基于广义原理的对流换热热阻计算方法及检验

doi:10.3969/j.issn.0438-1157.2014.z1.047

化工学报 ›› 2014, Vol. 65 ›› Issue (S1): 292-296.DOI: 10.3969/j.issn.0438-1157.2014.z1.047

基于广义原理的对流换热热阻计算方法及检验

冷学礼^1,2, 田茂诚¹, 邱燕¹, 柏超¹

1. 山东大学能源与动力工程学院, 山东济南 250061;
2. 山东大学机械工程博士后科研流动站, 山东济南 250061

收稿日期:2014-02-10 修回日期:2014-02-15 出版日期:2014-05-30 发布日期:2014-05-30
通讯作者: 田茂诚
基金资助:
山东省科技发展计划项目（2012GGX10421）。

Convection thermal resistance calculation method and validation based on generalized theory

LENG Xueli^1,2, TIAN Maocheng¹, QIU Yan¹, BAI Chao¹

1. School of Energy & Power Engineering, Shandong University, Jinan 250061, Shandong, China;
2. Mechanical Engineering Station for Doctoral Research, Shandong University, Jinan 250061, Shandong, China

Received:2014-02-10 Revised:2014-02-15 Online:2014-05-30 Published:2014-05-30
Supported by:
supported by the Science Development Project of Shandong Province (2012GGX10421).

摘要/Abstract

摘要： 使用积耗散与广义热阻原理分析对流换热中耗散与广义换热温差间的关系，提出了控制体内三种广义热阻值计算方法的表达形式，并在二维平行通道层流换热中进行检验，与传统热阻计算方法作比较后发现传统的表面传热系数不能准确体现研究区域内的热导（阻）能力，三种广义热阻计算方法的表达形式相互吻合，结果一致，且对流换热退化为热传导时与定义式和热传导计算结果统一，表明是可靠的对流热阻计算方法；使用该方法研究二维平行通道内入口段的对流换热，发现广义热阻值的普遍趋势是随流动发展热阻增大，符合对流换热的基本理念，定义式热阻则表现变化很大，受温差与壁面热流量影响明显；检验中发现了广义式热阻与定义式热阻的差异是由于定义式热阻为简化表达导致。

关键词: 对流换热, 广义热阻, 表面传热系数, 牛顿冷却定律

Abstract: The entransy dissipation and generalized thermal resistance theory is utilized in researching dissipation and generalized transfer temperature difference in convection. Three computing forms of heat transfer resistance for control volume is proposed and validated by two-dimensional laminar convection in parallel channels. Traditional surface heat transfer coefficient does not accurately reflect the thermal conductivity (resistance) capabilities of control volume while compare with it. The generalize resistance method is reliable for two reasons, first is that three forms of expression consistent with others perfectly, second is that the thermal resistance consistent with conduction while convection degenerate to conduction. The validation of convection in parallel flow shows that the basically general trend of generalized thermal resistance increases with flow development, consistent with basic idea of convective heat transfer. On the while, the definition style of thermal resistance does not increase with flow in several circumstance and influenced by temperature and transfer quantity obviously, due to the definition type simplify the expression of thermal resistance construction.

Key words: convection, generalized thermal resistance, heat transfer coefficient, Newton’s cooling law

中图分类号:

TK124

冷学礼, 田茂诚, 邱燕, 柏超. 基于广义原理的对流换热热阻计算方法及检验[J]. 化工学报, 2014, 65(S1): 292-296.

LENG Xueli, TIAN Maocheng, QIU Yan, BAI Chao. Convection thermal resistance calculation method and validation based on generalized theory[J]. CIESC Journal, 2014, 65(S1): 292-296.

参考文献 19

[1]	Eckert E R G, Drake R M. Analysis of Heat and Mass Transfer (Int. Student Edition) [M]. McGraw-Hill, 1972:304-306
[2]	Hans D B, Karl S. Heat and Mass Transfer[M].2nd ed. Berlin:Springer,2006:343-344
[3]	Qian Xianyi(钱显毅), Chi Xuelian(池雪莲),Cai Yihuan(蔡译寰). Applying Physics(应用物理学) [M]. Nanjing:Southeast University Press,2007:98-100
[4]	Ren Zepei(任泽霈). Convective Heat Transfer (对流换热) [M]. Beijing:Higher Education Press,1998:2-4
[5]	Isachenko V P, Osipova V A,Sukomel A S. Heat Transfer[M]. Moscow:MIR Publishers, 1975:163-165
[6]	Yang Shiming(杨世铭). Heat Transfer (换热学) [M]. Beijing:Higher Education Press,1980:146-148
[7]	Guo Zengyuan(过增元), Liang Xingang(梁新刚), Zhu Hongye(朱宏晔). Entransy-a physical quantity to describe heat transfer ability[J]. Progress in Natural Science(自然科学进展), 2006, 16:1288-1296
[8]	Guo Zengyuan(过增元), Cheng Xinguang(程新广), Xia Zaizhong(夏再忠). Least dissipation principle and applying in conduction optimization[J]. Chinese Sci. Bulletin(科学通报), 2003, 48: 21-25 [9 ]Wu Jing,Cheng Xuetao. Generalized thermal resistance and its application to thermal radiation based on entransy theory[J]. Int. J. Heat Mass Transfer, 2013, 58: 374-381
[10]	Cheng Xinguang(程新广), Xia Zaizhong(夏再忠), Li Zhixin(李志信). Optimization of heat conduction: thermal dissipation and optimal thermal conductivity distribution[J]. J. Engineering Thermophysics(工程热物理学报), 2002, 23:715-717
[11]	Xiao Qinghua, Chen Lingen, Sun Fengrui. Constructal entransy dissipation rate minimization for umbrella-shaped assembly of cylindrical fins[J]. Sci. China Tech. Sci., 2011, 54: 211-219
[12]	Cheng Xinguang(程新广), Meng Ji'an(孟继安), Guo Zengyuan(过增元). Potential capacity dissipation minimization and entropy generation minimization in heat conduction optimization[J]. J. Engineering Thermophysics(工程热物理学报), 2005, 26:1034-1036
[13]	Chen Qun(陈群), Ren Jianxun(任建勋). The generalized thermal resistance in convection and relation to entransy dissipation[J]. Chinese Science Bulletin(科学通报),2008, 53:1730-1736
[14]	Li Xuefang(李雪芳), Guo Jiangfeng(郭江峰), Xu Mingtian(许明田). Entransy dissipation minimization for optimization of heat exchanger design[J]. Chinese Science Bulletin(科学通报), 2011,56:869 - 873
[15]	Xu Yunchao,Chen Qun.Minimization of mass for heat exchanger networks in spacecrafts based on the entransy dissipation theory[J].Int.J.Heat Mass Transfer,2012,55(9):5148-5156
[16]	Leng Xueli(冷学礼),Tian Maocheng(田茂诚),Zhang Guanmin(张冠敏).The allied entransy dissipation function in convective heat transfer[J].J.Engineering Thermophysics (工程热物理学报),2011,32(11):1361-1364
[17]	Michael I Davidzon.Newtons law of cooling and its interpretation [J].Int.J.Heat Mass Transfer,2012,55(10):5397-5402
[18]	Ugo Besson.The history of the cooling law:when the search for simplicity can be an obstacle?[J].Sci. & Educ.,2012,21:1085-11110
[19]	Eckert E R G.Newtons law of cooling viewed in the light todays knowledge of heat transfer[J].Strojarstvo,2002,44(1):35-38

[1]	裴后举, 蒋彦龙, 施红, 崔永龙, 陈常栋, 钱晓辉. 基于M-L湍流模型的浮空器强迫对流换热[J]. 化工学报, 2020, 71(S1): 136-141.
[2]	许文杰, 李敏霞, 郭强. 润滑油对超临界二氧化碳对流换热特性的影响[J]. 化工学报, 2018, 69(5): 1982-1988.
[3]	祝叶, 管宁, 李栋, 赵孝保, 刘志刚. 不同截面形状超疏水微肋阵内对流换热特性[J]. 化工学报, 2017, 68(1): 63-71.
[4]	严俊杰, 祝银海, 芦泽龙, 姜培学. 超临界压力碳氢燃料瞬态加热响应特性[J]. CIESC Journal, 2015, 66(S1): 65-70.
[5]	卢小平, 俞树荣, 余建平, 何爱玲, 郭丹丹. 流动换热强化的能量传递转换机制及其最小熵产原理[J]. 化工学报, 2014, 65(S1): 336-339.
[6]	孙斌，赵朝. 内螺纹管内金属氧化物-水纳米流体传热特性的数值模拟[J]. 化工进展, 2014, 33(03): 563-567.
[7]	魏巍, 陈群, 任建勋. 温差驱动型自反馈对流换热系统[J]. 化工学报, 2013, 64(6): 1934-1938.
[8]	李振兴，张立志. 空气横掠中空纤维膜管束的流动与传热性能[J]. 化工学报, 2012, 63(S1): 23-27.
[9]	刘巍，朱春玲. 分流板结构对微通道平行流蒸发器性能的影响[J]. 化工学报, 2012, 63(3): 761-766.
[10]	冷学礼, 田茂诚, 张冠敏, 胡洪伟. 振动圆管外对流换热特性的场协同机理[J]. 化工学报, 2012, 63(11): 3440-3445.
[11]	卢小平，俞树荣. 对流换热场协同的散度效应 [J]. CIESC Journal, 2011, 62(9): 2464-2468.
[12]	张益波, 任佳, 潘海鹏, 戴文战. 一类热定型机换热器的动态建模方法 [J]. 化工学报, 2011, 62(8): 2360-2366.
[13]	于同敏，徐华，田慧卿，徐斌，王乐. 微注塑成型充模流动中的对流换热行为 [J]. CIESC Journal, 2011, 62(7): 1824-1830.
[14]	刘志刚，张承武，管宁，王建梅. 尺度效应对低Reynolds数下微/小柱群通道内对流换热的影响 [J]. CIESC Journal, 2011, 62(7): 1852-1859.
[15]	赵孝保，卢铃，刘志刚，朱晓华，李奇贺. 微/小圆柱针肋热沉传热特性 [J]. CIESC Journal, 2011, 62(3): 672-677.

基于广义原理的对流换热热阻计算方法及检验

Convection thermal resistance calculation method and validation based on generalized theory

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 19

相关文章 15

编辑推荐

Metrics

本文评价