Flowability and anti-static properties of high impact polypropylene particles

doi:10.11949/j.issn.0438-1157.20161037

CIESC Journal ›› 2017, Vol. 68 ›› Issue (2): 767-773.DOI: 10.11949/j.issn.0438-1157.20161037

Previous Articles Next Articles

Flowability and anti-static properties of high impact polypropylene particles

XU Hongbin¹, CHEN Wei², WU Yan², MEI Li¹, YAO Zhen², DA Wenzhong¹, CAO Kun²

1. Nanjing Research Institute of SINOPEC Yangzi Petrochemical Company Limited, Nanjing 210047, Jiangsu, China;
2. State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China

Received:2016-07-22 Revised:2016-11-05 Online:2017-02-05 Published:2017-02-05
Supported by:
supported by the National High Technology Research Program of China (2012AA040306).

高抗冲聚丙烯颗粒的流动性及其抗静电性

徐宏彬¹, 陈薇², 武燕², 梅利¹, 姚臻², 笪文忠¹, 曹堃²

1. 中国石化扬子石油化工有限公司南京研究院, 江苏南京 210047;
2. 化学工程联合国家重点实验室, 浙江大学化学工程与生物工程学院, 浙江杭州 310027

通讯作者: 曹堃
基金资助:
国家高技术研究发展计划项目（2012AA040306）。

Abstract

Abstract:

With the increase of ethylene content in gas phase fluidized bed, stickiness and agglomeration among high impact polypropylene granules seriously impacted on particle flowability and continuous production. Adding a small amount of inert inorganic superfine powders could effectively reduce the sticky agglomeration. The cold-flow model study was to analyze impact of superfine powders such as spherical silica and layered hydrotalcite (HT), as well as to explore electrostatic formation and effect on flowability. Compared to untreated powders, powders modified by antistatic agents could decrease accumulation of static charges, shorten dropping time, and enhance flowability of particles. Overall, hydrotalcite showed better effect than silica.

Key words: high impact polypropylene, superfine powder, antistatic agent, flowability

摘要：

随着气相釜中乙烯含量的增加，高抗冲聚丙烯颗粒会出现发黏、聚并等现象，严重影响其流动性及连续化生产。添加极少量惰性无机超细粉体是减少高抗冲聚丙烯颗粒间粘连的有效措施。通过冷模研究，剖析超细粉体的加入对颗粒流动性的影响，同时探讨体系静电的产生因素及其对颗粒流动性的影响。选用的超细粉体包括球形二氧化硅和层状水滑石。研究发现，相对于直接加入未改性处理的超细粉体，加入经抗静电剂改性的超细粉体后，颗粒的带电量明显减少，落下时间缩短，流动性也得到了有效提高；而且选用水滑石的效果明显优于二氧化硅。

关键词: 高抗冲聚丙烯, 超细粉体, 抗静电剂, 流动性

CLC Number:

TQ033

XU Hongbin, CHEN Wei, WU Yan, MEI Li, YAO Zhen, DA Wenzhong, CAO Kun. Flowability and anti-static properties of high impact polypropylene particles[J]. CIESC Journal, 2017, 68(2): 767-773.

徐宏彬, 陈薇, 武燕, 梅利, 姚臻, 笪文忠, 曹堃. 高抗冲聚丙烯颗粒的流动性及其抗静电性[J]. 化工学报, 2017, 68(2): 767-773.

References 23

[1]	GAHLEITNER M, TRANNINGER C, DOSHEV P. Heterophasic copolymers of polypropylene:development, design principles, and future challenges[J]. Journal of Applied Polymer Science, 2013, 130(5):3028-3037.
[2]	张清林, 陈航. 国内聚丙烯市场现状及其发展方向[J]. 塑料工业, 2011, 39(10):8-11. ZHANG Q L, CHEN H. Domestic polypropylene market situation and development direction[J]. China Plastics Industry, 2011, 39(10):8-11.
[3]	李神速. 浅谈五大通用塑料的应用与发展[J]. 现代塑料加工应用, 1995, 8(2):60-64. LI S S. Elementary introduction of application and development of five general plastics[J]. Modern Plastics Processing and Applications, 1995, 8(2):60-64.
[4]	王忠. 当代聚丙烯技术及发展[J]. 当代化工, 2008, 37(4):399-402. WANG Z. Polypropylene produce technology and development in the present age[J]. Contemporary Chemical Industry, 2008, 37(4):399-402.
[5]	安芳成. 聚丙烯行业发展现状及市场分析[J]. 化工进展, 2012, 31(1):246-251. AN F C. Current development review and market analysis on polypropylene industry[J]. Chemical Industry and Engineering Progress, 2012, 31(1):246-251.
[6]	WANG Y. Status quo and development of PP technologies in China[J]. China Synthetic Resin & Plastics, 2007, 3(24):1-5.
[7]	STAMHUIS J E. Mechanical properties and morphology of polypropylene composites[J]. Polymer Composites, 1984, 5(3):202-207.
[8]	LIU X, XU C, FENG Y, et al. Composition, structure and properties of impact propylene copolymer[J]. Petrochemical Technology, 2013, 42(1):30-33.
[9]	VESTBERG T, DENIFLP, WILEN C E. Increased rubber content in high impact polypropylene via a Sirius Ziegler-Natta catalyst containing nanoparticles[J]. Journal of Polymer Science Part A:Polymer Chemistry, 2013, 51(9):2040-2048.
[10]	COLLINA G, BRAGA V, SARTORI F. New thermoplastic polyolefins elastomers from the novel multicatalysts reactor granule technology:their relevant physical-mechanical properties after crosslinking[J]. Polymer Bulletin, 1997, 38(6):701-705.
[11]	CUI N, KE Y, LU Z, et al. Structure and properties of polypropylene alloy in situ blends[J]. Journal of Applied Polymer Science, 2006, 100(6):4804-4810.
[12]	GALLI P. The reactor granule technology:a revolutionary approach to polymer blends and alloys[J]. Macromolecular Symposia, 1994, 78(1):269-284.
[13]	LI C, GUO S, CHEN Y. Study on high impact polypropylene composites[J]. Engineering Plastics Application, 2006, 34(9):15-19.
[14]	笪文忠, 屠宇侠, 徐宏彬, 等. 高抗冲聚丙烯结构与性能分析的最新进展[J]. 化工学报, 2016, 67(2):397-403. DA W Z, TU Y X, XU H B, et al. Progress in analysis of structure and properties of hiPP[J]. CIESC Journal, 2016, 67(2):397-403.
[15]	FUJITA H, SAITO J, YASUDA Y, et al. Polypropylene composition:US6326432[P]. 2001-12-04.
[16]	HENDEWERK, MONICA L. Polypropylene composition and method for functionalization of polypropylene:US5001197[P]. 1991-03-19.
[17]	FIELDING I R, POPPE W. Polypropylene composition containing EPR:US4087486[P]. 1978-05-02.
[18]	笪文忠, 肖智贤, 徐宏彬, 等. 气相法制备高乙烯含量的高抗冲聚丙烯[J]. 化工学报, 2016, 67(2):667-671. DA W Z, XIAO Z X, XU H B, et al. Preparation of high impact polypropylene with high ethylene content by gas phase process[J]. CIESC Journal, 2016, 67(2):667-671.
[19]	卢晓英, 义建军. 抗冲共聚聚丙烯结构研究进展[J]. 高分子通报, 2010, 8(1):7-18. LU X Y, YI J J. Advance in structure research of impact polypropylene copolymer[J]. Polymer Bulletin, 2010, 8(1):7-18.
[20]	DONG K, ZHANG Q, HUANG Z, et al. Experimental investigation of electrostatic reduction in a gas-solid fluidized bed by an in situ corona charge eliminator[J]. Industrial & Engineering Chemistry Research, 2014, 53(37):324-329.
[21]	MEHRANI P, BI H T, GRANCE J R. Bench-scale tests to determine mechanisms of charge generation due to particle-particle and particle-wall contact in binary systems of fine and coarse particles[J]. Powder Technology, 2007, 173(2):73-81.
[22]	MEHRANI P, BI H T, GRANCE J R. Electrostatic behavior of different fines added to a Faraday cup fluidized bed[J]. Journal of Electrostatics, 2007, 65(1):1-10.
[23]	GLOR M. Ignition source static electricity:incident investigation[J]. Journal of Electrostatics, 2009, 67(2):242-246.

Flowability and anti-static properties of high impact polypropylene particles

高抗冲聚丙烯颗粒的流动性及其抗静电性

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References 23

Related Articles 6

Recommended Articles

Metrics

Comments

[1]	XU Guiling, LU Ping, XU Pan, LIANG Cai, CHEN Xiaoping. Influences of external moisture content in pulverized coal on discharge characteristics of top discharge blow tank [J]. CIESC Journal, 2016, 67(7): 2767-2776.
[2]	DA Wenzhong, XIAO Zhixian, XU Hongbin, TU Yuxia, MEI Li, YAO Zhen, CAO Kun. Preparation of high impact polypropylene with high ethylene content by gas phase process [J]. CIESC Journal, 2016, 67(2): 667-671.
[3]	DA Wenzhong, TU Yuxia, XU Hongbin, MEI Li, YAO Zhen, CAO Kun. Progress in analysis of structure and properties of hiPP [J]. CIESC Journal, 2016, 67(2): 397-403.
[4]	QI Haifeng, GUO Xiaolei, LU Haifeng, WU Fuyu, GONG Xin. Measurement of flowability of coal powders and study of research methods [J]. CIESC Journal, 2012, 63(2): 433-440.
[5]	SHI Ming, ZHENG Cheng, YU Xihuan, WANG Haojiang, YANG Yunong, WANG Zhengping, YANG Ling. Research of octadecyl methyl dihydroxyethyl ammonium bromide as antistatic agent in polypropylene [J]. CIESC Journal, 2012, 63(11): 3723-3729.
[6]	XU Xinde, YAO Shanjing, HAN Ning, SHAO Bin. Measurement and influence factors of the flowability of microcapsules with high-content β -carotene [J]. , 2007, 15(4): 579-585.