Abstract: How to uniformly distribute the liquid-solid two-phase flow is a difficulty which restricts the development of the liquid-solid fluidized bed.An Eulerian multiphase model incorporating the kinetic theory for solid particles was used to simulate the liquid-solid two-phase flow.The hydrodynamics in the lower vessel in a two-dimensional liquid-solid fluidized bed heat exchanger was simulated with the CFD method.The structural parameters of the liquid-solid distributor was optimized by simulation methods.The simulation results were in relatively good agreement with the experiments.The results indicated that when the angle of the V baffle was less than slide angle，the hole ratio of perforated plate was about 35% and the hole diameter was about 12 mm，the unevenness of solids volume fraction in the lower vessel was the least.

摘要： 流化床内液固两相流的均布问题一直是制约流化床发展的难点。本文采用颗粒动力学双流体模型来描述液固两相流，应用CFD方法模拟了二维液固流化床换热器下管箱中的流场流动特性，并用模拟手段优化了下管箱中液固分布器的结构参数。模拟结果与试验值吻合较好，模拟结果表明：在V型挡板角度小于滑落角的挡板型式下，多孔板的开孔率在35%左右，开孔直径大小在12mm左右时，下管箱中固含率的不均匀度最小，这种结构参数下液固分布器的分布效果最好。