CIESC Journal ›› 2015, Vol. 66 ›› Issue (5): 1854-1860.DOI: 10.11949/j.issn.0438-1157.20141734

Previous Articles     Next Articles

Steam explosion and esterification modification of rice straw for oil spill absorption material

PENG Li1, LIU Changjian1, LIU Baijun1, CHU Shengli2, LUAN Guohua2, PEI Yuqi2   

  1. 1 School of Chemical Engineering, China University of Petroleum, Beijing 102249, China;
    2 CNPC Research Institute of Safety & Environment Technology, Beijing 102249, China
  • Received:2014-11-24 Revised:2015-02-03 Online:2015-05-05 Published:2015-05-05

水稻秸秆蒸汽爆破-酯化改性制备吸油材料

彭丽1, 刘昌见1, 刘百军1, 储胜利2, 栾国华2, 裴玉起2   

  1. 1 中国石油大学(北京)化学工程学院, 北京 102249;
    2 中国石油安全环保技术研究院应急技术研究所, 北京 102249
  • 通讯作者: 刘昌见

Abstract: A natural organic oil spill adsorption material was developed by steam explosion and esterification modification of rice straw. The oil-absorption capacity and water-absorption capacity of the raw rice straw were 5.66 g·g-1 and 7.59g·g-1, respectively. The conditions of esterification modification of rice straw were optimized. The optimal reaction temperature, catalyst concentration and reaction time were 80℃, 0.75%, 6 h, respectively. The oil-absorption capacity and water-absorption capacity of the modified rice straw were 8.54 g·g-1 and 0.10 g·g-1, respectively. Furthermore, the rice straw before and after modification were characterized by BET, XRD, FT-IR. The modified rice straw had larger pore diameter after steam explosion, appearance of non-crystallizing state and acetyl group of characteristic peak after esterification, which proved the feasibility of esterification modification of rice straw.

Key words: rice straw, steam explosion, esterification, oil spill, absorbent

摘要: 以水稻秸秆为原料进行蒸汽爆破-酯化改性制备溢油吸附材料。未改性水稻秸秆有一定的吸油能力,其饱和吸油倍率、吸水倍率分别为5.66 g·g-1,7.59 g·g-1。通过对水稻秸秆进行蒸汽爆破-酯化改性后,发现其亲油疏水性能得到显著改善。对酯化反应的影响因素进行系统考察,得到优化的改性条件为反应温度为80℃,催化剂对甲基苯磺酸酐浓度为0.75%,反应时间为6 h。改性后水稻秸秆吸油倍率为8.54 g·g-1,吸水倍率为0.10 g·g-1。对蒸汽爆破-酯化改性前后水稻秸秆材料进行BET、XRD以及FT-IR表征,发现爆破处理后材料的孔径增大;非结晶态以及乙酰基特征峰的出现说明水稻秸秆发生酯化改性反应。

关键词: 水稻秸秆, 蒸汽爆破, 酯化改性, 溢油, 吸附剂

CLC Number: