• 化工过程与装备 • Previous Articles     Next Articles

Simulation and optimization of shale oil condensation recovery process

LIU Yongwei1,CHEN Juanjuan2,WANG Bo1,LI Xingang2,XIAO Shuangquan1,HUANG Guoqiang2,WEI Na2,SUI Hong2   

  1. (1 New Energy Office,Daqing Oilfield Limited Company,PetroChina,Daqing 163453,Heilongjiang,China;2School of Chemical Engineering and Technology,Tianjin University,Tianjin 300072,China)
  • Online:2011-03-15 Published:2011-03-05

页岩油冷凝回收工艺模拟及优化

刘永卫1,陈娟娟2,王 波1,李鑫钢2,肖双全1,黄国强2,魏 娜2,隋 红2   

  1. (1大庆油田有限责任公司新能源办公室,黑龙江 大庆 163453;2天津大学化工学院精馏技术国家工程研究中心,天津 300072)

Abstract:

After an in-depth study of shale oil condensation recovery processprocess simulation software PRO/II was used to simulate the process. The simulation results were analyzedand the process was optimized aiming the shortcomings. Firstlyin the optimized process the amount of circulating water was reduced to 215 000 kg/hand the energy consumption required for water circulation was also reduced. Secondlyin the optimized process countercurrent washing tower was used instead of cocurrent washing tower and the gas-liquid separator in the original processso the number of equipment required in the process was reduced. The countercurrent washing tower could reduce the heavy oil components in the top off-gaswhich was good for succeeding  equipment and process design.

摘要:

通过对页岩油冷凝回收系统工艺的深入研究,并运用PRO/II流程模拟软件对水洗工艺流程进行模拟,分析模拟结果,针对现有流程的缺点进行流程优化。优化后所需的循环水量减少了119 000 kg/h,从而减少了氨水循环过程所需的能耗,符合节能环保的要求。同时优化流程用逆流塔代替了并流水洗塔和气液分离器,工艺流程所需的设备减少,节约了设备费,并且使塔顶气相中重组分更少,有利于后续设备和工艺设计。