[13]	WOJTAN L, URSENBACHER T, THOME J R.Investigation of flow boiling in horizontal tubes (Ⅰ):A new diabatic two-phase flow pattern map[J].International Journal of Heat and Mass Transfer, 2005, 48(14):2955-2969.
[14]	FANG X D, WU Q, YUAN Y L.A general correlation for saturated flow boiling heat transfer in channels of various sizes and flow directions[J].International Journal of Heat and Mass Transfer, 2016, 107:972-981.
[15]	GUNGOR K E, WINTERTON R H S.A general correlation for flow boiling in tubes and annuli[J].International Journal of Heat and Mass Transfer, 1986, 29(3):351-358.
[16]	LIU Z, WINTERTON R H S.A general correlation for saturated and subcooled flow boiling in tubes and annuli based on a nucleate pool boiling equation[J].International Journal of Heat and Mass Transfer, 1991, 34(11):2759-2766.
[17]	MAHMOUD M M, KARAYIANNIS T G.Heat transfer correlation for flow boiling in small to micro tubes[J].International Journal of Heat and Mass Transfer, 2013, 66(11):553-574.

三维双侧强化管内R410A蒸发换热特性

Evaporation heat transfer performance of R410A inside 3-D double-enhanced tubes

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 17

相关文章 15

编辑推荐

Metrics

本文评价

[1]	孙艳军, 邸高雷, 夏娟, 王晓坡, 金立文. 以离子液体为吸收剂的吸收式制冷循环热力学分析[J]. 化工学报, 2018, 69(S2): 38-44.
[2]	周云龙, 郭新田, 张文超, 陈旭. 三面加热窄矩形通道内饱和沸腾起始点的实验研究[J]. 化工学报, 2018, 69(12): 4972-4978.
[3]	高明, 孔鹏, 章立新. 恒热流条件下亲疏水表面液滴蒸发特性[J]. 化工学报, 2018, 69(7): 2979-2984.
[4]	杜敏, 黄彬, 卢麒丞, 龚俊, 罗明, 王助良. 撞击流内液滴碰撞后续发展行为[J]. 化工学报, 2018, 69(5): 2023-2031.
[5]	孔令健, 韩吉田, 陈常念, 刘志刚. 立式和卧式螺旋管内过冷沸腾起始点特性[J]. 化工学报, 2018, 69(5): 1956-1963.
[6]	姜林林, 柳建华, 张良, 赵越. 水平微细管内CO₂流动沸腾换热特性[J]. 化工学报, 2018, 69(4): 1428-1436.
[7]	杨建, 孟现阳, 高克慧, 吴江涛. 正戊烯的Helmholtz状态方程研究[J]. 化工学报, 2018, 69(4): 1315-1323.
[8]	周明熙, 周昊, 马鹏楠, 程明. 基于CT显微图像的烧结矿孔隙特征分析及有效热导率预测[J]. 化工学报, 2018, 69(2): 633-641.
[9]	姜林林, 柳建华, 张良, 赵越. 水平微细管内CO₂流动沸腾压降特性[J]. 化工学报, 2017, 68(12): 4576-4584.
[10]	孟现阳, 于野, 吴江涛. 正丙醇黏度方程研究[J]. 化工学报, 2017, 68(11): 4035-4042.
[11]	李云, 胡浩威. 润湿性对纳米多孔陶瓷膜输运性能的影响[J]. 化工学报, 2017, 68(9): 3474-3481.
[12]	李玮, 刘芳, 陈宝明, 魏茂丰, 郜凯凯, 耿文广. 寒冷地区湿传递对多层墙体热湿性能的影响[J]. 化工学报, 2017, 68(S1): 162-168.
[13]	孙艳军, 王晓坡, 刘志刚, 金立文. 1,3,3,3-四氟丙烯与异三十烷汽液相平衡实验测量[J]. 化工学报, 2017, 68(8): 2979-2984.
[14]	陈宏霞, 黄林滨, 宫逸飞. 微通道分流弹状流的界面过程及压力演变规律[J]. 化工学报, 2017, 68(8): 3030-3038.
[15]	肖清泰, 黄峻伟, 潘建新, 刘赟, 徐建新, 王华. 直接接触式沸腾换热过程气泡混合均匀度评价[J]. 化工学报, 2017, 68(8): 3049-3055.