高温熔融高炉渣颗粒相变冷却特性分析

doi:10.3969/j.issn.0438-1157.2014.z1.046

化工学报 ›› 2014, Vol. 65 ›› Issue (S1): 285-291.DOI: 10.3969/j.issn.0438-1157.2014.z1.046

高温熔融高炉渣颗粒相变冷却特性分析

刘小英^1,2, 朱恂^1,2, 廖强^1,2, 王宏^1,2

1. 重庆大学低品位能源利用及系统教育部重点实验室, 重庆 400030;
2. 重庆大学工程热物理研究所, 重庆 400030

收稿日期:2014-02-11 修回日期:2014-02-21 出版日期:2014-05-30 发布日期:2014-05-30
通讯作者: 朱恂
基金资助:
国家重点基础研究发展计划项目（2012CB720403）。

Theoretic analysis on transient solidification behaviors of a molten blast furnace slag particle

LIU Xiaoying^1,2, ZHU Xun^1,2, LIAO Qiang^1,2, WANG Hong^1,2

1. Key Laboratory of Low-grade Energy Utilization Technologies and Systems, Ministry of Education, Chongqing University, Chongqing 400030, China;
2. Institute of Engineering Thermophysics, Chongqing University, Chongqing 400030, China

Received:2014-02-11 Revised:2014-02-21 Online:2014-05-30 Published:2014-05-30
Supported by:
supported by the National Basic Research Program of China(2012CB720403).

摘要/Abstract

摘要： 采用温度法模型对高温熔融高炉渣颗粒的相变冷却特性进行了分析，考虑颗粒固液相热导率随温度的变化及颗粒与环境的辐射换热，获得了高温熔渣颗粒内的温度分布以及相界面位置随时间的推移过程。讨论了变热导率、换热条件、颗粒尺寸，冷却流体速度和温度对相变冷却过程的影响，结果表明：热导率的变化使得颗粒冷却凝固时间延长，高温辐射换热极大加快了冷却速率；颗粒直径增加，相界面移动速度降低，凝固时间增加；冷却流体速度增加，温度降低，相界面移动速度增加，凝固时间缩短。

关键词: 粒化高炉渣, 相变换热, 温度场, 相界面, 数值模拟, 模型

Abstract: A theoretic analysis is performed with temperature model on transient air cooling and solidification behaviors of a spherical molten slag particle. With considering the variation of thermal conductivity with temperature and the radiation between slag and environment, the temperature distribution and the transient moving of phase-change interface inside the particle are obtained by applying the finite difference method. The effects of variable thermal conductivity, heat transfer boundary condition, slag particle size, air flow rate and initial temperature of the slag particle are discussed. The simulation results indicate that the variable thermal conductivity of the slag extends the solidification process, while the radiation significantly improves the cooling speed. Meanwhile, the solidification process is speeded up with increasing air flow rate and decreasing particle size. The cooling and solidification process is prolonged for the slag particle with higher initial temperature.

Key words: granulate blast furnace slag, phase-change heat transfer, temperature field, phase interface, numerical simulation, model

中图分类号:

TK01

刘小英, 朱恂, 廖强, 王宏. 高温熔融高炉渣颗粒相变冷却特性分析[J]. 化工学报, 2014, 65(S1): 285-291.

LIU Xiaoying, ZHU Xun, LIAO Qiang, WANG Hong. Theoretic analysis on transient solidification behaviors of a molten blast furnace slag particle[J]. CIESC Journal, 2014, 65(S1): 285-291.

参考文献 20

[1]	Xu Yongtong(徐永通), Ding Yi(丁毅),Cai Zhangping(蔡漳平),Liu Qing(刘青),Huang Ye(黄晔), Ye Shufeng(叶树峰). Development of heat recovery from blast furnace slag using dry granulation methods[J]. China Metallurgy(中国冶金),2007, 17(9):1-8
[2]	Dai Xiaotian(戴晓天),Qi Yuanhong(齐渊洪),Zhang Chunxia(张春霞). Development of molten slag dry granulation and heat recovery in steel indurstry[J]. Journal of Iron and Steel Research(钢铁研究学报),2008,20(7):1-6
[3]	Lazaridis A. Numerical solutions of the multidimensional solidification (or melting) problems[J ]. Int. J. Heat Transfer, 1970, 13: 1459-1477
[4]	Sham sunder N, Sparrow E M. Analysis of multidimensional conduction phase change via the enthalpy model[J]. J. Heat Transfer, 1975, 97: 330-340
[5]	Cui Zhanfeng(崔占峰), Xu Dunqi(徐敦颀), Lin Jifang(林纪方). Heat transfer in freezing of cylindrically shaped foodstuffs [J].Journal of Chemical Industry and Engineering(China) (化工学报), 1989 (3) : 315-321
[6]	Guo Kuanliang(郭宽良). Numerical Calculation of Heat Transfer(数值计算传热学)[M]. Hefei:Anhui Science and Technology Press,1987:5
[7]	Song Youzheng(宋又正).The heat transfer problem of phase change heat reservoir[J]. Acta Energiae Solaris Sinica(太阳能学报), 1981, 2 (4) : 385-395
[8]	Chen Linhui(陈林辉), Tian Huaizhang(田怀璋), Wang Shi(王石), Chen Jingliang(陈敬良). Research on the stearic energy storage system with solid-liquid phase change under the second boundary condition[J]. Journal of Xi'an Jiaotong University(西安交通大学学报), 2004, 38(11):1128-1131
[9]	Wu Zhigen(吴志根),Zhao Changying(赵长颖),Gu Qingzhi(顾清之). Heat transfer enhancement of high temperature thermal energy storage using porous materials[J]. CIESC Journal(化工学报),2012,23(s1):119-122
[10]	Zhang Xuelai(章学来), Yu Shuxuan(于树轩), Lin Yuanpei(林原培), Yu Mei(于美). Experimental research on heat recovery of condensation with phase change thermal storage[J]. CIESC Journal(化工学报),2010,61(s2):43-48
[11]	Li Donghui(李东辉), Qiu Yiqing(邱以清),Liu Xianghua(刘相华),Wang Guodong(王国栋). Numerical simulation of continuous casting during solidification and heart-transferring process[J]. Foundry Technology (铸造技术),2004, 25(7):529-531
[12]	Ni Zhuo(倪卓),Shi Kaiyong(石开勇),Huang Zhibin(黄志斌),Luan Lan(栾兰),Xing Feng(邢锋). Synthesis and characterization of UF/paraffin PCM microcapsules[J]. Journal of Shenzhen University :Science and Engineering(深圳大学学报:理工版),2010,27(1):65-69
[13]	Li Xing(李兴),Chen Ying(陈颖),Mo Songping(莫松平),Jia Lisi(贾莉斯). Influence of surfactant on characteristics of solid-liquid phase change for water-based nanofluid[J]. CIESC Journal(化工学报),2013,64(9):3324-3330
[14]	Chen Zhenqian(陈振乾),Gu Mingwei(顾明伟),Shi Mingheng(施明恒). Numerical simulation on phase change heat transfer of paraffin in metal foams[J].Journal of Thermal Science and Technology(热科学与技术),2010,9(2):106-111
[15]	Xia Li(夏莉),Zhang Peng(张鹏),Zhou Yuan(周圆),Wang Ruzhu(王如竹). Study on the charging/discharging characteristics of paraffin and paraffin/expanded graphite composite material[J].Acta Energiae Solaris Sinica(太阳能学报),2010,31(5):610-614
[16]	Guan Jianchun(管建春),Zhu Hua(朱华),Adel M.S.(阿迪尔),Tu Chuanjing(屠传经). Numerical analysis of heat transfer with phase change in cool storage ball[J].Journal of Zhejiang University(浙江大学学报), 1999, 33(1):85-89
[17]	Bai Fengwu(白凤武),Lu Wenqiang(卢文强). Solving solid-liquid phase change process in sphere under convective heat transfer boundary conditions by moving heat sources method[J]. Journal of the Graduate School of the Chinese Academy of Sciences(中国科学院研究生院学报), 2003, 20(1):13-21
[18]	Sassi M,Raynaud M. Solution of moving boundaries problem[J]. Numerical Heat Transfer,1998,34:271-2863
[19]	Pan Yuhua, Witt Peter J, Xie Dongsheng. CFD simulation of free surface flow and heat transfer of liquid slag on a spinning disc for a novel dry slag granulation process//Seventh International Conference on CFD in the Minerals and Process Industries CSIRO[C]. Melbourne, Australia, 2009
[20]	Whitaker S. Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and flow in packed bids and tube bundles[J]. AIChE J.,1972,18:361-372

高温熔融高炉渣颗粒相变冷却特性分析

Theoretic analysis on transient solidification behaviors of a molten blast furnace slag particle

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[2]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[3]	连梦雅, 谈莹莹, 王林, 陈枫, 曹艺飞. 地下水预热新风一体化热泵空调系统制热性能研究[J]. 化工学报, 2023, 74(S1): 311-319.
[4]	金正浩, 封立杰, 李舒宏. 氨水溶液交叉型再吸收式热泵的能量及分析[J]. 化工学报, 2023, 74(S1): 53-63.
[5]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[6]	周晓庆, 李春煜, 杨光, 蔡爱峰, 吴静怡. 液滴撞击不同曲率过冷波纹面结冰动力学行为及机理研究[J]. 化工学报, 2023, 74(S1): 141-153.
[7]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[8]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[9]	王浩, 王振雷. 基于自适应谱方法的裂解炉烧焦模型化简策略[J]. 化工学报, 2023, 74(9): 3855-3864.
[10]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[11]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[12]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[13]	于旭东, 李琪, 陈念粗, 杜理, 任思颖, 曾英. 三元体系KCl + CaCl₂ + H₂O 298.2、323.2及348.2 K相平衡研究及计算[J]. 化工学报, 2023, 74(8): 3256-3265.
[14]	诸程瑛, 王振雷. 基于改进深度强化学习的乙烯裂解炉操作优化[J]. 化工学报, 2023, 74(8): 3429-3437.
[15]	闫琳琦, 王振雷. 基于STA-BiLSTM-LightGBM组合模型的多步预测软测量建模[J]. 化工学报, 2023, 74(8): 3407-3418.