CIESC Journal ›› 2014, Vol. 65 ›› Issue (11): 4222-4230.DOI: 10.3969/j.issn.0438-1157.2014.11.002

• 流体力学与传递现象 • 上一篇    下一篇

基于径向力平衡的鼓泡塔二维流体力学模型

李兆奇, 王丽军, 管小平, 成有为, 李希   

  1. 浙江大学化学工程与生物工程学系, 浙江 杭州 310027
  • 收稿日期:2014-04-17 修回日期:2014-06-30 出版日期:2014-11-05 发布日期:2014-11-05
  • 通讯作者: 王丽军
  • 基金资助:
    国家高技术研究发展计划项目(2011AA05A205);国家自然科学基金项目(U1162125,U1361112).

2-D hydrodynamic model of bubble column based on lateral-force balance

LI Zhaoqi, WANG Lijun, GUAN Xiaoping, CHENG Youwei, LI Xi   

  1. Department of Chemical Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China
  • Received:2014-04-17 Revised:2014-06-30 Online:2014-11-05 Published:2014-11-05
  • Supported by:
    supported by the National High Technology Research and Development Program of China(2011AA05A205) and the National Natural Science Foundation of China(U1162125, U1361112).

摘要: 提出了一种鼓泡塔二维轴对称流体力学模型,模型中将气泡所受的升力以及湍动扩散力作为形成塔内气含率稳定分布的主要机制.采用Fluent 6.3流体力学软件求解模型,能得到稳定的二维流场,气含率与液速分布与实验值吻合良好,模型能准确反映表观气速(0.12~0.62 m·s-1)以及塔径(ø200 mm、ø500 mm、ø800 mm)对流型的影响.利用该模型对更大直径鼓泡塔的流动参数进行了预测,结果与文献给出的经验关联式相符.

关键词: 鼓泡塔, 流体力学模型, 表观气速, 塔径

Abstract: A 2-D axisymmetric hydrodynamic model of bubble column was developed, by considering lift force and turbulent dispersion force on bubbles as main mechanism of stable distribution of gas holdup. A commercial code Fluent 6.3 was used for calculation, and the model gave a stable 2-D flow pattern, in which distributions of gas holdup and liquid velocity were in good agreement with experimental data. The model correctly demonstrated the influence of superficial gas velocity (0.12—0.62 m·s-1) and column diameter (ø200 mm, ø500 mm, ø800 mm) on flow pattern. Furthermore, hydrodynamic variables predicted by the model in larger scale columns agreed with published empirical correlations.

Key words: bubble column, hydrodynamic model, superficial gas velocity, column diameter

中图分类号: