CIESC Journal ›› 2010, Vol. 61 ›› Issue (3): 623-628.
Previous Articles Next Articles
ZHANG Li;YAN Binhang;WU Changning;CHENG Yi
Online:
Published:
章莉;颜彬航;吴昌宁;程易
Abstract:
A gas-solids fast separator was studied for its potential application in the process of coal pyrolysis to acetylene in plasma. The CFD method was employed to simulate the flow behavior in the gas-solids fast separator based on the realizable k-ε turbulence model and the discrete particle model(DPM).The separation efficiency and residence time of gas phase in the gas-solids fast separator could be calculated. The numerical simulations were validated by the experimental results at a low velocity of the inlet gas(e. g. ,4 m·s-1).With the increase of gas velocity at the inlet,the separation efficiency was increased,and the residence time of gas phase was reduced accordingly. The separation efficiency approached 100% when particle diameter was larger than 20 μm. When inlet velocity was 100 m·s-1,the mean residence time of gas phase was about 35 ms. To be noted,the performance of the gas-solids fast separator could be improved,for example by shortening the length of the separator,with a reduced residence time of gas phase at ~20 ms. It is expected that the gas-solids fast separator can meet the stringent demand of the coal pyrolysis to acetylene process for the milliseconds reaction,quench and separation.
Key words: 超短接触反应器, 气固快分, 停留时间, 分离效率, 煤裂解
超短接触反应器,
关键词: 超短接触反应器, 气固快分, 停留时间, 分离效率, 煤裂解
ZHANG Li, YAN Binhang, WU Changning, CHENG Yi. Numerical simulation of gas-solids fast separator in ultra-short contact reactor[J]. CIESC Journal, 2010, 61(3): 623-628.
章莉, 颜彬航, 吴昌宁, 程易. 超短接触反应器气固快分装置的数值模拟 [J]. 化工学报, 2010, 61(3): 623-628.
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: https://hgxb.cip.com.cn/EN/
https://hgxb.cip.com.cn/EN/Y2010/V61/I3/623
NI Jianjun;GUO Qinghua;LIANG Qinfeng;YU Zunhong;YU Guangsuo
Stochastic modeling of particle residence time distribution in impinging-streams gasifier
Removal of chromium ion from water by using ferrous coprecipitation foam separation
Mixing and transport of partcles in rotating cone
Diagnosis of membrane passage defects for reverse osmosis spiral wound membrane module
Thermo-sensitive and separation properties of poly(N-isopropylacrylamide) hydrogels with enhanced surface crosslinking
ZHOU Guangda;CAO Kun ;YAO Zhen;LI Bogeng;HU Guohua
Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder