CIESC Journal ›› 2008, Vol. 59 ›› Issue (9): 2371-2376.
Previous Articles Next Articles
YANG Youwen,YE Min,WU Yucheng,XIE Ting
Online:
Published:
杨友文,叶敏,吴玉程,解挺
Abstract:
Anodic alumina membrane(AAM)with a pore diameter of 60 nm was fabricated by the two-anode oxidation method.A mixture of Al2O3nanowires and nanotubes were obtained after the AAM was eroded in NaOH solution for about 4 min.The InSb/Al2O3 nanocables were fabricated when the AAM filled with the InSb nanowires by electrodeposition was eroded in the NaOH solution for 5 to 8 min.The formation mechanisms of the Al2O3nanowires,nanotubes and the InSb/Al2O3 nanocables were discussed.
Key words: 氧化铝模板, 纳米线, 纳米管, 纳米电缆
氧化铝模板,
摘要:
采用二次阳极氧化法制备得到孔径为60 nm的氧化铝模板。将氧化铝模板放入NaOH溶液中腐蚀约4 min左右,制备得到了氧化铝纳米管、纳米线的混合物。将沉积有InSb纳米线的氧化铝模板放入NaOH溶液中进行腐蚀5~8 min后,制备得到了InSb/Al2O3纳米同轴电缆。在制备基础上,讨论了氧化铝纳米管、纳米线及InSb/Al2O3纳米同轴电缆的形成机理。
关键词: 氧化铝模板, 纳米线, 纳米管, 纳米电缆
YANG Youwen, YE Min, WU Yucheng, XIE Ting. Fabrication and formation mechanism of one-dimensional alumina based nanomaterials[J]. CIESC Journal, 2008, 59(9): 2371-2376.
杨友文, 叶敏, 吴玉程, 解挺. 一维氧化铝基纳米材料的制备及其形成机理 [J]. 化工学报, 2008, 59(9): 2371-2376.
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: https://hgxb.cip.com.cn/EN/
https://hgxb.cip.com.cn/EN/Y2008/V59/I9/2371
GUO Guangliang,LIU Zhenhua
Heat transfer enhancement of small thermosyphon using carbon nanotube suspensions
Preparation and photoelectricity of Cu2O nanowires
Silica nanotubes synthesized from TEOS with ammonium D,L-tartrate as template and their characterization
Preparation and characterization of highly ordered titanium oxide nanowire arrays by sol-gel template method
Preparation and magnetic properties of Fe21Ni79 alloy nanowire arrays
Effects of ammonia on microstructure and graphitic degree of carbon nanotubes prepared by CVD method