Abstract:

Warpage is a serious defect for the injection-molded parts.In this work, an approximate optimization method based on the Kriging model was proposed to do warpage optimization.Molflow software was used to analyze the warpage deformation of the injection-molded parts, and mold temperature, melt temperature, injection time and packing pressure were regarded as process parameters.The Kriging model provided the approximate mapping relationship between warpage and the parameters, replacing the warpage analysis of Moldflow in the optimization.Taking the cover of a phone for example, the result of the example showed that the optimization method could decrease effectively warpage deformation.Moreover, the optimization result and influence factors were analyzed in detail.

Key words:

翘曲变形, 优化设计, Kriging模型

摘要：

注塑制品的翘曲变形是一种严重的缺陷;本文提出一个最小化制品翘曲变形的近似优化方法。该方法用Moldflow软件进行制品的翘曲变形分析;借助于Kriging模型建立翘曲与优化参量间的函数关系;然后利用所建立的近似函数进行优化设计。以手机壳制品为例;用模具温度、熔体温度、注射时间和保压压力做设计变量;对制品进行了翘曲优化设计。结果表明;所提出的方法可以有效地减小制品的翘曲变形;最后对优化结果及影响因素做了较详尽的分析。

关键词:

翘曲变形, 优化设计, Kriging模型