化工学报 ›› 2012, Vol. 63 ›› Issue (12): 3971-3977.DOI: 10.3969/j.issn.0438-1157.2012.12.033

• 过程系统工程 • 上一篇    下一篇

基于加权偏离度统计方法的预测控制性能评估算法

赵超1, 张登峰2, 许巧玲1, 李学来1   

  1. 1. 福州大学化学化工学院, 福建 福州 350108;
    2. 南京理工大学机械工程学院, 江苏 南京 250208
  • 收稿日期:2012-08-06 修回日期:2012-08-16 出版日期:2012-12-05 发布日期:2012-08-29
  • 通讯作者: 赵超
  • 作者简介:赵超(1976-),男,副教授。
  • 基金资助:

    国家自然科学基金项目(60804027)。

Control performance assessment of model predictive control based on statistics analysis of weighted points

ZHAO Chao1, ZHANG Dengfeng2, XU Qiaoling1, LI Xuelai1   

  1. 1. College of Chemistry and Chemical Engineering, Fuzhou University, Fuzhou 350108, Fujian, China;
    2. School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 250208, Jiangsu, China
  • Received:2012-08-06 Revised:2012-08-16 Online:2012-12-05 Published:2012-08-29
  • Supported by:

    supported by the National Natural Science Foundation of China(60804027).

摘要: 针对带区域约束条件的预测控制系统性能评估问题,在考虑过程输出变量约束类型的基础上,提出了基于加权偏离度统计方法的控制性能评估算法。该方法依据控制要求的不同,将输出变量分为质量变量和约束变量,并结合工程经验合理选择变量的权重。基于系统闭环运行数据和约束设置,通过计算变量的加权偏离度得到控制系统的性能评估指标,从而为预测控制器的参数调整和性能提升提供了决策依据。系统仿真实例和工程应用证明了该评估算法对区域预测控制系统性能评估的有效性。

关键词: 控制系统性能评估, 模型预测控制, 区域控制, SHELL重油分馏塔模型

Abstract: With the goals of optimal performance,energy conservation and cost effectiveness of process operations in industry,controller performance assessment of process control have received great attention in both academia and industry.Controller performance monitoring and assessment are necessary to assure effectiveness of model predictive control systems and consequently safe and profitable plant operation. Taking region constraint properties of model predictive control(MPC)into consideration,a novel approach based on the weighted point statistics is developed for the performance assessment of region control(RC)problems in this study.All controlled variables are grouped into two categories:constrained variables(CVs)and quality variables(QVs),according to the importance of the controlled variables in MPC systems.By introducing the weighted points for all controlled variables,the performance index is calculated based on the statistics analysis of closed-loop data sets,which can be used to assess the performance of an MPC control system.The important advantage of the proposed approach is that just the routine closed-loop operation data of the system and constrained region of each CV are required,which is convenient for the industrial applications.Simulation example and industrial case study illustrate the applicability of the proposed approach.

Key words: control performance assessment, model predictive control, regional control, SHELL heavy oil fractionary model

中图分类号: